1. Giriş
The VTOMAN V10 Pro 4500A Jump Starter is a powerful and versatile device designed to provide reliable jump-starting for a wide range of 12V vehicles, including all gasoline and up to 10.0L diesel engines. Beyond its primary function, it also serves as a portable power bank for charging electronic devices and features a multi-mode LED flashlight for emergencies. This manual provides essential information for safe and effective use of your V10 Pro Jump Starter.

Figure 1: VTOMAN V10 Pro 4500A Jump Starter
2. Kutuda Neler Var?
Tüm ürünleri dikkatlice paketinden çıkarın ve aşağıdaki bileşenleri aldığınızdan emin olun:
- 1 x V10 Pro Jump Starter Unit
- 1 x Smart Jumper Cable with Indicator
- 1 x USB-A - Type-C Kablosu
- 1 x Type-C - Type-C Kablosu
- 1 Depolama Kılıfı x
- 1 x Kullanım Kılavuzu

Şekil 2: Paket İçeriği
3. Ürün Özellikleri
- High Starting Power: Genuine 4500 Amps peak current, capable of jump starting all 12V gasoline engines and up to 10.0L diesel engines.
- Versatile Power Bank: Equipped with USB-C/PD15W, dual USB-A/Quick Charging outputs, and 15V/10A DC output for charging various electronic devices and powering car accessories.
- Gelişmiş Güvenlik: Features 10 advanced safety technologies including spark-proof, reverse-charge, over-current, over-charge, reverse-polarity, high-temp, low-temp, short-circuit, over-voltage ve aşırı yük koruması.
- Aşırı Hava Koşullarında Operasyon: Designed to operate effectively in temperatures ranging from -4°F to 140°F (-20°C to 60°C).
- Uzun bekleme süresi: Automatically powers down after 10 seconds of inactivity, preserving power for up to 24 months on a single charge.
- Entegre LED El Feneri: 400 lumen LED light with 3 modes: Normal, Strobe, and SOS for emergency signaling.
- Taşınabilir Tasarım: Compact and comes with a sturdy storage case for easy transport and storage.

Figure 3: Wide Vehicle Compatibility
4. Kurulum
4.1 Atlama Marşının Şarj Edilmesi
Before first use, fully charge the VTOMAN V10 Pro. It can be charged using the provided USB-C cable via a wall charger (not included) or in your car. A full charge typically takes about 5 hours.
- Connect the Type-C cable to the IN/OUT (5V/3A 15W) port on the jump starter.
- Connect the other end of the cable to a USB wall adapter or a car charger.
- The battery indicator lights will illuminate to show the charging progress. All four lights indicate a full charge.

Figure 4: Charging at Home

Figure 5: Charging in Car
5. Kullanım Talimatları
5.1 Aracın Takviyeyle Çalıştırılması
Araç çalıştırma işlemine başlamadan önce akü takviye cihazının tamamen şarj olduğundan emin olun.
- Connect Smart Jumper Cable: Insert the blue end of the smart jumper cable into the jump start socket on the V10 Pro.
- Araç aküsüne bağlayın: kırmızı cl'yi takınamp araç aküsünün pozitif (+) terminaline ve siyah cl'yeamp negatif (-) terminale.
- LED Göstergesini Kontrol Edin: Observe the LED indicator on the smart jumper cable:
- Sürekli Yeşil LED: Connection is correct. Proceed to start the vehicle.
- Kırmızı LED: Reverse connection. Correct the polarity of the battery clamps.
- Yanıp Sönen Yeşil LED: Araç aküsü hacmitage is too low. Press the "BOOST" button on the smart cable. Once the Green LED illuminates solid, start the vehicle within 30 seconds.
- Işık Yok: Vehicle battery may be damaged. First, ensure correct connection. Try pressing the "BOOST" button. If Green LED illuminates solid, start the vehicle within 30 seconds.
- Aracı Başlat: Once the LED is solid green, start your vehicle.
- Bağlantıyı kes: After the vehicle starts, disconnect the smart jumper cable from the vehicle battery first, then from the jump starter.

Figure 6: Regular Jump Start Mode

Figure 7: Boost Mode for Totally Dead Batteries
5.2 Taşınabilir Şarj Cihazı Olarak Kullanımı
V10 Pro çeşitli elektronik cihazları şarj edebilir:
- Connect your device's charging cable to one of the USB-A (Quick Charging or 5V/2.4A) outputs or the USB-C (IN/OUT 5V/3A 15W) port.
- For 15V/10A DC output, use a compatible cable to power car refrigerators, air compressors, etc.

