Traxon Allegro XB36 Outdoor LED Wall Washer Flood Instruction Manual

1. Giriş

This manual provides essential information for the safe installation, operation, and maintenance of the Traxon Allegro XB36 Outdoor LED Wall Washer Flood (Model: XB.W3.8370110). Please read these instructions thoroughly before installation and retain them for future reference.

The Allegro XB36 is a robust outdoor LED flood light fixture designed for wall washing applications, featuring a 3000K color temperature and 120V operation. Its IP66 rating ensures suitability for various outdoor environments.

Şekil 1: Ön taraf view of the Traxon Allegro XB36 LED Wall Washer Flood Light.

2. Güvenlik Bilgileri

• Elektrik Tehlikesi: Installation and servicing must be performed by a qualified electrician in accordance with all national and local electrical codes. Disconnect power before installation or maintenance.
• Cilttage: This fixture operates on 120 VAC. Ensure the power supply matches the fixture's requirements.
• Topraklama: Elektrik çarpmasını önlemek için armatürün doğru şekilde topraklanmış olduğundan emin olun.
• Açık Hava Kullanımı: The fixture is IP66 rated for outdoor use. Ensure all connections are sealed to maintain this rating.
• Sıcaklık: Cihazı belirtilen ortam sıcaklığı aralığının dışında çalıştırmayın.
• İşleme: Cihazı dikkatli kullanın. Düşürmekten veya şiddetli darbelere maruz bırakmaktan kaçının.
• Işık kaynağı: Do not stare directly into the LED light source when the fixture is operating, as this may cause eye strain or damage.

3. Paket İçeriği

Paketi açtığınızda tüm bileşenlerin mevcut ve hasarsız olduğunu doğrulayın:

• Traxon Allegro XB36 Outdoor LED Wall Washer Flood Fixture (XB.W3.8370110)
• Mounting Bracket (pre-attached or separate)
• Kullanım Kılavuzu (bu belge)

Note: Mounting hardware (screws, anchors) may not be included and should be selected based on the mounting surface.

4. Kurulum ve Kurulum

4.1 Armatürün Montajı

1. Konum Seçin: Choose a suitable mounting location that can support the weight of the fixture and provides the desired light coverage. Ensure the surface is stable and secure.
2. Pozisyon Parantez İçinde: If the mounting bracket is separate, attach it to the desired surface using appropriate screws and anchors (not supplied). If pre-attached, mark the drilling points.
3. Güvenli Fikstür: Securely attach the fixture to the mounting surface using the integrated bracket. Adjust the angle of the fixture as needed for optimal light direction.

4.2 Elektrik Bağlantısı

The Allegro XB36 features 'IN' and 'OUT' ports for power connection and daisy-chaining multiple units. Ensure power is disconnected before proceeding.

Şekil 2: Arka view of the fixture, highlighting the 'IN' and 'OUT' power connection ports.

1. Güç Bağlantısının Kesilmesi: Turn off the main power supply at the circuit breaker before making any electrical connections.
2. Giriş Gücünü Bağlayın: Connect the 120 VAC power supply cable to the 'IN' port of the fixture. Ensure a watertight seal using the provided cable glands.
3. Papatya Zinciri (Opsiyonel): If connecting multiple fixtures, use a suitable cable to connect the 'OUT' port of the first fixture to the 'IN' port of the next fixture. Observe maximum load limits for the circuit.
4. Güvenli Bağlantılar: Ensure all cable glands are tightened securely to maintain the IP66 rating and prevent water ingress.

Şekil 3: Arka view of the fixture with power cables properly connected to the 'IN' and 'OUT' ports.

Important: All wiring must comply with local electrical codes and regulations.

5. Kullanım Talimatları

1. Güç Açık: Once installation is complete and all connections are secure, restore power to the circuit. The fixture should illuminate.
2. Karartma: The Allegro XB36 supports phase-cut dimming. Use a compatible 120V phase-cut dimmer switch (not supplied) to adjust the light output intensity.
3. Işın Açısı: The fixture provides a 7° light distribution, ideal for focused wall washing effects.
4. Ayarlama: The mounting bracket allows for angular adjustment of the fixture to direct the light as desired. Ensure adjustment screws are tightened after positioning.

6. Bakım

The Traxon Allegro XB36 is designed for minimal maintenance due to its durable construction and IP66 rating. However, periodic checks are recommended.

• Temizlik: Periyodik olarak lensi ve gövdeyi yumuşak bir bezle temizleyin.amp cloth to remove dirt, dust, or debris that may accumulate and affect light output. Do not use abrasive cleaners or solvents.
• Denetleme: Annually inspect the fixture, mounting hardware, and electrical connections for any signs of wear, corrosion, or damage. Ensure all cable glands remain tight.
• Onarımlar: Do not attempt to repair the fixture yourself. Contact qualified service personnel for any repairs or internal maintenance.

7. Sorun Giderme

8. Özellikler

• Modeli: XB.W3.8370110
• Marka: Traxon
• Giriş Voltage: 120 VAC
• Netage: 44 watt
• Lümen Çıkışı: 2631 lümen
• Renk Sıcaklığı (CCT): 3000K
• Işık Dağılımı: 7°
• Karartma: Phase Cut Dimmable
• IP Derecelendirmesi: IP66 (Dış Mekan Kullanımına Uygun)
• Yapı: Aluminum/Glass
• Sona ermek: Siyah
• Ürün Ağırlığı: 13.14 pound (5.96 kg)
• Ürün Ölçüleri: 9 x 5.3 x 11.3 inç (22.86 x 13.46 x 28.7 cm)
• Üretici: Osram

9. Garanti Bilgileri

Warranty terms and conditions for the Traxon Allegro XB36 are typically provided at the point of purchase or can be found on the official Traxon website. Please retain your proof of purchase for warranty claims. For specific details regarding your product's warranty, refer to the documentation included with your purchase or contact the manufacturer directly.

10. Destek

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact your authorized Traxon dealer or the manufacturer's customer support. Provide your product model number (XB.W3.8370110) and a detailed description of the issue when seeking support.