AVAPOW TJ18 Jump Starter & AP18 Tire Inflator User Manual

1. Giriş

Thank you for choosing the AVAPOW TJ18 Jump Starter and AP18 Tire Inflator. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your devices. Please read this manual thoroughly before use and retain it for future reference.

2. Güvenlik Bilgileri

Always observe the following safety precautions to prevent injury or damage to the devices:

• Wear eye protection when operating the jump starter.
• Ensure adequate ventilation when charging or operating the devices.
• Keep the devices away from children and unauthorized personnel.
• Akü takviye cihazını kısa devre yaptırmayın.amps.
• Takviye cl'yi bağlayınamps to the correct battery terminals (red to positive, black to negative).
• Do not expose the devices to rain, moisture, or extreme temperatures.
• Cihazları sökmeye veya üzerinde değişiklik yapmaya çalışmayın.
• Avoid over-inflating tires; always refer to the vehicle manufacturer's recommended tire pressure.

3. Paket İçeriği

Paketinizde tüm öğelerin mevcut olduğundan emin olun:

• AVAPOW TJ18 Jump Starter
• AVAPOW AP18 Tire Inflator
• Smart Jump Cables
• USB-C Şarj Kablosu
• Air Hose with Screw Connector
• Çeşitli Meme Adaptörleri
• Depolama Çantası
• Kullanım Kılavuzu (bu belge)

4. Ürün Bittiview

4.1 AVAPOW TJ18 Jump Starter

This image displays the AVAPOW TJ18 Jump Starter alongside the AP18 Tire Inflator, showcasing their compact design and key features. The TJ18 Jump Starter features a robust casing, a clear digital display, multiple output ports, and a dedicated jump start port. The AP18 Tire Inflator is shown with its digital screen and air hose connection.

The TJ18 Jump Starter is equipped with a 4-inch digital LED screen that displays real-time battery level, voltage, and operational alerts. It includes a USB-C PD 18W input/output port, dual USB output ports for charging mobile devices, a 12V DC output port for powering accessories, a jump start port for connecting the smart jump cables, and an integrated LED flashlight.

5. Kurulum: Akü Takviye Cihazını Şarj Etme

Before initial use, fully charge the AVAPOW TJ18 Jump Starter. It is recommended to recharge the device after each use and every 3-6 months if stored, to maintain optimal battery health.

1. Connect the supplied USB-C charging cable to the USB-C PD port on the TJ18 Jump Starter.
2. USB-C kablosunun diğer ucunu uyumlu bir USB duvar adaptörüne (dahil değildir) veya bir araç şarj cihazına bağlayın.
3. The digital display will show the charging status and battery level. Charge until the display indicates 100% or 'FULL'.
4. Tam şarj genellikle yaklaşık 2.5 saat sürer.

6. Akü Takviye Cihazının Çalıştırılması

Use the TJ18 Jump Starter to start 12V vehicles with dead batteries.

6.1 Pre-Jump Check

• Akü takviye cihazının en az %50 şarjlı olduğundan emin olun.
• Turn off all vehicle accessories (lights, radio, AC).
• Place the vehicle in 'Park' (automatic) or 'Neutral' (manual) and engage the parking brake.

6.2 Connecting the Jump Cables

1. Insert the blue plug of the smart jump cables into the jump start port on the TJ18 Jump Starter. Ensure a firm connection.
2. Bağlan kırmızı (+) clamp Araç aküsünün pozitif (+) terminaline.
3. Bağlan siyah (-) clamp aracın aküsünün negatif (-) terminaline.
4. The smart cable indicator light will show the connection status. A solid green light indicates a correct connection.

6.3 Aracın Çalıştırılması

• Normal Mode (Low-Voltage Battery): If the smart cable indicator is solid green, proceed to start the vehicle.
• Force Start Mode (Completely Dead Battery): If the smart cable indicator does not turn solid green (e.g., flashes red/green or remains off), the battery may be completely dead. Press and hold the 'BOOST' button on the smart cable for 3 seconds until the indicator turns solid green. You have 30 seconds to start the vehicle.
• Start the vehicle's engine. If it doesn't start immediately, wait 30 seconds before attempting again. Do not crank for more than 3 seconds per attempt.

6.4 Disconnecting the Cables

1. Araç çalıştırıldıktan hemen sonra çıkarın. siyah (-) clamp from the vehicle's battery.
2. Then, remove the kırmızı (+) clamp from the vehicle's battery.
3. Disconnect the smart jump cables from the TJ18 Jump Starter.

6.5 Using the Flashlight and Power Bank Functions

• El feneri: Press and hold the power button on the TJ18 to turn on the LED flashlight. Press again to cycle through modes (solid, strobe, SOS). Press and hold to turn off.
• Taşınabilir şarj aleti: Connect your devices to the USB-A or USB-C output ports using appropriate cables to charge them. The 12V DC output can power compatible 12V accessories.

7. Operating the Tire Inflator

Use the AP18 Tire Inflator to inflate vehicle tires, bicycle tires, sports balls, and other inflatables.

1. Ensure the AP18 Tire Inflator is adequately charged.
2. Screw the air hose securely onto the air hose port of the AP18.
3. Attach the other end of the air hose to the tire valve stem. For other inflatables, use the appropriate nozzle adapter.
4. Turn on the AP18. The digital display will show the current tire pressure.
5. Use the '+' and '-' buttons to set the desired target pressure. The unit can be switched between PSI, BAR, KPA, and KG/CM² using the mode button.
6. Press the start button to begin inflation. The inflator will automatically stop once the preset pressure is reached.
7. Disconnect the air hose from the tire valve and then from the AP18.
8. The AP18 also features an LED light for use in dark conditions. Press the light button to activate.

8. Bakım

• Temizlik: Cihazları yumuşak, kuru bir bezle silin. Sert kimyasallar veya aşındırıcı temizleyiciler kullanmayın.
• Depolamak: Store the devices in a cool, dry place, away from direct sunlight and extreme temperatures. Keep them in the provided storage bag.
• Pil Bakım: For optimal battery life, fully charge the TJ18 Jump Starter every 3-6 months, even if not in use. Avoid completely draining the battery for extended periods.
• Inspect cables and hoses regularly for any signs of damage or wear. Replace if necessary.

9. Sorun Giderme

10. Özellikler

11. Garanti ve Destek

AVAPOW products are designed for reliability and performance. This product typically comes with a limited warranty covering manufacturing defects. For specific warranty terms, registration, or technical support, please visit the official AVAPOW website or contact our customer service team through the retailer where the product was purchased. Please have your model number (TJ18, AP18) and purchase information ready when contacting support.

Webalan: www.avapow.com (Conceptual link, please refer to actual product packaging for official webSite)