Brightever SLL-DIY-RGBW6225

Brightever Permanent Outdoor Lights (62FT Smart RGBIC) User Manual

Model: SLL-DIY-RGBW6225

giriiş

This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your Brightever Permanent Outdoor Lights. Please read this manual thoroughly before use to ensure proper functionality and safety.

Paket İçeriği

  • RGBW Permanent outdoor string with 25 lights (x1)
  • Adapter with control box (x1)
  • Cable clips and screw pack (x1)
  • Kullanım kılavuzu (x1)
  • Remote control (x1) (battery included)

Güvenlik Bilgileri

  • Güç adaptörünün uygun bir elektrik prizine bağlı olduğundan emin olun.
  • Do not cut the string light. This will damage the product and void any warranty.
  • Keep the control box and power adapter away from excessive moisture or direct water exposure beyond the IP65 rating.
  • -4°F ile 140°F (-15°C ile 60°C) arasında belirtilen sıcaklık aralığında çalıştırın.
  • Use only the provided adapter.
  • The product operates on a safe 30V low voltage.

Kurulum ve Yükleme

The Brightever Permanent Outdoor Lights are designed for straightforward installation. Follow these steps for optimal placement and secure attachment.

1. Planning Placement

Determine the desired location for your lights, typically along eaves or other outdoor structures. The total length of the light string is 62 feet, with 25 individual lights. Ensure the power adapter can reach a suitable outdoor power source.

Diagram showing product dimensions and recommended house size for 62ft lights

Image: Product dimensions indicating 62ft total length with 25 lights.

2. Attaching the Lights

Each light is equipped with pre-assembled high-strength adhesive tape. For enhanced security and long-term stability, use the provided upgraded cable screw clips. These clips are designed to withstand pulling forces up to 15lb.

  1. Clean the surface where the lights will be attached to ensure optimal adhesion.
  2. Peel the backing from the adhesive tape on each light and firmly press it onto the desired surface.
  3. For permanent installation, use the provided screw clips. Manually screw the clips into place over the light string at regular intervals or wherever additional support is needed.
  4. The lights are compatible with various eave materials including wood, fiber, cement, metal, or vinyl.
Image showing upgraded screw clips for secure installation of outdoor lights

Image: Illustration of upgraded screw clips for secure light installation.

Outdoor lights installed along house eaves, showcasing the aesthetic result

Resim: Eskiample of lights installed along house eaves.

3. Gücü Bağlama

Connect the light string to the adapter with the control box, then plug the adapter into a suitable outdoor power outlet. Ensure all connections are secure.

Kullanım Talimatları

Your Brightever Permanent Outdoor Lights can be controlled via a dedicated mobile application or the included remote control.

1. Kontrol Yöntemleri

  • Mobil Uygulama: Download the compatible app (refer to packaging or quick start guide for QR code/name). The app allows for full customization, including color selection (16 million colors), brightness adjustment, scene modes, DIY modes, and timer settings.
  • Uzaktan kumanda: Use the included remote to power on/off, change colors, select preset scenes, and adjust brightness. The remote control operates on a nonstandard battery (included).
Image showing the Brightever outdoor lights installed on a house, with a smartphone displaying the control app and a physical remote control

Resim: Üzeriview of app and remote control options for the lights.

Image illustrating three control methods: app, remote, and control box, with icons for 90 scene modes, brightness, and timing

Image: Three ways to control the lighting: app, remote, and control box.

