mGYDY Bafang 810S LCD eBike Display User Manual

1. Giriş

This manual provides essential information for the installation, operation, and maintenance of your mGYDY Bafang 810S LCD eBike Display. Please read this manual thoroughly before using the product to ensure proper function and safety.

2. Güvenlik Bilgileri

• Sürüşe başlamadan önce ekranın güvenli bir şekilde monte edildiğinden emin olun.
• Ekranı sökmeye veya değiştirmeye çalışmayın. Bu, garantiyi geçersiz kılabilir ve hasara neden olabilir.
• Keep the display away from extreme temperatures and direct sunlight for prolonged periods.
• Ensure all connections are dry and properly sealed before use, especially in wet conditions.
• Pay attention to your surroundings while riding. Do not become overly distracted by the display.

3. Paket İçeriği

Paketin içinde tüm öğelerin mevcut olduğundan emin olun:

• 1 x Bafang 810S LCD Display
• 1 x Display Holder
• Gaskets for installation

4. Ürün Bittiview

The mGYDY Bafang 810S LCD eBike Display is designed to provide essential riding data and control for your Bafang mid-drive motor system. It features a color VA LCD screen for clear visibility in various lighting conditions.

Resim: Üzerindeview of the Bafang 810S display showing various instrument features such as headlamps, speed loop, battery display, speed display, assist gear, fault prompt, walking mode, brake prompt, mileage mode, and mileage display.

Temel Özellikler:

• Color VA LCD: Geniş viewing angle, no flicker, high brightness for better visual effect under sunlight.
• Independent Button: Easy to operate interface.
• Kapsamlı Veri Görüntüleme: Speed (Real-time, MAX, AVG), Mileage (Odometer, Trip distance, Riding Time), Battery indicator (5-level, Voltagyüzdetage).
• Ayarlanabilir Parlaklık: Day and Night Mode with 5-level brightness adjustment (1: darkest; 5: brightest).
• Assistant Level Control: 3, 5, or 9 adjustable assist levels.
• Yürüyüş Modu: Provides assistance when walking alongside your e-bike.
• Hata Kodu Ekranı: Indicates system faults.
• Su Geçirmezlik Sınıfı: IP65, resistant to rain and splashing water.

5. Özellikler

Resim: Detailed product parameters including dimensions, power supply, waterproof grade, and communication protocol.

6. Kurulum ve Kurulum

Uyumluluk Kontrolü:

The 810S display is designed for Bafang mid-drive motors (BBS01, BBS02, BBSHD) that use the UART iletişim protokolü ve bir 5-pin female plug. It is not compatible with CAN protocol motors or male plugs.

Resim: Visual guide for checking compatibility with UART protocol 5-pin female connectors and Bafang BBS series or hub motors. Incompatible with CAN protocol motors.

Kurulum Adımları:

1. Ekranı monte edin: Install the 810S display holder on the left side of your e-bike's handlebar. The holder is designed for handlebars with a diameter of φ22.2mm (0.87in). Secure it firmly using the provided gaskets and screws.
2. Kabloyu bağlayın: Carefully connect the 5-pin female plug of the display to the corresponding 5-pin male plug on your e-bike's wiring harness. Ensure the connection is secure and fully seated.
3. Kablo yönetimi: Route the display cable neatly along the handlebar and frame, securing it with cable ties to prevent interference with moving parts.
4. İlk Açılış: After installation, power on your e-bike to verify the display functions correctly.

7. Kullanım Talimatları

The 810S display features an intuitive interface with an independent button for navigation and settings.

Ekran fonksiyonları:

• Hız Göstergesi: Shows real-time speed, maximum speed (MAX), and average speed (AVG).
• Mileage Indicator: Displays Odometer (total distance), Trip distance, and Riding Time.
• Pil Göstergesi: Provides a 5-level power indicator and voltagyüzdetage for accurate battery status.
• Assistant Level: Adjust pedal assist levels from 0-9 (or 3/5/9 depending on configuration).
• Far Kontrolü: Activate or deactivate your e-bike's headlight (if connected).
• Yürüyüş Modu: Engage for low-speed assistance when pushing the bike.
• Hata Kodu: Displays codes if a system fault is detected.

Resim: The intelligent instrument panel displaying electricity, speed, current gear, battery level prompt, speed display, PAS levels, walking mode, and mileage time.

Ayarlar Düzenlemesi:

• Parlaklık ayarı: Toggle between Day and Night modes. Adjust brightness through 5 levels (1 being darkest, 5 brightest) to suit ambient light conditions.
• Metric / Imperial: Set units according to your preference (Km/h or Mph, Km or Miles).
• Açılış Şifresi: Configure a password for added security (refer to your e-bike controller manual for specific instructions if applicable).

Resim: Illustration of the display's brightness adjustment feature, showing optimal visibility in both day and night conditions.

8. Bakım

Proper maintenance ensures the longevity and optimal performance of your 810S display.

• Temizlik: Yumuşak bir d kullanınamp cloth to clean the display screen. Avoid abrasive cleaners or solvents that could damage the screen or casing.
• Suya Dayanıklılık: The display has an IP65 waterproof rating, meaning it is protected against dust and low-pressure water jets. While it can withstand rain and splashes, avoid submerging it in water or exposing it to high-pressure washing.
• Depolamak: When not in use for extended periods, store the e-bike and display in a dry, cool place, away from direct sunlight and extreme temperatures.
• Bağlantı Kontrolü: Periodically check the cable connection for any signs of wear or corrosion. Ensure it remains securely plugged in.

Resim: The Bafang 810S display demonstrating its IP65 waterproof capability, showing it can resist rain and water splashing.

9. Sorun Giderme

If you encounter issues with your 810S display, refer to the following common troubleshooting tips:

• Ekran Açılmıyor:
  • Elektrikli bisikletin bataryasının şarjlı ve açık olduğundan emin olun.
  • Verify that the 5-pin cable connection between the display and the controller is secure and undamaged.
• No Speed/Mileage Data:
  • Ensure the speed sensor on your e-bike is properly installed and aligned.
  • Check for any loose connections to the speed sensor.
• Görüntülenen hata kodu:
  • Note down the error code. Refer to your Bafang motor or controller manual for specific error code meanings and solutions.
  • Often, turning the e-bike off and on again can clear temporary errors.
• Yanlış Okumalar:
  • Ensure the wheel circumference setting in the display's advanced settings (if accessible) matches your e-bike's wheel size.

If problems persist, contact the seller or a qualified e-bike technician for assistance.

10. Garanti ve Destek

Garanti bilgileri ve müşteri desteği için lütfen satın alma sırasında verilen belgelere bakın veya satıcınızla iletişime geçin. Garanti talepleri için satın alma belgenizi saklayın.