1. Giriş
The GROWNEER AX254301 Bathroom Fan with Light Combo is designed to provide efficient ventilation, rapid heating, and customizable lighting for your bathroom. This unit features a powerful 150 CFM fan, a 550W infrared heater, and a 1000lm LED light with three adjustable color temperatures (3000K/4000K/5000K). Its quiet operation ensures a comfortable environment while effectively managing humidity and temperature.
- Verimli Hava Akışı: 150 CFM fan suitable for rooms up to 80 square feet.
- Hızlı Isıtma: Two 550W infrared heating bulbs with overheat protection.
- Ayarlanabilir Aydınlatma: 1000lm LED light with selectable 3000K, 4000K, or 5000K color temperature.
- Sessiz Çalışma: Operates at a low 1.5 Sone noise level.
2. Önemli Güvenlik Bilgileri
Please read and understand all instructions before beginning installation. Failure to follow these instructions may result in electric shock, fire, property damage, or personal injury.
- Always disconnect power at the circuit breaker before installing or servicing the unit.
- All wiring must be performed by a qualified electrician in accordance with all applicable electrical codes and standards.
- Ünitenin uygun şekilde topraklandığından emin olun.
- Do not install this unit in a ceiling with less than 2x6 construction.
- Do not use this fan in cooking areas.
- The heater function has built-in overheat protection; it will automatically stop if temperatures become too high.
3. Kutuda Neler Var?
Kurulumdan önce tüm parçaların eksiksiz ve hasarsız olduğundan emin olun.

Figure 3.1: Package contents including the fan unit, mounting bracket, duct connector, clamps, gloves, and instruction manual.
- Bathroom Fan Unit with Heater and Light
- Montaj Braketi
- Duct Connector (4.5-inch compatible)
- Hortum Clamp(2) saniye
- Koruyucu Eldivenler
- Kesim Şablonu
- Kullanım Kılavuzu
4. Özellikler
| Özellik | Şartname |
|---|---|
| Marka | YETİŞTİRİCİ |
| Model Adı | AX254301 |
| Ürün Boyutları | 18.9"D x 11.42"G x 8.66"Y |
| Ceiling Opening Requirements | 17.13" x 11.02" |
| Hava Akış Kapasitesi | Dakikada 150 Feet Kübik (CFM) |
| Gürültü Seviyesi | 1.5 Sonlar |
| Isıtıcı Wattage | 550W (Infrared Two-Bulb) |
| Işık Çıkışı | 1000lm |
| Renk Sıcaklığı | 3000K/4000K/5000K (Adjustable) |
| Fan Vattage | 30 watt |
| Cilttage | 120 Volt |
| Kurulum Türü | Tavan Montajı |
| Oda Tipi | Banyo |
5. Kurulum ve Yükleme
Başlamadan önce: Ensure power is disconnected at the circuit breaker. Wear protective gloves provided.
5.1 Üniteyi Hazırlayın
- Remove Duct Connector and Wire Cover: Locate the duct connector and wire cover on the fan housing. Unscrew and remove them to access the internal wiring.
- Erişim Kablolaması: The heating element, exhaust fan, and light have separate wiring connections. Familiarize yourself with the wiring diagram in the manual.
5.2 Mounting the Housing
- Tavan Açıklığını Hazırlayın: Use the provided cut-out template to mark and cut the ceiling opening (17.13" x 11.02"). Ensure the opening is clear of obstructions and suitable for 2x6 ceiling construction.
- Montaj Braketini Kurun: Secure the mounting bracket to the ceiling joists using appropriate screws. The bracket is designed for secure installation.
- Place Fan Housing: Carefully insert the fan housing into the ceiling opening, ensuring it aligns with the mounting bracket.
- Güvenli Konut: Adjust the tabs on the fan housing to a vertical position and align them with the slots on the telescopic bracket. Bend the tabs to the side to firmly secure the housing.
5.3 Elektrik Bağlantıları
- Kabloları Bağlayın: Connect the house wiring to the fan's wiring. The black wire is for the exhaust fan, the blue wire is for the light (white receptacle), and the red wire is for the heater. Ensure all connections are secure and follow local electrical codes.
- Reattach Wire Cover: Once wiring is complete, reattach the wire cover with the short screw.
5.4 Kanalizasyon
- Connect Ventilation Duct: Attach a 4.5-inch ventilation duct (not included) to the duct connector on the fan housing. Secure it with the provided hose clamps and HVAC tape to ensure an airtight seal.
- Route Duct: Route the ventilation duct to an appropriate exterior vent. An insulated duct is recommended to prevent condensation.
5.5 Nihai Montaj
- Connect LED Wires: Connect the LED and Bluetooth wires from the panel to the corresponding plugs in the fan housing.
- Install Light Panel: Squeeze both sides of the panel spring and insert it into the spring rails in the fan housing. Push the panel up until it sits flush with the ceiling.
Video 5.1: Official GROWNEER Installation Guide. This video demonstrates the step-by-step process for installing the bathroom exhaust fan, including wiring and mounting.
Video 5.2: GROWNEER Bathroom Exhaust Fan Installation. This video provides a visual guide to the installation process, focusing on key steps like wiring and duct connection.
Video 5.3: Bathroom Exhaust Fan with Humidity Installation. This video provides a visual guide to the installation process, focusing on key steps like wiring and duct connection.
6. Kullanım Talimatları
The GROWNEER AX254301 offers independent control over its fan, heater, and light functions, allowing for customized comfort.
6.1 Fanın Çalıştırılması
- The 150 CFM fan can be operated independently to provide efficient ventilation for rooms up to 80 square feet.
- It operates at a quiet 1.5 Sone, ensuring minimal disturbance.

