Jonsbo N10 Mini-ITX PC Case User Manual

1. Giriş

The Jonsbo N10 Mini-ITX PC Case is designed for users seeking a compact, functional, and elegantly designed enclosure for minimalist PC systems. It is suitable for space-saving office PCs, quiet HTPCs (Home Theater Personal Computers), or compact NAS (Network Attached Storage) systems. This manual provides essential information for the proper assembly, operation, and maintenance of your Jonsbo N10 case.

Figure 1: Jonsbo N10 Mini-ITX PC Case in a typical desktop setup.

2. Güvenlik Bilgileri

• Herhangi bir bileşeni takmadan veya çıkarmadan önce daima güç kaynağını duvar prizinden çıkarın.
• Statik elektrikten kaynaklanan hasarı önlemek için tüm parçaları dikkatlice tutun. Antistatik bileklik kullanmayı düşünün.
• Küçük parçaları ve vidaları çocuklardan uzak tutun.
• Aşırı ısınmayı önlemek için kasanın etrafında yeterli havalandırma olduğundan emin olun.
• Do not attempt to modify the case or its components, as this may void your warranty and pose safety risks.

3. Paket İçeriği

Lütfen paketinizde aşağıdaki tüm öğelerin bulunduğundan emin olun:

• Jonsbo N10 Mini-ITX PC Case
• 2 x Pre-installed Cooling Fans
• Accessory box with screws and mounting hardware

Şekil 2: Patlatılmış view showing the main components of the Jonsbo N10 case.

4. Kurulum ve Kurulum

4.1 Bileşen Bittiview

The Jonsbo N10 case is designed for Mini-ITX motherboards and compact components. Familiarize yourself with the internal layout before beginning assembly.

Şekil 3: Dahili view of the Jonsbo N10 case, illustrating component placement.

4.2 Anakart Kurulumu

1. Remove the side panels of the case.
2. Install your Mini-ITX motherboard into the designated area. Ensure the I/O shield is properly seated.
3. Anakartı verilen vidalarla sabitleyin.
4. Install your CPU and CPU cooler. Note that the maximum CPU cooler height supported is 38 mm. This case is optimized for CPUs with integrated graphics (iGPU) and does not support dedicated graphics cards.

4.3 Depolama Kurulumu

The Jonsbo N10 supports up to four 2.5-inch SSDs or HDDs.

1. Locate the 2.5-inch drive bays. These are typically found on a removable bracket or directly on the chassis.
2. Mount your 2.5-inch SSDs or HDDs onto the bracket using the provided screws.
3. Secure the bracket back into the case.

Figure 4: Installation process for 2.5-inch storage drives.

4.4 Güç Kaynağı Kurulumu

The case supports 1U-Flex power supplies up to 150 mm in length.

1. Identify the power supply mounting area, typically at the bottom of the case.
2. Slide the 1U-Flex power supply into its designated slot.
3. Güç kaynağını kasanın arka tarafındaki vidalarla sabitleyin.
4. Connect the necessary power cables to your motherboard and storage devices.

Figure 5: Power supply unit installation guide.

4.5 Fan Bağlantıları

The Jonsbo N10 comes with two pre-installed cooling fans. Connect their power cables to the appropriate fan headers on your motherboard.

4.6 Kablo Yönetimi

Due to the compact nature of the case, careful cable management is crucial for optimal airflow and aesthetics. Route cables neatly using zip ties or Velcro straps where possible.

5. Kullanım Talimatları

Tüm bileşenler takılıp sabitlendikten ve tüm kablolar bağlandıktan sonra:

1. Replace the side panels and secure them.
2. Monitörünüzü, klavyenizi, farenizi ve diğer çevre birimlerinizi bağlayın.
3. Connect the power cable to the power supply and then to a wall outlet.
4. Press the power button on the front of the case to start your system.

Şekil 6: Üst view of the Jonsbo N10, highlighting the power button and front panel.

6. Bakım

• Temizlik: Regularly clean the exterior of the case with a soft, dry cloth. For dust accumulation inside, use compressed air to gently clear vents and components. Ensure the system is powered off and unplugged before cleaning.
• Fan Kontrolü: Periodically check the pre-installed fans for dust buildup or unusual noises. Clean them as needed to maintain optimal airflow.
• Havalandırma: Ensure that the case's ventilation holes are not obstructed to allow for proper heat dissipation.

7. Sorun Giderme

• Sistem açılmıyor: Double-check all power connections, including the power supply to the wall, the motherboard 24-pin connector, and the CPU power connector. Ensure the power button cable is correctly connected to the motherboard.
• Aşırı fan gürültüsü: While the case includes pre-installed fans, some users may find them audible. If fan noise is a concern, consider replacing the pre-installed fans with quieter aftermarket alternatives (e.g., Noctua fans). Ensure fans are free of dust and properly secured.
• Aşırı Isınma: Verify that all fans are spinning correctly and that the case's ventilation is unobstructed. Ensure your CPU cooler is properly seated and making good contact with the CPU.
• USB bağlantı noktaları çalışmıyor: Check the internal USB 3.0 header connection from the front panel to the motherboard.

8. Özellikler

9. Garanti ve Destek

The Jonsbo N10 PC Case comes with a 2 yıl ürün garantisi. For technical support, warranty claims, or further assistance, please contact your retailer or visit the official Jonsbo webLütfen garanti işlemleri için satın alma belgenizi saklayın.