BoxWave DirectSync USB 3.0 A to USB 3.1 Type C Cable

BoxWave DirectSync USB 3.0 A to USB 3.1 Type C Cable User Manual

Model: DirectSync USB 3.0 A to USB 3.1 Type C Cable

giriiş

The BoxWave DirectSync USB 3.0 A to USB 3.1 Type C Cable is designed to provide efficient charging and high-speed data transfer for your compatible devices, such as the Sonim H100 4G. This 6-foot cable offers reliable connectivity and durability for everyday use.

Ürün Özellikleri

Hi-Speed USB 3.1 Data Transfers: Supports rapid data synchronization.
Dual-Functionality: Capable of both charging your device and transferring data simultaneously.
Generous 6-Foot Length: Provides flexibility and convenience for use in various settings.
Shielded Cable Design: Offers protection for enhanced durability and longevity.
Reinforced Strain Reliefs: Features strong rubberized grommet strain reliefs to prevent kinks and splitting at the connectors.

Kurmak

Setting up your DirectSync cable is straightforward. No software installation is required for basic functionality.

Bağlantı Noktalarını Belirleyin: Locate the USB-A port on your charging adapter, computer, or power bank, and the USB-C port on your device (e.g., Sonim H100 4G).
USB-A bağlantısını yapın: Insert the USB-A end of the DirectSync cable into a compatible USB-A port on your power source or computer.
USB-C bağlantısını kurun: Insert the USB-C end of the DirectSync cable into the USB-C port on your device.
Bağlantıyı Doğrulayın: Ensure both ends are securely connected. Your device should indicate charging or a data connection.

BoxWave DirectSync USB 3.0 A to USB 3.1 Type C Cable connected to a Sonim H100 4G device. — Image: The BoxWave DirectSync cable shown alongside a Sonim H100 4G device, illustrating the connection type.

Kullanım Talimatları

Cihazınızı Şarj Etme

To charge your device, connect the DirectSync cable as described in the Setup section. The cable will deliver power from the USB-A source to your USB-C device. Charging speed may vary depending on the power output of your charger and the device's charging capabilities.

A smartphone connected to a laptop via the BoxWave DirectSync cable, showing the phone charging. — Image: The DirectSync cable facilitating charging and data transfer between a laptop and a smartphone, highlighting its dual functionality.

Veri Senkronizasyonu

For data transfer, connect the USB-A end to a computer's USB 3.0 or higher port and the USB-C end to your device. Your computer should recognize the connected device, allowing you to transfer files, photos, and other data at high speeds (up to USB 3.1 specifications).

A tablet and a power bank connected by the BoxWave DirectSync cable on a wooden desk. — Image: The DirectSync cable connecting a tablet to a power bank, demonstrating its use for charging portable devices.

Bakım

Proper care will extend the life of your DirectSync cable.

Depolamak: When not in use, coil the cable loosely. Avoid sharp bends or kinks, especially near the connectors.
Temizlik: Use a soft, dry cloth to wipe the cable and connectors. Do not use liquid cleaners or abrasive materials.
İşleme: Always pull from the connector head, not the cable itself, when unplugging.
Çevre: Kabloyu aşırı sıcaklıklara, doğrudan güneş ışığına veya aşırı neme maruz bırakmaktan kaçının.

Close-up of the reinforced strain relief on the BoxWave DirectSync cable's USB-C connector. — Resim: Ayrıntılı view of the reinforced strain relief on the cable's connector, designed to prevent damage from bending.

Sorun giderme

Sorun	Olası Neden	Çözüm
Cihaz şarj olmuyor.	Loose connection, faulty power source, or incompatible device.	Ensure both ends of the cable are securely plugged in. Try a different power outlet or USB port. Verify your device supports USB-C charging.
Yavaş şarj hızı.	Low power output from source, or device limitation.	Use a charger with higher power output (e.g., a wall adapter instead of a computer USB port). Ensure your device supports fast charging if applicable.
Veri aktarımı çalışmıyor.	Loose connection, incorrect USB port on computer, or device settings.	Reconnect the cable. Try a different USB port on your computer (preferably a USB 3.0 or higher port). Check your device's USB connection settings (e.g., "File Aktarım modu).
Kablo hasar görmüş gibi görünüyor.	Fiziksel stres veya yanlış kullanım.	Discontinue use immediately to prevent damage to your devices. Replace the cable.

Özellikler

Ürün Adı: BoxWave DirectSync USB 3.0 A to USB 3.1 Type C Cable
Modeli: DirectSync
Bağlayıcı Tip 1: USB 3.0 Type-A Male
Bağlayıcı Tip 2: USB 3.1 Type-C Male
Kablo Uzunluğu: 6 fit (yaklaşık 1.8 metre)
Veri Aktarım Hızı: Supports Hi-Speed USB 3.1 (up to 5Gbps)
İşlevsellik: Charge and Sync
Renk: Siyah
Ürün Ağırlığı: 3 ons
Üretici: Kutu dalgası

Garanti ve Destek

BoxWave products are designed for quality and reliability. This product includes limited 3rd party technical support for your device (up to 3 inquiries via messaging). For further assistance or warranty inquiries, please contact BoxWave Corporation directly through their official support channels.

Please note that this product is not affiliated with or endorsed by Sonim.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.