Manufacturer of digital temperature controllers and electronic thermostats for refrigeration and industrial heating applications.
Honker is a manufacturer specializing in electronic control instruments, particularly digital temperature controllers for the refrigeration and heating industries.
The brand produces precise microcomputer-based thermostats, such as the EZ1X series, which are widely used in cold storage units, display cabinets, and industrial temperature management systems. Honker controllers typically feature dual-sensor inputs, compressor delay protection, defrost management, and alarm signaling for high or low temperature deviations.
En son kılavuzlar manuals+ Bu marka için derlendi.
Bu markanın kullanım kılavuzları, kaydı ve desteği hakkında sık sorulan sorular.
According to the EZ1X series manual, the default password to access manager parameters is 55.
The E1 error code indicates a cabinet probe fault. This typically means the NTC probe is disconnected, short-circuited, or the wrong type of probe is being used.
In power-on mode, press and hold the 'Set' key and the 'OK/Defrost' key simultaneously for 3 seconds to enter standby mode.
Press and release the 'Set' key to enter the adjustment interface, use the Up or Down keys to change the value, and press 'OK' to save the new setpoint.