1. Giriş
This manual provides essential information for the safe and efficient installation, operation, and maintenance of the Mean Well EDR-120-24 AC/DC DIN Rail Power Supply. The EDR-120 series is an economical, slim 120W power supply designed for industrial applications. It is suitable for installation on TS-35/7.5 or TS-35/15 mounting rails, featuring a compact 40mm width for space-saving within cabinets. This unit operates effectively in ambient temperatures between -20℃ and 60℃ under air convection.
Please Note: The EDR series is primarily for industrial applications. For household applications, please choose the NDR series.
2. Güvenlik Bilgileri
Kurulum ve çalıştırmadan önce tüm talimatları dikkatlice okuyun. Bu talimatlara uyulmaması elektrik çarpmasına, yangına veya ciddi yaralanmaya neden olabilir.
- Kalifiye Personel: Montaj ve bakım işlemleri sadece kalifiye personel tarafından yapılmalıdır.
- Güç Bağlantısının Kesilmesi: Always disconnect the main power supply before any installation, wiring, or maintenance work.
- Uygun Topraklama: Elektrik çarpmasını önlemek için topraklamanın uygun olduğundan emin olun.
- Havalandırma: Maintain adequate ventilation around the unit. Do not obstruct ventilation openings.
- Çevresel Koşullar: Operate the power supply within the specified temperature and humidity ranges. Avoid exposure to moisture or corrosive environments.
- Tel Özellikleri: Use copper wire only, rated for a minimum of 75℃.
- Endüstriyel Kullanım: This product is designed for industrial control equipment.
3. Ürün Bittiview ve Özellikler
The EDR-120-24 is a robust AC/DC power supply offering reliable performance for various industrial needs. Key features include:
- Çıktı: 24V, 5A, 120W.
- Giriş Voltage: 90 ~ 264VAC / 124 ~ 370VDC.
- Korumalar: Short circuit, Overload, Over Voltage, Aşırı Sıcaklık.
- Yeterlik: High efficiency of 87.5% (typical).
- Sertifikalar: UL and CE certified, UL 508 (Industrial Control Equipment) approved.
- Kompakt Tasarım: Slim 40mm width for space-saving DIN rail mounting.
- Soğutma: Air convection cooling.
Şekil 1: Ön view of the Mean Well EDR-120-24 power supply, showing input/output terminals, voltage adjustment, and DC OK indicator.
4. Mekanik Özellikler
The EDR-120-24 features a compact design suitable for DIN rail mounting. Detailed dimensions are provided below.
Figure 2: Mechanical drawing of the EDR-120-24, showing top, side, front, and bottom views with dimensions in millimeters (tolerance ±1mm).
Terminal Pin Ataması
| Pin No. | Atama |
|---|---|
| 1 | FG (Çerçeve Zemin) |
| 2 | AC/N or DC - |
| 3 | AC/L veya DC + |
| Pin No. | Atama |
|---|---|
| 1,2 | DC ÇIKIŞ -V |
| 3,4 | DC ÇIKIŞ +V |
5. Kurulum (Setup)
Follow these steps for proper installation of the EDR-120-24 power supply.
5.1 Montaj
- The EDR-120-24 is designed for DIN rail mounting on TS-35/7.5 or TS-35/15 rails.
- Ensure sufficient clearance for air circulation. A minimum of 5mm left and right, 40mm above, and 20mm below the power supply is recommended for optimal cooling.
- To mount, hook the top edge of the power supply onto the DIN rail, then push the bottom edge firmly until it clicks into place.
Şekil 3: Yan view illustrating the DIN rail mounting mechanism.
5.2 Kablolama
All connections are made via screw terminal blocks. Refer to the Terminal Pin Assignment tables in Section 4.
- Input Wiring (TB1): Connect the AC mains (L, N) or DC input (+, -) to the corresponding terminals. Ensure the Frame Ground (FG) terminal is properly connected to earth ground. The input voltagAralık 90-264VAC veya 127-370VDC'dir.
- Output Wiring (TB2): Connect your load to the DC OUTPUT +V and -V terminals.
