FTVOGUE 12V Liquid Water Level Controller Module Instruction Manual

1. Giriş

This manual provides detailed instructions for the installation, operation, and maintenance of the FTVOGUE 12V Liquid Water Level Controller Module. This module is a PCB board detection sensor designed for automatic pump water level control, suitable for various applications including agricultural irrigation and home usage.

The FTVOGUE 12V Liquid Water Level Controller Module automates water level control for pumps, ensuring efficient management in agricultural and home environments. It utilizes advanced PCB technology for accurate liquid level sensing, minimizing overflow risks and maximizing resource efficiency. Its compact design allows for easy installation in various locations, accommodating both small and large water tanks.

2. Güvenlik Bilgileri

Lütfen bu cihazı kurmadan veya çalıştırmadan önce tüm güvenlik talimatlarını okuyun ve anlayın. Bu talimatlara uyulmaması elektrik çarpmasına, yangına veya ciddi yaralanmaya neden olabilir.

• Herhangi bir elektrik bağlantısı yapmadan önce güç kaynağının kesildiğinden emin olun.
• This module operates on 12V DC. Do not connect it to higher voltage AC power supplies directly.
• All wiring should be performed by a qualified individual or under the supervision of one.
• Keep the module away from moisture, extreme temperatures, and corrosive environments.
• Do not attempt to modify or repair the module. Contact support if issues arise.

3. Ürün Bileşenleri

Paket aşağıdaki ürünleri içermektedir:

• 1 x FTVOGUE 12V Liquid Water Level Controller Module

Şekil 3.1: Yukarıdan aşağıya view of the FTVOGUE 12V Liquid Water Level Controller Module, showing the relay, capacitor, resistors, LEDs, and terminal blocks.

4. Özellikler

5. Kurulum Talimatları

Follow these steps to properly install and connect your water level controller module.

1. Terminalleri Tanımlayın: Locate the power input terminals (9-12V), sensor input terminals (X, Z, S), and relay output terminals on the PCB. Refer to the image below for guidance.

Şekil 5.1: FTVOGUE 12V Liquid Water Level Controller Module showing the power input (9-12V), sensor input (X, Z, S), and relay output terminals.
2. Güç Bağlantısı: Connect a stable 12V DC power supply to the terminals labeled "9-12V". Ensure correct polarity (+ and -).
3. Sensör Bağlantısı:
   • Connect the common probe (ground) to the 'S' terminal.
   • Connect the low-level probe (to activate pump) to the 'Z' terminal.
   • Connect the high-level probe (to deactivate pump) to the 'X' terminal.
   • Position the probes in your water tank or reservoir at the desired low and high water levels.
4. Pump/Load Connection: Connect your pump or other load to the relay output terminals. The relay acts as a switch. Ensure the pump's power requirements do not exceed the relay's maximum contact current (10A).
5. Test: After all connections are secure, apply power to the module and test its functionality by manually simulating water level changes at the sensor probes.

6. Kullanım Talimatları

The FTVOGUE Water Level Controller Module operates automatically based on the water levels detected by the connected probes.

• When the water level drops below the 'Z' (low-level) probe, the module will activate the relay, turning on the connected pump to fill the tank.
• When the water level rises and reaches the 'X' (high-level) probe, the module will deactivate the relay, turning off the pump to prevent overflow.
• The 'S' (common) probe should always be submerged in the water to provide a reference point for the other probes.

Şekil 6.1: Açılı view of the FTVOGUE 12V Liquid Water Level Controller Module, highlighting the electronic components and relay.

7. Bakım

To ensure optimal performance and longevity of your water level controller module, follow these maintenance guidelines:

• Düzenli Muayene: Tüm elektrik bağlantılarını periyodik olarak sıkılık ve korozyon belirtileri açısından kontrol edin.
• Temizlik: Keep the module clean and free from dust, dirt, and moisture. Use a soft, dry cloth for cleaning.
• Prob Durumu: Check the water level probes for mineral buildup or damage. Clean or replace probes as necessary to ensure accurate detection.
• Çevresel Koşullar: Ensure the module is operating within its specified environmental conditions (temperature, humidity).

8. Sorun Giderme

If you encounter issues with your FTVOGUE Water Level Controller Module, refer to the following troubleshooting guide:

9. Garanti Bilgileri

This FTVOGUE product comes with a manufacturer warranty for 90 days from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, accident, modification, or unauthorized repair.

Garanti talepleri için lütfen satın alma belgenizi saklayın.

10. Destek

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact FTVOGUE customer support through the retailer where the product was purchased or refer to the manufacturer's official webiletişim bilgileri için site.

Daha fazla bilgi için şu adresi ziyaret edebilirsiniz: FTVOGUE Store.