giriiş
This manual provides comprehensive instructions for the VAF7640 replacement remote control, designed to operate various Yamaha Home Theater Audio Sound Bar models, including ATS-1080 and YAS-108. Please read this manual carefully before using the remote control to ensure proper operation and to maximize your audio experience.
Güvenlik Bilgileri
- Pilleri çocukların erişemeyeceği yerlerde saklayın.
- Eski ve yeni pilleri veya farklı pil türlerini karıştırmayın.
- Uzaktan kumanda uzun süre kullanılmayacaksa, sızıntıyı önlemek için pilleri çıkarın.
- Kullanılmış pilleri yerel düzenlemelere göre atın.
- Uzaktan kumandayı doğrudan güneş ışığına, ısı kaynaklarına veya neme maruz bırakmaktan kaçının.
Paket İçeriği
- 1 x VAF7640 Replacement Remote Control
Note: Battery (1 x CR 2025) is not included and must be purchased separately.
Özellikler
| Özellik | Detay |
|---|---|
| Model Numarası | VAF7640 |
| Uyumlu Marka | Yamaha için |
| Kullanmak | Audio / Video Players (Sound Bars) |
| Kablosuz İletişim | Kızılötesi (IR) |
| Sıklık | 433 MHz |
| Kanal | 1 |
| Malzeme | ABS Malzeme |
| kablosuz Menzil | 5 metreye kadar (görüş hattı) |
| Pil gerekli | 1 x CR 2025 (Coin Cell) |
| APP'yi destekle | HAYIR |
| Sertifikasyon | CE |
Kurmak
Pil Kurulumu
- Uzaktan kumandanın arkasındaki pil bölmesini bulun.
- Slide the battery tray out. The tray is typically located at the bottom of the remote, as shown in the diagram.
- Insert one (1) CR 2025 coin cell battery into the tray, ensuring the positive (+) side faces upwards, as indicated inside the compartment.
- Slide the battery tray back into the remote control until it clicks securely into place.
The remote control is now ready for use. No programming is typically required for this replacement IR remote; it should function directly with compatible Yamaha sound bar models.
Kullanım Talimatları
Point the remote control directly at your Yamaha sound bar's IR receiver. Ensure there are no obstructions between the remote and the sound bar.
Düğme Fonksiyonları
- Power (Orange Button): Turns the sound bar on or off.
- HDMI, TV, ANALOG, BLUETOOTH: Selects the corresponding input source for your sound bar.
- SURROUND, STEREO, 3D SURROUND: Activates different audio sound modes.
- BİLGİ: Displays information about the current settings or input.
- TEMİZ SES: Enhances dialogue clarity.
- BLUETOOTH BEKLEME: Puts the sound bar into Bluetooth standby mode.
- DİMMER: Adjusts the brightness of the sound bar's display.
- BAS UZATMA: Enhances low-frequency sound output.
- SESSİZ: Sesi kapatır veya açar.
- SES (+/-): Increases or decreases the main volume.
- SUBWOOFER (+/-): Increases or decreases the subwoofer volume level.
Bakım
- TemizlikUzaktan kumandayı yumuşak, kuru bir bezle silin. Aşındırıcı temizleyiciler veya çözücüler kullanmayın.
- Pil Değişimi: Replace the CR 2025 battery when the remote's range decreases or it stops responding. Follow the battery installation steps in the Setup section.
- DepolamakKumandayı serin, kuru ve doğrudan güneş ışığından ve aşırı sıcaklıklardan uzak bir yerde saklayın.
Sorun giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Uzaktan kumanda çalışmıyor | Bitmiş veya yanlış takılmış pil | Replace the CR 2025 battery, ensuring correct polarity. |
| Remote has short range or intermittent response | Weak battery; Obstruction between remote and sound bar; Remote not pointed correctly | Replace battery; Remove obstructions; Ensure direct line of sight to sound bar's IR receiver. |
| Specific button not working | Button malfunction; Sound bar not compatible with that specific function | Test other buttons. If only one button fails, the remote may be faulty. Verify your sound bar model supports the function. |
| Sound bar not responding at all | Sound bar is off or unplugged; Sound bar's IR receiver is blocked or faulty | Ensure sound bar is powered on and plugged in. Check sound bar's manual for troubleshooting its IR receiver. |
Kullanıcı İpuçları
Re'den belirli kullanıcı ipuçları mevcut değilviews or Q&A for this product. However, general advice for IR remotes includes:
- Always ensure a clear line of sight between the remote's IR emitter and the sound bar's IR receiver.
- Avoid using the remote in brightly lit environments, especially direct sunlight, as strong light can interfere with IR signals.
- Keep the remote clean to prevent dust or grime from obstructing the IR emitter or buttons.
Garanti ve Destek
For any issues not covered in this manual, or for warranty inquiries, please contact the seller directly through your purchase platform. Keep your purchase receipt or order number handy for faster service.