Şekil 8: Birden Fazla Cihazın Şarj Edilmesi
5.3 LED El Fenerinin Kullanımı
The built-in 400 lumen LED flashlight has three modes:
- Normal: Açmak için güç düğmesini 3 saniye basılı tutun.
- Strobe: Press the power button once more to activate strobe mode.
- S.O.S: Press the power button again to activate SOS signaling mode.
- To turn off, press the power button one more time or hold it for 3 seconds.

Şekil 9: LED El Feneri Modları
6. Güvenlik Bilgileri
The VTOMAN V10 Pro incorporates 10 advanced safety technologies to ensure user protection and prevent damage to the device or vehicle:
- Kıvılcım Geçirmez Koruma: Bağlantı sırasında kıvılcım oluşmasını önler.
- Ters Şarj Koruması: Akımın akü takviye cihazına geri akmasını önler.
- Aşırı Akım Koruması: Aşırı akım akışına karşı koruma önlemleri.
- Aşırı Şarj Koruması: Pil aşırı şarj olmasını önler.
- Ters Kutup Koruması: Yanlış sınıflandırmaya karşı uyarı verir ve koruma sağlar.amp Bağlantılar.
- Yüksek Sıcaklık Koruması: İç sıcaklık güvenli sınırları aşarsa otomatik olarak kapanır.
- Düşük Sıcaklık Koruması: Soğuk koşullarda güvenli çalışmayı sağlar.
- Kısa devre koruması: Kısa devrelerden kaynaklanan hasarları önler.
- Aşırı Hacimtage Koruma: Aşırı hacim artışına karşı koruma sağlar.tage.
- Aşırı yükleme koruması: Çok fazla güç çekilmesinden kaynaklanan hasarı önler.

Figure 10: Advanced Safety Technologies
7. Bakım
To ensure the longevity and optimal performance of your VTOMAN V10 Pro Jump Starter:
- Store the unit in its provided storage case when not in use.
- Recharge the unit periodically, even if not used, to maintain battery health. The unit has a 24-month long standby time, but regular checks are recommended.
- Keep the unit clean and dry. Avoid exposure to extreme moisture or direct sunlight for prolonged periods.

Figure 11: 24-Month Standby Time
8. Sorun Giderme
Refer to the LED indicator on the smart jumper cable for common issues:
| LED Göstergesi | Operasyon |
|---|---|
| Yeşil LED (sabit) | Bağlantı doğruysa aracı doğrudan çalıştırabilirsiniz. |
| Kırmızı LED | Ters bağlantı, lütfen pilin kutuplarını düzeltin clamps. |
| Yeşil LED (yanıp sönüyor) | Araç aküsü hacmitage is too low. Try to press "BOOST" button. When Green LED illuminates (solid), then start the vehicle within 30s. |
| Işık Yok | The vehicle battery may be damaged. First of all, make sure the correct connection. Try to press "BOOST" button. When Green LED illuminates (solid), then start the vehicle within 30s. |
9. Özellikler
| Özellik | Şartname |
|---|---|
| Model Numarası | JS-391 |
| Tepe Çıkış Akımı | 4500 Amps |
| Pil Hücresi Kompozisyonu | Lityum Polimer |
| Cilttage | 12 Volt |
| Ürün Boyutları | 1.3"D x 2.6"G x 8.8"Y |
| Ürün Ağırlığı | 0.45 Kilogram (15.8 ons) |
| USB-C Giriş/Çıkış | 5V/3A 15W |
| USB-A Çıkışı 1 | 5V/2.4A |
| USB-A Output 2 (Quick Charge) | 5V/9V/12V |
| DC Çıkış | 15V/10A |
| El feneri | LED (3 modes: Solid, Strobe, SOS) |
| Çalışma Sıcaklığı | -4°F ila 140°F (-20°C ila 60°C) |
10. Garanti ve Destek
The VTOMAN V10 Pro Jump Starter comes with an 18-month warranty and lifetime technical support. For any questions or assistance, please contact our dedicated customer service team.
İletişim Bilgileri:
- E-posta: support@vtoman.com
Additional support resources may be available on the official VTOMAN webalan.
Resmi Ürün Videoları
VTOMAN V10 Pro 4500A Portable Jump Starter Overview
Bu videoview of the VTOMAN V10 Pro 4500A Portable Jump Starter, demonstrating its features and capabilities.
Most Powerful Jump Starter & Battery Bank - VTOMAN V10 Pro
This video highlights the VTOMAN V10 Pro as a powerful jump starter and versatile battery bank.







