Dyeetic 6000A

Dyeetic 6000A Portable Car Jump Starter and Power Bank User Manual

Model: 6000A | Brand: Dyeetic

1. Giriş

Thank you for choosing the Dyeetic 6000A Portable Car Jump Starter. This device is designed to provide reliable power for jump-starting 12V vehicles, charging electronic devices, and offering emergency lighting. Please read this manual thoroughly before use to ensure safe and optimal operation.

2. Güvenlik Önlemleri

Always observe the following safety guidelines to prevent injury or damage to the device and your vehicle:

  • Read all instructions carefully before using the jump starter.
  • Doğru kutup bağlantısını sağlayın (kırmızı klips)amp pozitif, siyah clamp Kıvılcım veya hasar oluşmasını önlemek için (negatif yönde).
  • Do not attempt to jump start an engine that exceeds the maximum displacement supported by the jump starter (All Gas and 10.0L Diesel).
  • Do not crank the engine for more than 3 seconds at a time. Allow the jump starter to cool down for at least 1 minute between each start attempt.
  • Cihazı çocuklardan uzak tutunuz.
  • Cihazı aşırı sıcaklıklara, doğrudan güneş ışığına veya suya maruz bırakmayın.
  • Ensure the device has at least 50% battery charge before use for optimal performance.
  • The device features 10-in-1 smart protection, including over-current, reverse polarity, short-circuit, and over-voltage koruma.

3. Paket İçeriği

Paketinizde tüm öğelerin mevcut olduğundan emin olun:

  • Dyeetic 6000A Portable Car Jump Starter
  • Smart Jumper Cables with Force Start button
  • USB-C Şarj Kablosu
  • Kullanıcı Kılavuzu
  • Durable EVA Carrying Case
Dyeetic 6000A Jump Starter with all accessories including smart jumper cables, USB-C cable, user manual, and EVA carrying case.
Figure 1: All components included in the Dyeetic 6000A Jump Starter package.

4. Ürün Bittiview

The Dyeetic 6000A Jump Starter is a versatile device with multiple functionalities:

  • Güçlü Akü Takviye Cihazı: Delivers 6000A peak current to start 12V vehicles, including all gas and up to 10.0L diesel engines.
  • Taşınabilir Güç Bankası: Equipped with a 26800mAh battery and dual USB ports (including Quick Charge 3.0) for charging phones, tablets, and other devices.
  • Acil Durum El Feneri: Features a built-in 600-lumen LED light with Flashlight, SOS, and Strobe modes.
  • Gelişmiş Güvenlik: Incorporates 10-in-1 smart protection for safe operation.
  • Uzun bekleme süresi: Can hold its charge for up to 24 months.
Dyeetic 6000A Jump Starter connected to a car battery under the hood, highlighting its powerful 6000A capability for all gas and 10.0L diesel 12V vehicles.
Figure 2: The 6000A Jump Starter ready to power a vehicle.
Dyeetic 6000A Jump Starter functioning as a 26800mAh power bank, charging various devices like phones, game consoles, tablets, drones, earphones, cameras, and smartwatches via multiple USB outputs.
Figure 3: The device's power bank functionality with multiple outputs.
Dyeetic 6000A Jump Starter's emergency flashlight illuminating a dark road, showcasing its flashlight, SOS, and strobe modes.
Figure 4: The 600-lumen LED emergency flashlight in action.
Dyeetic 6000A Jump Starter protected by a shield icon, illustrating its 10 leading safety protections including reverse charge, reverse polarity, over voltage, low temperature, high temperature, over current, over charge, anti-spark, overload, and short circuit protection.
Şekil 5: Üzeriview of the 10 leading safety protections.
Dyeetic 6000A Jump Starter with a clock icon indicating 24 months, signifying its ultra-low power consumption and 24-month standby time on a full charge.
Figure 6: The device offers up to 24 months of standby time.

5. Kurulum: İlk Şarj İşlemi

Before first use, fully charge your Dyeetic 6000A Jump Starter. Use the provided USB-C charging cable and connect it to a compatible USB wall adapter (not included). The digital display will show the charging progress. A full charge is indicated when the display shows 100%.

