WELLYE HY2005RX, HY2005M-HL, HY2005RX-HL, HY2025RX-SE-12V

Kullanım Kılavuzu

24V Bluetooth Remote Control and Receiver for Children's Electric Cars

Models: HY2005RX, HY2005M-HL, HY2005RX-HL, HY2025RX-SE-12V

giriiş

This manual provides essential information for the safe and effective use of your WELLYE 24V Bluetooth Remote Control and Receiver for children's electric ride-on cars. This product is designed as a replacement part for compatible electric vehicles. Please read these instructions carefully before installation and operation.

Üzerindeview of various WELLYE 24V remote controls and receiver units
Şekil 1: Üzeriview of WELLYE 24V Remote Controls and Receiver Units

Kurmak

1. Uyumluluk Kontrolü

Before proceeding with installation, ensure this control box is compatible with your child's electric ride-on car. Open your existing electric ride-on car and locate the control box. If the appearance and model number of this replacement control box match your original unit, it should be compatible.

Close-up of HY2005M-HL-24V receiver unit, noting 'No steering interface'
Figure 2: HY2005M-HL-24V Receiver (Note: No Steering Interface)
Close-up of HY2005RX-24V/40A receiver unit with motor and power supply connections
Figure 3: HY2005RX-24V/40A Receiver Unit
Close-up of HY2005RX-HL-24V receiver unit with motor and power supply connections
Figure 4: HY2005RX-HL-24V Receiver Unit

2. Alıcı Kurulumu

  1. Disconnect the vehicle's battery before beginning any installation.
  2. Carefully remove the old receiver unit from the electric car.
  3. Connect the new receiver unit to the vehicle's wiring harness. Ensure that the drive motors, steering motor (if applicable to your receiver model), and power supply are connected to the corresponding ports on the receiver. Refer to the labels on the receiver unit for correct connections (e.g., "Steering motor", "Drive motor", "Power Supply").
  4. Secure the new receiver unit in its designated location within the vehicle.

3. Uzaktan Kumanda Pilinin Kurulumu

  1. Uzaktan kumandanın arkasındaki pil bölmesini bulun.
  2. Using a screwdriver, loosen the screw to open the battery cover.
  3. Insert two AAA (1.5V) batteries, ensuring correct polarity (+/-).
  4. Pil kapağını yerine takın ve vidayı sıkın.
Diagram showing battery installation and button functions on the remote control
Figure 5: Remote Control Battery Installation and Button Layout

4. Pairing the Remote Control with the Receiver

To establish a connection between the remote control and the receiver:

  1. Ensure the electric car is turned OFF.
  2. Press and hold the 'Code' button on the remote control (refer to Figure 5 for location).
  3. While holding the 'Code' button, turn ON the electric car.
  4. Release the 'Code' button once the pairing is successful (e.g., indicated by a light on the receiver or remote, or the car responding to remote input).
  5. Test all functions to ensure proper pairing.

Kullanım Talimatları

The remote control allows you to operate the electric car wirelessly using 2.4G Bluetooth technology. Refer to Figure 5 for button identification.

  • Forward/Back Arrows: Control the forward and backward movement of the car.
  • Sol/Sağ Oklar: Control the steering of the car.
  • Speed Button (S): Adjust the speed settings (e.g., low, medium, high). The 'Speed indicator' lights may show the current speed level.
  • Stop Button (P): Immediately stop the car.
  • Code Button: Used for pairing the remote control with the receiver.
White remote control unit showing buttons for forward, back, speed, stop, left, right, and code
Figure 6: White Remote Control
Black remote control unit showing buttons for forward, back, speed, stop, left, right, and code
Figure 7: Black Remote Control

Bakım

  • Keep the remote control and receiver clean and dry. Avoid exposure to water or excessive moisture.
  • Regularly check the remote control batteries and replace them when power is low to ensure optimal performance.
  • Store the components in a cool, dry place when not in use.
  • Cihazları düşürmekten veya şiddetli darbelere maruz bırakmaktan kaçının.