Figure 6.1: Illustration of the 150 CFM powerful airflow, ideal for rooms up to 80 sq. ft.

Figure 6.2: Visual representation of the 1.5 Sone ultra-quiet operation, showing noise levels compared to typical bathroom fans.
6.2 Isıtıcı Çalışması
- The two infrared heating bulbs deliver a total of 550W, providing rapid heat.
- The heater function can be activated independently for quick warmth in cold mornings.
- Built-in overheat protection automatically stops the heater if temperatures become too high.

Figure 6.3: Diagram illustrating the 550W powerful heater instantly warming the bathroom, with a temperature rise graph.
6.3 Hafif Çalışma
- The 1000lm LED light offers three adjustable color temperatures: 3000K (warm white), 4000K (neutral white), and 5000K (cool white).
- To adjust the color temperature, select the desired setting behind the light bulb.

Figure 6.4: Visual guide to selecting the 3 color temperatures (3000K, 4000K, 5000K) by adjusting a switch behind the light bulb.
7. Bakım
Regular maintenance ensures optimal performance and longevity of your GROWNEER bathroom fan.
- Izgaranın Temizlenmesi: Periodically wipe the exterior grille with a soft, damp bezle silin. Aşındırıcı temizleyiciler kullanmayın.
- Fan Kanatlarının Temizlenmesi: Disconnect power before attempting to clean fan blades. Remove the light panel and carefully clean any dust or debris from the fan blades.
- Ampul Değişimi: Ensure power is off before replacing heating bulbs. Use only bulbs of the correct wattage and type as specified in the manual.
8. Sorun Giderme
Fanınızla ilgili sorunlarla karşılaşırsanız, aşağıdaki yaygın sorunlara ve çözümlere bakın:
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Fan çalışmıyor | No power, loose wiring, motor issue | Check circuit breaker, verify wiring connections, contact support if motor is faulty. |
| Isıtıcı çalışmıyor | Overheat protection activated, faulty bulb, wiring issue | Allow unit to cool, check/replace heating bulbs, verify wiring. |
| Işık yanmıyor | Faulty LED, wiring issue, incorrect color temperature setting | Check LED connection, verify wiring, ensure color temperature switch is set correctly. |
| Aşırı gürültü | Loose fan blades, debris in fan, improper installation | Disconnect power, check for obstructions, ensure fan is securely mounted. |
9. Garanti ve Destek
For warranty information or technical support, please contact GROWNEER customer service. Refer to your purchase documentation for specific warranty terms.
Temas etmek: Please refer to the contact information provided in your product packaging or on the official GROWNEER webalan.