AGT INDUSTRIAL AGT-MX15-(B) Small Excavator Instruction Manual

1. Güvenlik Bilgileri

For safe operation of the AGT-MX15-(B) Small Excavator, please adhere to all safety guidelines. This equipment is intended for specific uses and requires careful handling.

• Always wear appropriate personal protective equipment (PPE), including hard hat, safety glasses, gloves, and steel-toed boots.
• Ensure the operating area is clear of personnel, obstacles, and overhead hazards before starting.
• Never operate the excavator under the influence of alcohol or drugs.
• Perform a pre-operation inspection to check for any damage, leaks, or loose components.
• Understand and follow all local safety regulations and site-specific rules.
• Do not exceed the maximum digging depth or lifting capacity.
• Secure the machine properly when transporting.

2. Ürün Bittiview

The AGT-MX15-(B) is a compact and powerful 1-ton mini excavator designed for various digging and earthmoving tasks. It features a 13.5HP engine and includes a non-hydraulic thumb for enhanced material handling capabilities.

Temel Özellikler ve Teknik Özellikler:

• Modeli: AGT-MX15-(B)
• Çalışma Ağırlığı: 0.9 Ton (approximately 2205 lbs)
• Net Horsepower (HP): 13.5 beygir
• Yer değiştirme: 420cc
• Max Digging Depth: 1,769 mm (70 inç)
• Max Digging Height: 2,583 mm (102 inç)
• Genel Yükseklik: 2,210 mm (91 inç)
• Genel Genişlik: 936 mm (43 inç)
• Blade Max Drop Depth: 146 mm (6 inç)
• Parça Genişliği: 180*72*37 (Width*Pitch Length*Links)
• Baş parmak: Non-hydraulic thumb included
• Model Yılı: 2024

Şekil 2.1: Yan view of the AGT-MX15-(B) Small Excavator, showing the main body, tracks, and boom assembly.

Figure 2.2: The AGT-MX15-(B) Small Excavator with its boom extended and the non-hydraulic thumb attachment visible on the bucket.

3. Kurulum ve Montaj

The AGT-MX15-(B) excavator typically arrives partially assembled. Follow these general steps for final setup:

1. Paketin açılması: Carefully remove the excavator from its packaging. Inspect for any shipping damage.
2. Sıvı Kontrolleri: Verify engine oil, hydraulic fluid, and fuel levels. Top up if necessary using recommended fluids.
3. Pil Bağlantısı: Connect the battery terminals, ensuring correct polarity.
4. Kontrole Alışma: Locate and understand the function of all control levers, pedals, and switches. Refer to the control diagram (if provided separately).
5. Eklenti Kurulumu: If any attachments (e.g., bucket, thumb) are not pre-installed, follow the specific instructions for secure mounting. Ensure all pins and safety clips are in place.
6. Safety Guard Installation: Install any removable safety guards or covers as instructed.

A tool box is included with the product for basic maintenance and assembly needs.

4. Kullanım Talimatları

Before operating, ensure you have read and understood the safety information. Always operate the excavator from the operator's seat.

4.1 Motorun Çalıştırılması

1. Ensure the parking brake is engaged and all controls are in the neutral position.
2. Kontak anahtarını 'AÇIK' konumuna çevirin.
3. If equipped, engage the choke for cold starts.
4. Turn the ignition key to the 'START' position and release once the engine starts. Do not crank for more than 5 seconds.
5. Allow the engine to warm up for a few minutes before beginning operation.

4.2 Temel İşlemler

• Sürüş: Use the track control levers/pedals to move the excavator forward, backward, and to turn.
• Boom and Arm: Use the joystick controls to raise/lower the boom and extend/retract the arm.
• Kova: Use the joystick controls to curl in or dump the bucket.
• Salıncak: Use the swing control to rotate the upper structure of the excavator.
• Bıçak: Use the blade control lever to raise or lower the dozer blade.
• Baş parmak: The non-hydraulic thumb is manually adjustable or fixed, used in conjunction with the bucket for gripping materials.

4.3 Kapatma

1. Ekskavatörü düz bir zemine park edin.
2. Lower all attachments to the ground.
3. Park frenini çekin.
4. Motorun soğuması için birkaç dakika rölantide çalışmasına izin verin.
5. Kontak anahtarını 'KAPALI' konumuna çevirin.
6. Yetkisiz kullanımı önlemek için anahtarı çıkarın.

5. Bakım

Regular maintenance is crucial for the longevity and safe operation of your AGT-MX15-(B) excavator.

• Günlük Kontroller: Inspect fluid levels (engine oil, hydraulic fluid, coolant), check for leaks, inspect tracks for damage, and ensure all safety devices are functional.
• Motor Bakımı: Follow the engine manufacturer's recommendations for oil changes, air filter cleaning/replacement, and spark plug inspection.
• Hidrolik Sistem: Check hydraulic fluid level regularly. Replace hydraulic filters as per schedule.
• Yeşilasing: Lubricate all grease points on the boom, arm, bucket, and swing bearing daily or before each use.
• Ray Gerilimi: Periodically check and adjust track tension to prevent premature wear.
• Temizlik: Keep the excavator clean, especially around the engine and hydraulic components, to prevent overheating and contamination.
• Depolamak: When storing for extended periods, ensure the excavator is clean, all fluids are at correct levels, and the battery is disconnected or maintained.

6. Sorun Giderme

Bu bölüm, sık karşılaşılan operasyonel sorunlara çözümler sunmaktadır. Daha karmaşık sorunlar için yetkili servis personeliyle iletişime geçin.

• Motor Çalışmıyor:
  • Yakıt seviyesini kontrol edin.
  • Pil bağlantılarının sağlam olduğundan ve pilin şarjlı olduğundan emin olun.
  • Verify ignition switch is functioning.
  • Bujide kirlenme veya hasar olup olmadığını kontrol edin.
• Loss of Hydraulic Power:
  • Hidrolik sıvı seviyesini kontrol edin.
  • Inspect for hydraulic leaks.
  • Ensure hydraulic filters are not clogged.
• Motorun aşırı ısınması:
  • Soğutma sıvısı seviyesini kontrol edin.
  • Clean radiator fins and engine cooling areas.
  • Uygun havalandırmayı sağlayın.
• Alışılmadık Sesler:
  • Identify the source of the noise.
  • Check for loose components, worn bearings, or insufficient lubrication.

7. Ayrıntılı Özellikler

8. Garanti ve Destek

For information regarding warranty coverage, technical support, or to order replacement parts, please contact AGT INDUSTRIAL customer service. Refer to your purchase documentation for specific warranty terms and contact details.

Always provide your model number (AGT-MX15-(B)) and serial number when contacting support to ensure efficient service.