- Tel Tipi: Use copper wire only, rated for a minimum of 75℃.
- Tork: Ensure terminal screws are tightened to the specified torque (Input: 6.5 Lb-in, Output: 5.5 Lb-in) to prevent loose connections.
Şekil 4: Ör.ample wiring diagrams for different input configurations. Always refer to the product label for specific terminal markings.
6. Operasyon
Once installed and wired correctly, the EDR-120-24 is ready for operation.
- Güç Açık: Apply the specified AC or DC input voltage.
- DC OK Göstergesi: Çıkış ses seviyesi uygun olduğunda "DC OK" yazılı yeşil bir LED yanacaktır.tage kabul edilebilir aralıktadır.
- Çıkış Hacmitage Ayarlama: çıkış hacmitage can be finely adjusted using the "+V ADJ" potentiometer located on the front panel. Use a small screwdriver to turn the potentiometer clockwise to increase voltage or counter-clockwise to decrease it.
7. Bakım
The EDR-120-24 is designed for long-term reliability with minimal maintenance. However, periodic checks are recommended.
- Temizlik: Keep the unit clean and free from dust and debris, especially around ventilation openings, to ensure proper air convection cooling. Use a soft, dry cloth for cleaning.
- Bağlantı Kontrolleri: Periodically inspect all wiring connections for tightness and signs of corrosion. Re-tighten screws if necessary after disconnecting power.
- Çevresel İzleme: Çalışma ortamının belirtilen sıcaklık ve nem sınırları içerisinde kalmasını sağlayın.
8. Sorun Giderme
If the power supply is not functioning as expected, consider the following common issues:
- No Output / DC OK LED Off:
- Check input power connections and voltage.
- Verify that the input fuse (if external) is intact.
- Check for short circuits or overloads on the output. Disconnect the load and re-test.
- Ensure the ambient temperature is within the operating range.
- Aralıklı operasyon:
- Gevşek kablo bağlantıları olup olmadığını kontrol edin.
- Verify that the load current does not exceed the rated output current (5A). Overload protection may be activating.
- Ensure adequate ventilation to prevent over-temperature shutdown.
- Yanlış Çıkış Voltage:
- Adjust the "+V ADJ" potentiometer.
- Giriş hacmini doğrulayıntage sabittir ve belirtilen aralık içindedir.
If problems persist after checking these points, contact qualified service personnel or the manufacturer.
9. Teknik Özellikler
| Parametre | Değer |
|---|---|
| Model Adı | EDR-120-24 |
| Çıkış Hacmitage | 24V |
| Anma Akımı | 5A |
| Çıkış Gücü | 120W |
| Giriş Voltage Aralık | 90 ~ 264VAC / 127 ~ 370VDC |
| Giriş Frekansı | 47 ila 63 Hz |
| Verimlilik (Tip.) | %87.5 |
| Dalgalanma ve Gürültü (Maks.) | 120mVp-p |
| Hat Düzenlemesi | %0.5 |
| Yük Düzenlemesi | 1% |
| Minimum Isolation Voltage | 3000VAC |
| Korumalar | Short circuit, Overload, Over Voltage, Aşırı Sıcaklık |
| Çalışma Sıcaklığı | -20℃ ila 60℃ |
| Soğutma Yöntemi | Air Convection |
| Boyutlar (U x G x Y) | 113.5 x 40 x 125.2 mm (4.47 x 1.57 x 4.93 inç) |
| Montaj | DIN Ray |
| Ağırlık | 600 gr |
| Sertifikalar | UL, CE, EU RoHS Compliant |
10. Garanti ve Destek
This Mean Well power supply is manufactured to high-quality standards. For warranty information, please refer to the documentation provided with your purchase or contact your distributor. For technical support or service inquiries, please reach out to the seller or the official Mean Well support channels.
Manufacturer: MEAN WELL ENTERPRISES CO., LTD.
Distributed by: KAINSC PRODUCTS KAWAGUCH INDUSTRIAL SCIENTIFIC