Andeman Ep155 & Ep177 Car Jump Starter with Air Compressor User Manual

1. Giriş

This manual provides essential information for the safe and effective operation of your Andeman Ep155 or Ep177 Car Jump Starter with Air Compressor. Please read this manual thoroughly before using the device and retain it for future reference. This device is designed to jump start 12V vehicles and, for the Ep177 model, also functions as a portable tire inflator and power bank.

2. Güvenlik Bilgileri

WARNING: Improper use can result in injury or damage to the device and vehicle. Always follow these safety guidelines.

Çocukların erişemeyeceği yerde saklayınız.
Cihazı suya daldırmayın.
Yanıcı sıvılar, gazlar veya tozların bulunduğu patlayıcı ortamlarda çalıştırmayın.
Kullanım sırasında uygun havalandırma sağlayın.
Do not disassemble the device. Contact qualified service personnel for repairs.
Avoid direct exposure to sunlight or high temperatures.
Yalnızca birlikte verilen akıllı klipsleri kullanın.amps ve aksesuarlar.
En iyi performansı elde etmek için kullanmadan önce cihazın tamamen şarj edildiğinden emin olun.
The device features 10 advanced safety protections, including Overload Protection, Sparks Protection, Reverse Charges Protection, Reverse Polarities Protection, Over Currents Protection, Low Temperature Protection, Over Charges Protection, and Short Circuits Protection.

Diagram illustrating 10 safety protections of the Andeman jump starter — Figure 2.1: The Andeman jump starter incorporates 10 safety protections for secure operation, including safeguards against overcharge, over-discharge, overcurrent, short circuit, overvoltage, reverse connection, over temperature, voltage regulation, reverse charge, and reverse polarity.

3. Ürün Bittiview ve Bileşenler

Your Andeman Car Jump Starter is a multi-functional device designed for emergency vehicle starting, and for the Ep177 model, also includes a portable air compressor and power bank capabilities.

Andeman jump starter with smart clamps and inflation nozzles — Figure 3.1: The Andeman jump starter unit shown with its smart battery clamps and various inflation nozzles for different applications.

Andeman jump starter demonstrating both jump start and tire inflation functions — Figure 3.2: This image highlights the dual functionality of the Ep177 model, serving as both a 4000A jump starter and a 150PSI tire inflator.

Paket İçeriği:

Andeman Car Jump Starter (Ep155 or Ep177)
Akıllı Pil Clamps
USB-C Şarj Kablosu
Inflation Nozzles (for Ep177 model)
Kullanıcı Kılavuzu

4. Özellikler

Özellik	Ep155 Model	Ep177 Model
Tepe Akımı	3000A	4000A
Pil Kapasitesi	20000mAh	24000mAh
Motor Uyumluluğu (Benzin)	9.0L'ye kadar	8.5L'ye kadar
Motor Uyumluluğu (Dizel)	7.0L'ye kadar	7.0L'ye kadar
Starts per Charge	80 kata kadar	70 kata kadar
Bekleme Süresi	24 ay	48 ay
Air Compressor (PSI)	Yok	Up to 150PSI
Şarj Girişi (Tip-C)	5V/3A, 9V/2A, 12V/1.5A
USB-A Çıkışı	QC3.0
USB-B Çıkışı	5V/3A
DC Çıkış	15V
Tam Şarj Süresi	Yaklaşık 1.8 saat
LED El Feneri	240 Lumens, 36 hours battery life

Andeman 4000A Jump Starter connected to a car battery in an engine bay — Figure 4.1: The Ep177 model, a 4000A jump starter, is suitable for various 12V vehicles, capable of starting 8.5L gas or 7L diesel engines.

5. Kurulum ve Şarj

5.1 İlk Ücretlendirme

Before first use, fully charge the jump starter. Connect the provided USB-C charging cable to the device's Type-C input port and a suitable USB power adapter (not included). The device supports bi-directional fast charging, achieving a full charge from 0% to 100% in approximately 1.8 hours.

Andeman jump starter being charged via Type-C cable in a car console — Figure 5.1: The jump starter can be fast-charged via its Type-C port, allowing for quick readiness. A 10-minute charge can provide enough power for a jump start.

5.2 Pil Seviyesini Kontrol Etme

The device features a digital display or indicator lights to show the current battery level. Ensure the device has sufficient charge before attempting to jump start a vehicle or inflate tires.

