SEEIRIR BT-8806 Digital Anemometer User Manual

giriiş

This manual provides comprehensive instructions for the safe and effective use of the SEEIRIR BT-8806 Digital Anemometer. This device is engineered for real-time measurement of wind speed, temperature, and air volume, delivering reliable data with rapid response.

It is suitable for a variety of applications, including air conditioning and ventilation system detection, outdoor sports wind speed monitoring, industrial safety inspections, and meteorological teaching experiments.

Güvenlik Bilgileri

• Cihazı çalıştırmadan önce bu kılavuzu dikkatlice okuyun.
• Do not attempt to disassemble or modify the anemometer. This may cause damage and void the warranty.
• Keep the device away from water and high humidity to prevent electrical shock or damage.
• Sadece belirtilen pil tipini kullanın ve kurulum sırasında doğru polariteye dikkat edin.
• Cihazı uzun süre aşırı sıcaklıklara veya doğrudan güneş ışığına maruz bırakmaktan kaçının.
• Çocukların erişemeyeceği yerde saklayınız.

Paket İçeriği

Aşağıda listelenen tüm öğelerin paketinizde mevcut olduğundan emin olun:

• BT-8806 Digital Anemometer
• Mini Compass
• Kordon
• Tornavida
• Kullanıcı Kılavuzu

Ürün Bittiview

Familiarize yourself with the components of your BT-8806 Digital Anemometer:

• Wind Cup Sensor: Located at the top, this rotating sensor measures wind speed.
• LCD Ekran: Shows real-time readings for wind speed, temperature, and other indicators.
• BİRİM Düğmesi: Changes wind speed measurement units.
• MAKS/DAK Düğmesi: Cycles through maximum, minimum, and average wind speed readings.
• Power / Backlight Button: Turns the device on/off and activates/deactivates the display backlight.
• °F/°C Düğmesi: Santigrat ve Fahrenheit sıcaklık birimleri arasında geçiş yapar.
• TUTMA Düğmesi: Freezes the current readings on the display.
• Pil Bölmesi: Pil takılması için arka tarafta yer almaktadır.
• Tripod Screw Mount: Located at the bottom for mounting on a tripod.

Kurmak

Pil Kurulumu

The BT-8806 Anemometer requires batteries for operation. To install:

1. Cihazın arkasındaki pil bölmesi kapağını bulun.
2. Use the included screwdriver to open the battery compartment.
3. Insert the required batteries (not included) according to the polarity markings (+/-) inside the compartment.
4. Pil bölmesi kapağını güvenli bir şekilde kapatın.

Kordon Takılması

Attach the included lanyard to the designated loop on the anemometer for secure handling and to prevent accidental drops.

Tripod Montajı

For stable, hands-free operation, the device features a standard tripod screw mount at its base. Attach it to a compatible tripod as needed.

Operasyon

Güç Açık/Kapalı

Basılı tutun Güç button (red circle with line) for approximately 2 seconds to turn the device on or off.

Arka Işık Kontrolü

Kısaca basın Güç button to activate or deactivate the display backlight for improved visibility in low-light conditions.

Wind Speed Measurement

Hold the anemometer so that the wind cup sensor at the top faces the airflow. The current wind speed will be displayed prominently on the LCD.

Changing Wind Speed Units

Basın BİRİM button to cycle through the available wind speed units: meters per second (m/s), kilometers per hour (km/h), miles per hour (mph), and Knots.

Sıcaklık Ölçümü

The current ambient temperature is displayed at the bottom section of the LCD simultaneously with wind speed readings.

Sıcaklık Birimlerini Değiştirme

Basın °F/°C Sıcaklık göstergesini Santigrat (°C) ve Fahrenheit (°F) arasında değiştirmek için kullanılan düğme.

MAX/MIN/AVG Function

Basın MAKSİMUM/MİNİMUM düğmeye bas view the maximum, minimum, and average wind speed readings recorded since the device was powered on or the function was reset. Press the button repeatedly to cycle through these modes.

Veri Bekletme İşlevi

Basın TUTMAK button to freeze the current readings on the display. This is useful for noting down measurements. Press the button again to release the hold and resume real-time measurements.

Bakım

Temizlik

Wipe the device exterior with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the device in water.

Depolamak

When not in use for extended periods, store the anemometer in a cool, dry place. Remove the batteries to prevent leakage and damage to the device.

Sorun giderme

• Cihaz açılmıyor: Pillerin doğru şekilde takıldığından emin olun. Pillerin doğru kutuplara takıldığından ve tamamen boşalmadığından emin olun. Gerekirse pilleri değiştirin.
• Inaccurate wind speed readings: Ensure the wind cup sensor is unobstructed and rotating freely. Avoid measuring in turbulent or obstructed airflow.
• Display is blank or shows erratic readings: Check battery level. If the issue persists after replacing batteries, contact customer support.
• Arka ışık çalışmıyor: Ensure the device is powered on. Briefly press the Power button to toggle the backlight.

Özellikler

• Modeli: BT-8806
• Ölçüm Birimleri: m/s, km/h, mph, Knots (for wind speed); °C, °F (for temperature)
• Temel Özellikler: Real-time wind speed and temperature measurement, MAX/MIN/AVG functions, Data Hold, Backlight, Tripod Screw Mount
• Güç Kaynağı: Piller (dahil değildir)
• Ürün Ağırlığı: 14.1 ons
• Üretici: SEEIRIR

Garanti ve Destek

For detailed warranty information, technical assistance, or customer support, please refer to the contact details provided with your original purchase documentation or visit the official SEEIRIR webalan.