OBDPEAK FHD 1080P Car Rear View Kamera Kullanım Kılavuzu

1. Giriş

This manual provides detailed instructions for the installation, operation, and maintenance of your OBDPEAK FHD 1080P Car Rear View Camera. Designed for seamless integration with streaming dashcams and center console screens, this camera offers high-definition video, a wide viewing angle, and essential parking assistance features to enhance your driving safety.

The camera is compatible with OBDPEAK dash cam models K2, K2 PRO, K4, K60 Pro, K8, K8s, K8 Pro, T30, K50, D80, A8, H330, and other dashcams supporting a 4Pin 1080P rear camera AV-IN with a 2.5mm jack. Please note that it does not support T20/K3 models or car DVD systems.

OBDPEAK FHD 1080P Car Rear View Kamera

2. Özellikler

Key features: FHD 1080P, 140° View Angle, Reversing Aid

3. Paket İçeriği

Paketiniz aşağıdaki öğeleri içermelidir:

• OBDPEAK FHD 1080P Rear View Kamera
• Video Cable (6M, 10M, or 15M, depending on your selection)

Arka View Camera with 6M Cable (exampTHE)

4. Kurulum

4.1. Desteklenen Modeller

This camera supports streaming dashcams or center console screens with a rear camera AV-IN, 2.5mm, 4Pin, 1080P input. Compatible OBDPEAK models include K2, K2 PRO, K4, K60 Pro, K8, K8s, K8 Pro, T30, K50, D80, A8, H330.

4.2. How to Install the Rear Camera

1. Insert the 2.5mm jack of the camera cable into the AV-IN hole of your dashcam or screen.
2. Install the rear camera in the desired position on your vehicle (e.g., above the license plate).
3. Connect the red wire from the camera cable to the positive pole of your car's reversing light.
4. When reversing, the screen will automatically display the image from the rear camera.

Installation of the rear camera: Connect red wire to reverse light+, connect camera to AV-IN interface on dash cam.

4.3. Camera Installation Methods

The camera can be installed in various positions, typically at the front or rear of the vehicle.

Cam install method ①: Front install

Cam install method ②: Rear install

4.4. How to Choose the Appropriate Cable Length

Selecting the correct cable length is crucial for proper functionality and to prevent damage to your dashcam.

• 6M/10M Cable: These cables do not have a voltage control chip and are suitable only for vehicles with a 12V power supply (e.g., most household cars or small trucks).
• 15M Cable: This cable is equipped with a voltage control chip. It can reduce a 24V voltage to approximately 12V, ensuring stable signal transmission to the dashcam. This cable is necessary for large trucks or vehicles with a 24V power supply.

Important: For 24V vehicles, it is mandatory to choose a 15M cable. Using a 10M cable with a 24V system may cause damage to the dashcam motherboard and result in a blue screen image.

Cable length compatibility for 12V and 24V vehicles

Cilttage reducing chip in the 15M cable for 24V vehicles

5. Operasyon

5.1. Automatic Display on Reversing

Once correctly installed and connected to the reversing light, the camera feed will automatically display on your dashcam screen when you engage reverse gear. The camera provides clear, stable images with parking assistance lines.

Reverse Assistance with dynamic parking lines

5.2. Night Vision Functionality

The camera supports 1080P Super Night Vision, ensuring clear visibility even in low-light conditions or at night.

FH 1080P + Super Night Vision in action

5.3. Display Effect Examples

The camera provides consistent image quality across various lighting conditions. Below are examples comparing a phone photo to the camera's display effect at different ambient brightness levels:

Display effect at 50% ambient brightness

Display effect at 100% ambient brightness

Display effect at 10% ambient brightness

Display effect at 25% ambient brightness

5.4. Video Gösterimi

6. Bakım

• Temizlik: Kamera lensini düzenli olarak yumuşak bir bezle temizleyin.amp cloth to ensure clear image quality. Avoid using harsh chemicals that may damage the lens or housing.
• Su geçirmez: The camera has an IP67/IP68 waterproof rating, making it resistant to dust and water immersion. However, avoid high-pressure water jets directly on the camera.
• Kablo Denetimi: Periodically check the video cable for any signs of wear, cuts, or damage. Ensure all connections are secure.

7. Sorun Giderme

7.1. No Image or Blue Screen

• Ensure the 2.5mm 4Pin AV-IN connector is fully inserted into the dashcam.
• Verify that the red wire is correctly connected to the positive pole of the car's reversing light.
• Check if the cable length is appropriate for your vehicle's voltage (15M cable for 24V vehicles). Using a 10M cable with a 24V system can cause a blue screen or damage.

7.2. Image is Inverse

If the image appears inverse, it might be due to incorrect wiring or a setting on your dashcam. Ensure the camera is installed in the correct orientation. If the issue persists, consult your dashcam's manual for image flip or mirror settings.

7.3. Parking Lines Not Appearing

Ensure the red wire is properly connected to the reversing light. The guiding lines are typically activated when the reverse gear is engaged.

7.4. Can the Reverse Line be Removed?

The reverse line (guiding line) cannot be physically removed from the camera's output. If you do not wish to see the reverse line, you can choose not to connect the red wire to the reverse light. However, in this case, the camera screen will not automatically turn on when reversing, and you would need to manually switch to the camera view on your dashcam.

8. Kullanıcı İpuçları

• Kablo yönetimi: When installing, route the cable carefully to avoid pinching or excessive bending, which can damage the internal wires.
• Sonlandırmadan Önce Test Edin: Before securing all components, perform a quick test to ensure the camera functions correctly and the display is clear.
• Optimum Yerleştirme: Experiment with different mounting positions for the rear camera to find the best viewing angle for your vehicle and parking habits.

9. Garanti ve Destek

For warranty information and technical support, please refer to the seller's policies or contact OBDPEAK customer service directly. Keep your purchase receipt as proof of purchase.

For additional documentation, you may refer to the official user manual PDF: Kullanım kılavuzu (PDF)