GAMEMAX N90 BG ATX PC Case User Manual

1. Giriş

This manual provides detailed instructions for the installation, operation, and maintenance of your GAMEMAX N90 BG ATX PC Case. The N90 BG features a modular dual-chamber design, a 512-LED matrix display, and panoramic curved glass. It is designed for BTF motherboards, offering a cable-free interior, efficient 270° cooling, and includes six ARGB PWM fans. Please read this manual thoroughly before beginning assembly to ensure proper setup and optimal performance.

Şekil 1: Ön taraf view of the GAMEMAX N90 BG ATX PC Case, showcasing its panoramic curved glass, internal components, and the integrated LED display.

2. Paket İçeriği

Verify that all components are present before proceeding with the installation:

• GAMEMAX N90 BG ATX PC Case
• Accessory box (screws, standoffs, cable ties)
• Six pre-installed ARGB PWM fans
• Kullanım Kılavuzu (bu belge)

3. Kurulum ve Kurulum

Follow these steps for proper assembly of your PC components within the GAMEMAX N90 BG case.

3.1. Davayı Hazırlama

1. Paketin açılması: Kutuyu ambalajından dikkatlice çıkarın.
2. Panel Kaldırma: The panoramic curved glass and side panels can be removed for easier access. Refer to Figure 2 for an interior view.

Şekil 2: İç mekan view of the GAMEMAX N90 BG case, highlighting the spacious motherboard tray and fan mounting locations.

Şekil 3: Yan view of the case with the panel removed, providing access to the internal structure for component installation.

3.2. Anakart Kurulumu

The N90 BG supports ATX motherboards, including BTF (Back-To-the-Future) motherboards for a cable-free aesthetic. Install the necessary standoffs for your motherboard size, then carefully place the motherboard and secure it with screws.

Şekil 4: Dahili view demonstrating potential component placement and cable routing paths.

3.3. Güç Kaynağı Kurulumu

The case features a bottom mount for the power supply. Install your power supply unit (PSU) into the designated compartment at the bottom of the case and secure it with screws from the rear.

Şekil 5: Arka view of the case, illustrating the power supply mounting area and expansion slots.

3.4. Depolama Sürücüsü Kurulumu

Utilize the available drive bays for 2.5-inch SSDs or 3.5-inch HDDs. Refer to the accessory box for specific mounting hardware.

3.5. Fan ve Radyatör Montajı

The case comes with six pre-installed ARGB PWM fans for efficient 270° cooling. Additional fans or radiators can be mounted in various positions (top, side, rear) as needed. Ensure proper airflow direction for optimal cooling.

Figure 6: Top-down interior view, showing available mounting points for additional fans or liquid cooling radiators.

3.6. Kablo Yönetimi

The dual-chamber design and BTF motherboard compatibility facilitate excellent cable management, allowing for a clean, cable-free interior. Route all cables through the designated cutouts and secure them using the provided cable ties in the rear chamber.

Şekil 7: Yan view of the case, illustrating the solid panel that conceals the cable management area.

4. Kullanım Talimatları

4.1. Açma

After all components are installed and cables are connected, close all panels. Connect the power cable to your PSU and press the power button located on the front panel of the case.

4.2. 512-LED Matrix Display

The integrated 512-LED matrix display on the front panel can be customized to show various information or patterns. Refer to your motherboard's software or the GAMEMAX utility (if applicable) for configuration options.

4.3. ARGB PWM Fans

The six pre-installed ARGB PWM fans are connected to a controller or directly to your motherboard. Fan speed and RGB lighting can typically be controlled via motherboard software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion) or a dedicated fan controller.

5. Bakım

Düzenli bakım, bilgisayar kasanızın uzun ömürlü olmasını ve en iyi performansı göstermesini sağlar.

• Toz Filtreleri: Periodically clean the dust filters located on the intake areas of the case. Gently remove them and clean with compressed air or water (ensure they are completely dry before reinstallation).
• Dış Temizlik: Wipe the exterior surfaces, including the panoramic curved glass, with a soft, damp bez. Aşındırıcı temizleyicilerden kaçının.
• İç Temizlik: İç bileşenlerden ve fanlardan tozu temizlemek için basınçlı hava kullanın. Temizlemeden önce sistemin kapalı ve fişinin çekilmiş olduğundan emin olun.

6. Sorun Giderme

Sorunlarla karşılaşırsanız aşağıdaki genel sorun giderme adımlarına bakın:

• Güç Yok:
  • Güç kaynağının açık olduğundan ve duvar prizine doğru şekilde bağlı olduğundan emin olun.
  • Verify all power cables (24-pin ATX, CPU, GPU) are securely connected to the motherboard and components.
  • Check the front panel power switch connection to the motherboard.
• Fanlar dönmüyor / LED'ler yanmıyor:
  • Confirm fan and ARGB cables are correctly connected to the motherboard headers or fan controller.
  • Check motherboard BIOS/UEFI settings or software for fan and RGB control.
• Görüntüleme Sorunları:
  • Ensure your monitor is connected to the graphics card, not the motherboard's integrated graphics (unless using integrated graphics).
  • Ekran kartının PCIe yuvasına düzgün bir şekilde takılı olduğundan ve yeterli güç aldığından emin olun.

For further assistance, consult your motherboard manual or the GAMEMAX support resources.

7. Özellikler

8. Garanti ve Destek

GAMEMAX stands behind the quality of its products. While specific warranty details may vary by region, GAMEMAX products are designed for reliability and performance.

For technical support, warranty claims, or further inquiries, please visit the official GAMEMAX store or contact their customer service. You can find more information and support resources at the Amazon'daki GAMEMAX Mağazası.