2. Lighting Modes and Features

  • 90+ Dynamic Scene Modes: Choose from a variety of pre-programmed lighting effects suitable for different occasions (e.g., holidays, parties, daily ambiance).
  • Müzik Senkronizasyonu: The lights can pulse, flash, and glow in sync with music, creating an immersive experience.
  • Kendin Yap Modları: Kendi özel aydınlatma desenlerinizi ve renk kombinasyonlarınızı oluşturun ve kaydedin.
  • Renk Sıcaklığı Ayarı: Select between warm white (2700K) for cozy evenings and cool white (up to 6500K) for crisp illumination.
  • Parlaklık Kontrolü: Adjust the light intensity to your preference. Each light provides 100 lm.
  • Zamanlayıcı Ayarları: Schedule the lights to turn on or off at specific times.
People enjoying an outdoor gathering with lights set to Music Mode, synchronizing with beats

Image: Lights operating in Music Mode during an outdoor gathering.

Bakım

The Brightever Permanent Outdoor Lights are designed for durability and minimal maintenance. Regular checks can ensure optimal performance.

  • Temizlik: Gently wipe the lights and cables with a soft, damp Kir veya kalıntıları temizlemek için bez kullanın. Sert kimyasallar veya aşındırıcı temizleyiciler kullanmayın.
  • Dayanıklılık: The lights feature an IP65 waterproof rating and are constructed with UV-resistant materials, allowing them to withstand rain, snow, and intense sunlight. They are tested to operate in temperatures from -4°F to 140°F (-15°C to 60°C).
  • Ömür: The LED lights have an estimated lifespan of up to 50,000 hours.
  • Kablo Bütünlüğü: Periodically inspect the cables and connections for any signs of wear or damage. The thickened PVC cable jackets are designed for enhanced durability.
Image showing outdoor lights in various weather conditions, highlighting IP65 waterproof rating, 50,000 hours lifespan, and -4°F to 140°F working temperature

Image: Durability features including IP65 waterproof rating and wide operating temperature range.

Sorun giderme

SorunOlası NedenÇözüm
Işıklar açılmıyor.Elektrik yok, bağlantı gevşek, adaptör arızalı.
  • Elektrik prizinin çalışıp çalışmadığını kontrol edin.
  • Tüm kablo bağlantılarının güvenli olduğundan emin olun.
  • Verify the adapter is properly connected to the control box and power source.
Uzaktan kumanda çalışmıyor.Battery depleted, remote out of range, obstruction.
  • Uzaktan kumanda pilini değiştirin.
  • Ensure the remote is pointed towards the control box and within effective range.
  • Uzaktan kumanda ile kontrol kutusu arasındaki engelleri kaldırın.
Uygulama bağlantı sorunları.Bluetooth/Wi-Fi interference, app not updated.
  • Ensure Bluetooth/Wi-Fi is enabled on your device.
  • Restart the app and the lights.
  • Cihazınızın uygulama mağazasından uygulama güncellemelerini kontrol edin.
Lights are not the expected length.Misunderstanding of product length.
  • Note that the 62FT length refers to the total string length, which includes the power cord and the illuminated section.
  • The string light cannot be cut or extended.

Sorunlar devam ederse lütfen müşteri desteğiyle iletişime geçin.

Özellikler

ÖzellikDetay
Model NumarasıSLL-DIY-RGBW6225
MarkaDaha parlak
Işık Kaynağı TürüNEDEN OLMUŞ
Işık Kaynağı Sayısı25
Toplam Uzunluk62 Ayak
Renk Sıcaklığı2700K (Sıcak Beyaz) - 6500K (Soğuk Beyaz)
Lumen Output per Light100 lm
Cilttage30 Volt (Düşük Hacim)tage Adapter)
Güç KaynağıKablolu Elektrik
MalzemeAkrilonitril Bütadien Stiren (ABS)
Su Geçirmezlik DerecesiIP65
Çalışma Sıcaklığı-4°F ila 140°F (-15°C ila 60°C)
Ömür50,000 saate kadar
Uzaktan Kumanda Pili1 Standart Dışı Pil (dahil)

Garanti ve Destek

For warranty information or technical support, please refer to the contact details provided on the product packaging or the official Brightever website. Please have your model number (SLL-DIY-RGBW6225) and purchase date available when contacting support.

© 2025 Brightever. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.