6. Kullanım Talimatları

6.1. Aracınızı Takviye ile Çalıştırma

  1. Bağlantı Kablolarını Bağlayın: Insert the blue plug of the smart jumper cables into the jump starter's EC5 port. Ensure a secure connection.
  2. Cl'yi ekleamps Pil için: Kırmızı pozitif (+) cl'yi bağlayınamp to the positive terminal of your vehicle's battery. Connect the black negative (-) clamp Aracınızın aküsünün negatif kutbuna.
  3. Gösterge Işığını Kontrol Edin: The indicator light on the smart jumper cable will turn solid green if the connection is correct. If it shows red or flashes, check your connections for proper polarity. If no light, press the 'BOOST' button on the smart cable for 3 seconds to enter forced start mode (use with caution).
  4. Aracı Başlat: Once the green light is solid, start your vehicle's engine within 45 seconds. If the engine does not start, wait at least 1 minute before attempting again. Do not crank for more than 3 seconds per attempt.
  5. Cl'yi kaldıramps: After the vehicle starts, immediately remove the smart jumper cables from the vehicle battery, then disconnect them from the jump starter.
Dyeetic 6000A Jump Starter with smart jumper cables connected to a car battery, showing the correct positive and negative connections.
Figure 7: Correct connection of smart jumper cables to a vehicle battery.

Video: How to Jump Start a Car with NEXPOW Jump Starter

Video 1: This video demonstrates the step-by-step process of using a portable jump starter to start a vehicle, including connecting the clamps and initiating the start sequence.

6.2. Taşınabilir Güç Bankası Olarak Kullanma

The Dyeetic 6000A can charge various electronic devices:

  • Connect your device's USB charging cable to one of the jump starter's USB output ports (USB-A 5V/9V/12V QC3.0 or USB-A 5V/2.4A).
  • Atlama marşı cihazınızı otomatik olarak şarj etmeye başlayacaktır.
  • Dijital ekran kalan pil yüzdesini gösterecektirtagAtlama marşının e'si.

6.3. Operating the LED Emergency Flashlight

The built-in 600-lumen LED flashlight has three modes:

  1. Fener Modu: Press and hold the power button for 3 seconds to turn on the flashlight.
  2. Acil Durum Modu: With the flashlight on, press the power button once to switch to SOS signal mode.
  3. Flaş Modu: Press the power button again to activate the strobe light mode.
  4. Kapamak: Press the power button a third time to turn off the flashlight.

7. Bakım

To ensure the longevity and performance of your jump starter:

  • Düzenli Olarak Şarj Edin: Recharge the device every 3-6 months, even if not used, to maintain battery health.
  • Depolamak: Store the jump starter in a cool, dry place, away from direct sunlight and extreme temperatures. The EVA carrying case provides excellent protection.
  • Temizlik: Cihazı yumuşak, kuru bir bezle silin. Sert kimyasallar veya aşındırıcı malzemeler kullanmayın.
  • Kablo Bakımı: Inspect jumper cables for any damage before each use. Replace if frayed or damaged.

8. Sorun Giderme

SorunOlası NedenÇözüm
Atlama marşı çalışmıyor.Pil tamamen boşalmış.Atlama marşını tam olarak şarj edin.
Bağlandıktan sonra araç çalışmıyor.Incorrect connection or insufficient charge.Check polarity. Ensure jump starter is at least 50% charged. Press 'BOOST' button if no green light.
Smart cable indicator shows red/flashing.Incorrect polarity or short circuit detected.Disconnect immediately and re-check connections. Ensure clamps do not touch each other.
Harici cihaz şarj olmuyor.Jump starter battery low or cable issue.Charge the jump starter. Try a different USB cable.

9. Özellikler

ÖzellikDetay
MarkaDyeetic
Örnek6000A
Doruğa ulaşmak Ampöfke6000 Amps
Cilttage12 Volt
Pil Kapasitesi26800 mAh
Motor UyumluluğuAll Gas and 10.0L Diesel Engines
USB Çıkışı 15V/9V/12V (QC3.0)
USB Çıkışı 25V/2.4A
Tip-C Girişi5V/9V/12V
LED El Feneri600 Lümen (El Feneri, SOS, Flaş)
Ürün Boyutları4.5x18x8.5 cm
Ürün Ağırlığı1.13 kilo

10. Garanti ve Destek

The Dyeetic 6000A Portable Car Jump Starter comes with a 36-month hassle-free return policy and lifetime technical support. For any questions, concerns, or technical assistance, please contact our dedicated customer service team. Refer to the contact information provided in your product packaging or visit the official Dyeetic webdestek sitesi.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.