1. Giriş
The Plinkwirekb USB 10G Tester (Model PCM-KW-514) is a versatile diagnostic tool designed to quickly test the speed, signal protocol, and voltage status of various USB interfaces. It supports USB 2.0, USB 3.0, USB 3.1 Gen 1 (5Gbps), and USB 3.1 Gen 2 (10Gbps) for both Type-A and Type-C connections. This manual provides detailed instructions for its setup, operation, and maintenance to ensure accurate and efficient use.
2. Ürün Özellikleri
- Multi-Port USB Interface Testing: Supports quick testing of USB 2.0/3.0, USB Type-C 3.1/3.0, USB Hub speed, USB signal protocol, and voltage durumu.
- Kablo Uyumluluğu: Capable of testing USB 2.0, 3.0, and Type-C 3.1 extension cables, as well as male-to-male cables.
- Efficient PCBA Board Testing: Features plug-and-play identification for PCBA board 2.0/3.0 testing, improving signal quality and detection capabilities.
- Protocol Identification: Quickly identifies 10G and 5G protocol interfaces.
- LED Göstergeleri: Clear LED indicators for USB 2.0 (U2), USB 3.0 (U3), USB 3.1 Gen 2 (10G), and Overvoltage Koruma (OVP).
- aşırı sestage Protection (OVP) Warning: Alerts users if the test port voltage exceeds 5V to prevent device damage.
- Geniş Uygulama: Suitable for testing USB Type-A and Type-C interfaces on computers, notebooks, USB hubs, mobile hard drives, USB flash drives, and for factory testing, QC inspection, and laboratory use.
- Çift Başlı Tasarım: Features both USB Type-A and Type-C connectors for broad compatibility.
3. Paket İçeriği
- 1 x Plinkwirekb USB 10G Tester (PCM-KW-514)
4. Özellikler
| Parametre | Değer |
|---|---|
| Model Numarası | PCM-KW-514 |
| Bağlayıcı A | USB 3.0 Type-A Male |
| B Bağlantısı | USB 3.1 Type-C Male |
| USB 2.0 Hızı | 480 Mb/sn |
| USB 3.0 (USB 3.1 Gen 1) Speed | 5 Gbps |
| USB 3.1 (USB 3.1 Gen 2) Speed | 10 Gbps |
| Boyutlar | 6.3 x 4.8 x 1.2 inç (Paket) |
| Ağırlık | 1.06 ons (Paket) |
5. Kurulum
The Plinkwirekb USB 10G Tester is designed for plug-and-play operation. No software installation or external power supply is required. Simply connect the tester to the USB port or cable you wish to evaluate.
6. Kullanım Talimatları
6.1 Temel İşlemler
To use the tester, simply plug the appropriate end (USB-A or USB-C) into the port or cable you want to test. The device will automatically begin its diagnostic process, and the results will be indicated by the illuminated LEDs.
6.2 USB Port Detection and LED Indicators
The tester features several LED indicators to display the detected USB protocol and status:
- U2 Indicator: Lights up when a USB 2.0 connection is detected.
- U3 Indicator: Lights up when a USB 3.0 (5Gbps) connection is detected.
- 10G Göstergesi: Lights up when a USB 3.1 Gen 2 (10Gbps) connection is detected.
- OVP Indicator: Lights up if an overvoltage condition is detected (voltag(e > 5V).
Detection Logic:
- When testing a USB 2.0 port: The U2 göstergesi yanacaktır.
- When testing a USB 3.0 (5G) port: The U3 Ve U2 indicators will light up.
- When testing a USB 3.1 (10G) port: The 10G Ve U2 indicators will light up. The U3 indicator will not light up in this scenario.
6.3 Aşırı hacimtage Protection (OVP) Indication
The OVP indicator provides a critical safety warning. If the voltage at the test port exceeds 5V, the OVP LED will light up. This alerts the user to a potential overvoltage condition, which could damage connected devices. Disconnect the tester immediately if the OVP indicator illuminates and investigate the power source.
6.4 Testing USB Hubs and Devices
The tester can be used to verify the functionality and speed of USB hubs, mobile hard drives, and USB flash drives. Connect the tester to the device or hub's USB port, and observe the LED indicators to confirm the detected USB standard and voltage durumu.
7. Bakım
- Temizlik: Use a soft, dry cloth to clean the exterior of the tester. Avoid using liquid cleaners or solvents.
- Depolamak: Test cihazını serin, kuru ve doğrudan güneş ışığından ve aşırı sıcaklıklardan uzak bir yerde saklayın.
- İşleme: Cihazı düşürmekten veya şiddetli darbelere maruz bırakmaktan kaçının, çünkü bu iç bileşenlere zarar verebilir.
8. Sorun Giderme
- No LEDs light up: Ensure the tester is fully inserted into a powered USB port. Check if the host device is providing power.
- Incorrect speed detected: Verify that the cable and the host port both support the desired USB standard. Some USB-C to USB-A adapters or cables may only support USB 2.0 or 3.0 speeds.
- OVP indicator lights up: Immediately disconnect the tester. This indicates an overvoltage condition (above 5V) which can damage devices. Investigate the power source or port for faults.
- Aralıklı bağlantı: Ensure all connections are secure and free from debris. Try testing with a different cable or port to isolate the issue.
9. Garanti ve Destek
For any issues, defects, or questions regarding the Plinkwirekb USB 10G Tester, please contact the manufacturer or your point of purchase. Please refer to your purchase documentation for specific warranty terms and contact information. The manufacturer is committed to resolving product-related concerns promptly.