Sorun giderme

SorunOlası NedenÇözüm
Araç uzaktan kumandaya yanıt vermiyor.Remote control batteries are low or dead.
Remote control is not paired with the receiver.
Receiver is not powered or faulty.
Uzaktan kumanda pillerini değiştirin.
Re-pair the remote control and receiver (see Setup section).
Check power connections to the receiver and ensure the car's main power is on.
Araç düzensiz veya aralıklı olarak hareket ediyor.Weak battery in remote control.
Diğer 2.4G cihazlardan kaynaklanan parazit.
Gevşek kablo bağlantıları.
Uzaktan kumanda pillerini değiştirin.
Kablosuz parazitin daha az olduğu bir alana geçin.
Check all wiring connections to the receiver and motors.
Steering does not work (for models with steering interface).Steering motor not connected or faulty.
Remote control not paired correctly.
Check steering motor connection to the receiver.
Uzaktan kumandayı yeniden eşleştirin.

Özellikler

ÖzellikŞartname
Tedarik HacmitageDoğru Akım 24V
Kontrol Yöntemi2.4G Bluetooth
Yük AkımıMaksimum 40A
Sıklık2.407GHz - 2.473GHz
MalzemePlastik (PP)
SertifikalarCE, FCC
Önerilen Yaş3-6Y, 6-12Y, 14+y
ElektrikliNo Battery (for receiver)
Piller DahilHayır (uzaktan kumanda için)

Kullanıcı İpuçları

  • Yedek parça: This product is a replacement remote control and receiver unit, not a standalone toy. It is intended to replace existing faulty units in compatible children's electric cars.
  • Model Matching: Always verify the model number on your original control box against the models listed for this product (HY2005RX, HY2005M-HL, HY2005RX-HL, HY2025RX-SE-12V) to ensure compatibility.
  • Steering Interface: Be aware that some receiver models, like the HY2005M-HL-24V, may not include a steering interface. Ensure the chosen model matches the functionality required by your vehicle.

Garanti ve Destek

For any issues, questions, or support regarding your WELLYE 24V Bluetooth Remote Control and Receiver, please contact the seller, WELLYE Children's Car Parts Store, directly through the platform where you made your purchase. Provide your order details and a clear description of the issue for prompt assistance.

İlgili Belgeler - HY2005RX, HY2005M-HL, HY2005RX-HL, HY2025RX-SE-12V

Önview HydroLogic StealthRO150 Kullanım Kılavuzu: Özelleştirilmiş Ters Ozmoz Filtresi
Bu kullanım kılavuzu, HydroLogic StealthRO150 Özelleştirilmiş Ters Ozmoz Filtresi için kurulum, filtre değişimi, bakım, sorun giderme ve teknik özellikleri kapsayan kapsamlı talimatlar sunmaktadır. Hidroponik ve bahçe uygulamaları için tasarlanan bu kılavuz, optimum su arıtımının nasıl sağlanacağını ayrıntılı olarak açıklamaktadır.
Önview Brother HL-L2400DW serijos spausdintuvų internetinis naudotojo vadovas
Išsamus internetinis naudotojo vadovas, skirtas Brother HL-L2400DW serijos spausdintuvams. Apima sąranką, naudojimą, trikčių šalinimą ir priežiūrą.
Önview Toner Kartuşu için Toner Bankası Talimatları
Toner Bankası toner kartuşları için kapsamlı talimatlar, saklama yönergeleri, uyumlu yazıcı modelleri ve kurulum için gerekli güvenlik adımları dahil.
Önview Brother DR-3400 Drum Ünitesi: Kurulum ve Sayaç Sıfırlama Kılavuzu
Brother DR-3400 drum ünitesinin kurulumu ve uyumlu Brother yazıcılar ve çok işlevli aygıtlarda sayacın sıfırlanması için adım adım talimatlar.
Önview Healthland Sauna Kullanım Kılavuzu: HL-100 ila HL-910 Modelleri
Healthland Sauna Equipment Co. Ltd. HL-100, HL-200, HL-300, HL-400, HL-500, HL-600, HL-700, HL-800, HL-900 ve HL-910 modelleri için kapsamlı kullanım kılavuzu. Kullanım talimatları, güvenlik uyarıları, teknik özellikler ve kontrol paneli kılavuzu içerir.
Önview Greitosios sąrankos vadovas Brother HL-L2400DW serija
Vadovas greitai sąrankai ir instaliacijai spausdintuvams Brother HL-L2400DW, HL-L2400DWE, HL-L2442DW, HL-L2445DW, HL-L2447DW, HL-L2460DN, HL-L2865DW. Apima išpakavimą, popieriaus įdėjimą, prijungimą ir tinklo sąranką.