giriiş
The TP-LINK TX-6610 is a 1-Port Gigabit GPON Terminal designed to provide high-speed fiber optic network access. It complies with ITU G.984.x GPON standards, offering robust compatibility and performance for your internet connection. This manual provides detailed instructions for setting up, operating, and maintaining your TX-6610 device.
Tepe view of the TP-LINK TX-6610 GPON Terminal.
Paket İçeriği
Başlamadan önce lütfen paketinizin aşağıdaki öğeleri içerdiğinden emin olun:
- TP-LINK TX-6610 GPON Terminal
- RJ45 Ethernet Kablosu
- Network Adapter (Power Supply)
- Hızlı Kurulum Kılavuzu
Kurmak
Follow these steps to set up your TX-6610 GPON Terminal:
- Konumlandırma: Place the TX-6610 in a stable, well-ventilated location, away from direct sunlight and heat sources. Ensure it is within reach of your fiber optic connection and power outlet.
- Fiber optik kabloyu bağlayın: Carefully connect the fiber optic cable from your service provider to the SC/APC Port on the TX-6610. Ensure the connector is clean and properly seated.
- Ethernet Kablosunu Bağlayın: Connect one end of the provided RJ45 Ethernet cable to the Gigabit RJ45 Port on the TX-6610 and the other end to your computer or router.
- Güç Adaptörünü Bağlayın: Plug the network adapter into the power input port on the TX-6610, then plug the other end into a standard electrical outlet.
- Güç Açık: Cihazı açmak için Güç Açma/Kapama Düğmesine basın.
Açılı view of the TX-6610, highlighting the indicator lights and side port.
İşletim
Once the TX-6610 is powered on, observe the indicator lights for its operational status:
- Güç: Sabit yeşil ışık, cihazın açık olduğunu gösterir.
- GPON: Solid green indicates a successful connection to the GPON network. Blinking indicates data transmission.
- LOS (Sinyal Kaybı): If this light is red or off when it should be on, it indicates a problem with the fiber optic connection.
- LAN: Solid green indicates a successful Ethernet connection to a device. Blinking indicates data transmission.
The TX-6610 acts as a bridge between your local network and the GPON fiber network. Configuration is typically handled by your Internet Service Provider (ISP) via OMCI remote management. For advanced settings, you may access the device's web management interface using a web browser, if enabled by your ISP.
Bakım
To ensure the longevity and optimal performance of your TX-6610:
- Cihazı temiz ve tozdan uzak tutun.
- Aşırı ısınmayı önlemek için yeterli havalandırmayı sağlayın.
- Cihazınızı aşırı sıcaklıklara veya neme maruz bırakmaktan kaçının.
- Cihazı açmaya çalışmayın.asing şıkkı, garantiyi geçersiz kılabilir ve sizi elektrik tehlikelerine maruz bırakabilir.
- If the device is unresponsive, you can use the SIFIRLAMA Düğmesi. Press and hold the RESET button for approximately 5-10 seconds to restore the device to its factory default settings. This will erase any custom configurations.
Sorun giderme
If you encounter issues with your TX-6610, refer to the following common problems and solutions:
- Elektrik Yok Işığı: Ensure the power adapter is securely connected to both the device and the electrical outlet. Try a different outlet.
- LOS Light is Red/Off: This indicates a loss of optical signal. Check the fiber optic cable connection to the SC/APC port. Ensure the cable is not damaged or bent sharply. Contact your ISP if the issue persists, as it may be a problem with their network or the fiber line.
- GPON Light Not Solid Green: The device is not successfully registered with the GPON network. Verify the fiber connection. Your ISP may need to provision the device.
- LAN Light Not On: Check the Ethernet cable connection between the TX-6610 and your connected device (computer/router). Try a different Ethernet cable or port on your connected device.
- İnternet erişimi yok: Even if all lights appear normal, there might be an issue with your ISP's service or your router's configuration. Restart the TX-6610 and your router. If the problem continues, contact your ISP.
- Device Unresponsive/Frozen: Use the RESET button to restore factory defaults (see Maintenance section).
Özellikler
Donanım Özellikleri
| Özellik | Tanım |
|---|---|
| Arayüz | 1x 10/100/1000Mbps RJ45 Port, 1x SC/APC Port |
| Düğmeler | 1x Power On/Off Button, 1x RESET Button |
| Harici Güç Kaynağı | 9VDC/0.6A |
| IEEE Standartları | IEEE 802.3, 802.3u, 802.1Q, 802.1p |
| Data Rate (Upstream) | 1.244Gbps |
| Data Rate (Downstream) | 2.488Gbps |
| Boyutlar (G x D x Y) | 4.0 x 1.5 x 4.2 inç (102.7 x 37.9 x 106.9 mm) |
| Maksimum Mesafe | 0 ~ 20 Km |
| GPON Standards | ITU-T G.984.1, G.984.2, G.984.3, G.984.4 |
| Optik Modül | Class C+, Receiver APD-TIA, DFB Laser Transmitter |
| Wavelength (Upstream) | 1310nm |
| Wavelength (Downstream) | 1490nm |
Yazılım Özellikleri
| Özellik | Tanım |
|---|---|
| Hizmet kalitesi | VLAN-based Flow-Rating, Service Scheduling Rules (SP/WRR), Upstream Priority Label (802.1D), Rate Limit, Traffic Formation, Congestion Control (Tail-Drop) |
| VLAN | 802.1Q VLAN'ı tag, Transparent/Translation/Trunk VLAN modes, Authentication by SN and Password, Auto Detection VLAN |
| Güvenlik | AES Encryption, Packet Filter by VLAN |
| Yönetmek | Web, OMCI, Telnet, Fixed-Management IP, Factory Default Reset (button/Web UI), Real-time Statistics, Optical Diagnostics |
| Gelişmiş Özellikler | Upstream/Downstream FEC, Dynamic Bandwidth Allocation (DBA) compatible with NSR/SR (up to 16 T-CONTs and 256 GEM Ports), Optical power detection, Dying Gasp, Terminal Silent mechanism, Energy saving 802.3az EEE |
| IGMP | IGMP v2/IGMP v3 Snooping/Proxy |
| Sertifikalar | CE, FCC, RoHS |
| Sistem Gereksinimleri | Microsoft Windows 98SE, NT, 2000, XP, Vista, 7, 8; MAC OS; NetWare; UNIX; Linux |
Çevresel Koşullar
| Durum | Menzil |
|---|---|
| Çalışma Sıcaklığı | 0°C ~ 40°C (32°F ~ 104°F) |
| Depolama Sıcaklığı | -40°C ~ 70°C (-40°F ~ 158°F) |
| Çalışma Nemi | %10 ~ %90 yoğuşmasız |
| Depolama Nemi | %5 ~ %90 yoğuşmasız |
Kullanıcı İpuçları
Based on general user experiences with similar GPON terminals:
- Always ensure the fiber optic cable is not bent or kinked, as this can severely degrade signal quality.
- If you experience intermittent connectivity, try restarting both the GPON terminal and any connected router or computer.
- For optimal performance, connect your primary router directly to the Gigabit Ethernet port of the TX-6610.
Garanti ve Destek
This TP-LINK product is covered by the manufacturer's warranty. Please refer to the warranty card included in your package or visit the official TP-LINK website for detailed warranty terms and conditions. For technical support, troubleshooting assistance, or service inquiries, please contact TP-LINK customer support or your Internet Service Provider (ISP).