6. Kullanım Talimatları

6.1 Aracın Takviyeyle Çalıştırılması

Akü takviye cihazının en az %50 şarjlı olduğundan emin olun.
Aracın kontağını ve tüm aksesuarlarını kapatın.
Bağlan kırmızı (+) clamp aracın pozitif (+) akü terminaline.
Bağlan siyah (-) clamp to the vehicle's negative (-) battery terminal or a solid, unpainted metal part of the engine block.
Akıllı cl'yi takınamp connector into the jump starter's port. The indicator light on the smart clamp should turn green, indicating a correct connection. If it's red or flashing, check connections and battery voltage.
Start the vehicle. If it doesn't start immediately, wait 30 seconds before trying again. Do not crank for more than 3 seconds per attempt.
Araç çalıştırıldıktan hemen sonra akıllı bağlantıyı kesin.amp Akü takviye cihazından gelen bağlantı konektörü.
Siyah (-) işareti kaldırın.amp önce, sonra kırmızı (+) clamp araç aküsünden.

6.2 Using the Air Compressor (Ep177 Model Only)

The Ep177 model features a built-in air compressor capable of delivering up to 150PSI.

Connect the air hose to the tire valve stem. Ensure a secure connection to prevent air leakage.
Power on the jump starter. The current tire pressure will be displayed.
İstediğiniz basıncı ayarlamak için '+' ve '-' düğmelerini kullanın.
Press the inflation button to start the compressor. The compressor will automatically stop once the preset pressure is reached.
Hava hortumunu lastik valfinden ayırın.

Note: For continuous use, it is recommended to rest the compressor for 10 minutes after every 10 minutes of operation to prevent overheating. A full charge can inflate 195/60 R15 tires from 0 to full approximately 4-5 times.

Andeman jump starter with digital display showing tire pressure and inflation icons — Figure 6.1: The Ep177 model's digital display shows current pressure and allows setting target pressure for tire inflation. It can inflate various items including car, motorcycle, bicycle tires, and sports equipment.

6.3 Taşınabilir Şarj Cihazı Olarak Kullanımı

The jump starter can also function as a portable power bank to charge electronic devices.

Connect your device's charging cable to the appropriate output port on the jump starter (USB-A QC3.0, USB-B 5V/3A, or Type-C 5V/3A, 9V/2A, 12V/1.5A).
The device will automatically begin charging.
The DC15V output port can power compatible devices like tire inflators (if not using the built-in one) or car refrigerators.

Andeman jump starter charging multiple devices like a laptop, smartwatch, and smartphone — Figure 6.2: The 24000mAh capacity allows the jump starter to serve as a power bank, compatible with over 1000 devices, including laptops, smartwatches, and smartphones.

6.4 LED El Fenerinin Kullanımı

The built-in 240 lumens LED flashlight offers multiple modes for various situations.

Press the flashlight button once to turn on the steady light.
Press again for SOS mode (flashing slowly).
Press a third time for Strobe mode (flashing rapidly).
El fenerini kapatmak için dördüncü kez basın.

The flashlight provides up to 36 hours of battery life.

Andeman jump starter's LED flashlight illuminating various scenarios like camping, roadside emergency, power failure, and car repair — Figure 6.3: The 240 lumens LED flashlight provides illumination for outdoor camping, roadside emergencies, power failures, and car repair tasks.

7. Bakım

7.1 Şarj Etme

To maintain optimal battery health, recharge the jump starter every 3-6 months, even if not in use. This prevents deep discharge and extends battery life.

7.2 Depolama

Cihazı serin, kuru, doğrudan güneş ışığından ve aşırı sıcaklıklardan uzak bir yerde saklayın.
Keep the device and accessories in the provided carrying case to protect them from damage.

7.3 Temizlik

Cihazı yumuşak ve kuru bir bezle silin. Sert kimyasallar veya aşındırıcı temizleyiciler kullanmayın.

8. Sorun Giderme

8.1 Vehicle Does Not Start

Pil seviyesini kontrol edin: Akü takviye cihazının yeterli şarjı olduğundan emin olun.
Bağlantıları kontrol edin: Akıllı cihazın doğru çalıştığını doğrulayın.amps doğru akü terminallerine (kırmızı pozitife, siyah negatife) güvenli bir şekilde bağlanmıştır.
akıllı clamp gösterge: If the indicator is red or flashing, refer to the smart clamp's instructions for error codes.
Vehicle battery condition: If the vehicle battery is severely damaged or completely dead, the jump starter may not be able to start it.

8.2 Air Compressor Not Working (Ep177 Only)

Pil seviyesini kontrol edin: Akü takviye cihazının yeterli şarjı olduğundan emin olun.
Hortum bağlantısı: Verify the air hose is securely connected to both the device and the tire valve.
Aşırı Isınma: If the compressor has been running for an extended period, it may have overheated. Allow it to cool down for 10-15 minutes before attempting to use it again.

8.3 Cihaz Şarj Olmuyor

Kablo: Ensure the USB-C charging cable is not damaged and is properly connected.
Güç adaptörü: Verify the USB power adapter is functional and provides adequate power output.

9. Garanti ve Destek

Your Andeman jump starter is UL Certified, ensuring it meets stringent safety standards. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official Andeman webalan.

For further assistance, please contact Andeman customer support.