OONO F-1020 12V 10Amp Forward and Reverse Relay Module

1. Giriş

The OONO F-1020 is a versatile 12V 10Amp Forward and Reverse Relay Module designed for controlling the direction of motors and linear actuators. This module simplifies the process of reversing motion in various applications, providing a compact and efficient solution for your control needs.

This image shows the front of the OONO F-1020 module, clearly displaying the terminal labels for power input (V+, 0V), motor output (M1, M2), and control inputs (FWD, 0V, REV), along with the status indicator LED.

2. Temel Özellikler

• Reversing relay module capable of powering any reversing motor equipment.
• Supports both Momentary-action (Self-resetting) and Alternate-action (Self-holding) switches for flexible control.
• Compact plastic case with pre-wired connections for easy mounting and installation.
• Integrated Forward (Red) and Reverse (Green) status indicating LEDs for clear operational feedback.
• Designed for low power consumption when the control switch is not activated.

3. Özellikler

This diagram provides precise measurements of the module, including length, width, height, and mounting hole specifications, all in millimeters.

4. Paket İçeriği

• 1x OONO F-1020 12V 10Amp Forward and Reverse Relay Module

5. Kurulum ve Kablolama

Careful wiring is essential for proper and safe operation. Refer to the wiring diagrams below for connecting the module to your power source, motor, and control switches.

Terminal Açıklamaları:

• V+: Positive power input (10-15V DC)
• 0V (Power): Ground for power input
• M1, M2: Motor output terminals. Connect these to your motor.
• İleri: Forward control input. Connect to the forward switch.
• 0V (Control): Ground for control inputs.
• DEVİR: Reverse control input. Connect to the reverse switch.

This image illustrates two common wiring configurations: one for a momentary-action (self-resetting) switch and another for an alternate-action (self-holding) switch. Both diagrams show connections to a 12V battery and a DC motor.

Kablolama talimatları:

1. Güç Bağlantısı: Connect the positive terminal of your 10-15V DC power source (e.g., battery) to the V+ terminal on the module. Connect the negative terminal (ground) of your power source to the 0V (Power) terminal.
2. Motor Bağlantısı: Connect the two wires of your DC motor to the M1 Ve M2 terminals. The polarity here will determine the initial direction when activated.
3. Control Switch Connection (Momentary-action):
   • Connect one side of the Forward Switch (FWD SW) to the İleri Çekiş terminal. Connect the other side of the FWD SW to the positive power source (V+).
   • Connect one side of the Reverse Switch (REV SW) to the REV terminal. Connect the other side of the REV SW to the positive power source (V+).
4. Control Switch Connection (Alternate-action):
   • Connect one side of the FWD switch to the İleri Çekiş terminal. Connect the other side of the FWD switch to the positive power source (V+).
   • Connect one side of the REV switch to the REV terminal. Connect the other side of the REV switch to the positive power source (V+).
5. Kısa devreleri önlemek için tüm bağlantıların güvenli ve yalıtımlı olduğundan emin olun.

6. Operasyon

Once properly wired, the module controls the motor direction based on the activation of the FWD or REV control inputs.

• Forward Operation: When the FWD control input is activated (e.g., by pressing a momentary switch or toggling an alternate switch), the module will drive the motor in the forward direction. The red LED indicator on the module will illuminate.
• Ters İşlem: When the REV control input is activated, the module will drive the motor in the reverse direction. The green LED indicator on the module will illuminate.
• Motorun Durdurulması:
  • For momentary-action switches, releasing the switch will stop the motor.
  • For alternate-action switches, toggling the switch off will stop the motor.
• Simultaneous Activation: Avoid activating both FWD and REV inputs simultaneously, as this can lead to unpredictable behavior or damage to the module/motor.

7. Bakım

• Temizlik: Modülü temiz tutun ve tozdan ve kirden arındırın. Temizlik için yumuşak, kuru bir bez kullanın.
• Çevre: Operate the module within its specified temperature and humidity ranges. Avoid exposure to moisture, extreme temperatures, or corrosive environments.
• Bağlantılar: Periodically check all wiring connections to ensure they remain secure. Loose connections can lead to intermittent operation or damage.
• Denetleme: Inspect the module for any signs of physical damage or overheating.

8. Sorun Giderme

• Motor Hareket Etmiyor:
  • Check if the power supply is connected correctly and providing 10-15V DC.
  • Verify that the motor is properly connected to M1 and M2.
  • Ensure the control switches are wired correctly and functioning.
  • Check if the motor itself is operational.
• Incorrect Direction:
  • If the motor moves in the opposite direction to the activated control input, reverse the connections of the motor wires to M1 and M2.
• LED Indicators Not Lighting:
  • Modülün güç aldığından emin olun.
  • Check the control switch connections and functionality.
• Modül Aşırı Isınması:
  • Ensure the motor current does not exceed the module's 10 Amp derecelendirme.
  • Güç kaynağı hacminin doğru olduğundan emin oluntage is within the 10-15V DC range.

9. Kullanıcı İpuçları

This section is typically populated with helpful advice from user experiences or frequently asked questions. As no specific user reviews or Q&A were provided, general tips include:

• Always double-check your wiring before applying power to prevent damage.
• Consider using appropriate fuses for your power supply to protect the circuit.
• For outdoor or harsh environments, ensure the module is housed in a protective enclosure.

10. Garanti ve Destek

For any technical assistance, warranty claims, or further inquiries regarding the OONO F-1020 module, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.