VISLONE 300W Electric Paint Sprayer User Manual

1. Önemli Güvenlik Talimatları

Bu elektrikli aletle birlikte verilen tüm güvenlik uyarılarını, talimatları, çizimleri ve teknik özellikleri okuyun. Aşağıda listelenen tüm talimatlara uyulmaması elektrik çarpmasına, yangına ve/veya ciddi yaralanmaya neden olabilir.

• Çalışma Alanı Güvenliği: Çalışma alanını temiz ve iyi aydınlatılmış tutun. Elektrikli aletleri yanıcı sıvılar, gazlar veya toz gibi patlayıcı ortamlarda çalıştırmayın.
• Elektriksel Güvenlik: Elektrikli aletlerin fişleri prize uygun olmalıdır. Fişte hiçbir şekilde değişiklik yapmayın. Topraklanmış veya topraklanmış yüzeylerle vücut temasından kaçının.
• Kişisel Güvenlik: Always wear eye protection, respiratory protection, and appropriate clothing. Do not overreach. Maintain proper footing and balance at all times.
• Alet Kullanımı ve Bakımı: Elektrikli aleti zorlamayın. Uygulamanız için doğru elektrikli aleti kullanın. Herhangi bir ayarlama yapmadan, aksesuar değiştirmeden veya elektrikli aletleri saklamadan önce fişi prizden çekin.
• Specific Sprayer Safety: Ensure proper ventilation when spraying. Do not spray flammable materials near open flames or ignition sources. Always clean the sprayer thoroughly after each use.

2. Ürün Bittiview ve Paket İçeriği

The VISLONE 300W Electric Paint Sprayer is designed for efficient application of various coatings. Familiarize yourself with its components and ensure all items are present.

Şekil 2.1: Üzeriview of the VISLONE 300W Electric Paint Sprayer.

2.1 Package List:

• 1 x Boya Püskürtme Cihazı
• 2 x Pil (1300mAh)
• 1 x Temizleme Fırçası
• 1 x Temizleme İğnesi
• 4 x Nozzles (Φ1.0mm, 1.8mm, 2.0mm, 2.5mm)
• 3 x Conta
• 1 x Viskozite Ölçme Kabı
• 1 x Kullanım Kılavuzu (bu belge)
• 1 x Şarj Cihazı

3. Kurulum ve Montaj

3.1 Boyanın Hazırlanması

1. Ensure the paint or coating material is suitable for spray application.
2. Use the provided viscosity cup to check the paint's viscosity. Thin the paint with the appropriate solvent (water for latex, mineral spirits for oil-based) until it passes through the viscosity cup within the recommended time (refer to paint manufacturer's instructions).
3. Strain the thinned paint to remove any lumps or debris that could clog the nozzle.

3.2 Püskürtücünün Montajı

1. Attach the paint container (800ml tank) to the sprayer body by screwing it securely.
2. Insert a charged battery into the battery slot at the base of the handle until it clicks into place.

Figure 3.1: The 800ml capacity paint tank attached to the sprayer.

3.3 Selecting and Installing Nozzles

The sprayer includes four copper nozzles of different sizes (Φ1.0mm, 1.8mm, 2.0mm, 2.5mm) for various paint types and project requirements.

1. Choose the appropriate nozzle size for your paint and desired finish. Generally, smaller nozzles are for thinner materials and finer finishes, while larger nozzles are for thicker materials and faster coverage.
2. Unscrew the nozzle cap from the front of the sprayer.
3. Insert the selected nozzle and ensure a gasket is properly seated.
4. Screw the nozzle cap back on securely.

Figure 3.2: The four interchangeable copper nozzles (1.0mm, 1.8mm, 2.0mm, 2.5mm).

3.4 Püskürtme Desenlerinin Ayarlanması

The sprayer offers three spray patterns: horizontal, vertical, and circular. Rotate the air cap to select the desired pattern.

• Yatay: For spraying up and down motions.
• Dikey: For spraying side to side motions.
• Dairesel: For small areas or detailed work.

4. Operasyon

4.1 Powering On and Testing

1. Ensure the sprayer is fully assembled and the paint tank is filled.
2. Point the sprayer at a test surface (e.g., cardboard) and press the trigger to start spraying.
3. Adjust the flow control knob on the sprayer to achieve the desired paint output. The flow rate can be adjusted between 500-800ml/min.

Figure 4.1: Adjusting the flow control and selecting spray patterns (circular, horizontal, vertical).

4.2 Püskürtme Tekniği

• Boyanacak yüzeyle tutarlı bir mesafe (genellikle 6-12 inç) koruyun.
• Püskürtme cihazını düzgün ve eşit hareketlerle, her geçişi yaklaşık %50 oranında üst üste bindirerek uygulayın; bu, homojen bir kaplama sağlamayı garanti eder.
• Release the trigger at the end of each stroke to avoid paint buildup.
• For best results, apply multiple thin coats rather than one thick coat.

Şekil 4.2: Ör.amples of the paint sprayer's application on furniture, walls, cars, and fences.

5. Bakım ve Temizlik

Proper cleaning after each use is essential to ensure the longevity and optimal performance of your paint sprayer.

5.1 Temizlik İçin Sökme

1. Disconnect the battery from the sprayer.
2. Unscrew the paint container and empty any remaining paint.
3. Unscrew the nozzle cap and remove the nozzle and gasket.
4. The front section of the sprayer can be easily detached from the motor housing for thorough cleaning.

Figure 5.1: The sprayer's design allows for easy disassembly for cleaning.

5.2 Temizleme Prosedürü

1. Fill the paint container with the appropriate cleaning solution (water for water-based paints, solvent for oil-based paints).
2. Reattach the container and spray the cleaning solution through the sprayer until it runs clear.
3. Thoroughly clean all disassembled parts (nozzle, gasket, container, suction tube) using the provided cleaning brush and needle.
4. Püskürtme cihazının dış yüzeyini bir temizleyici ile silin.amp Kumaş.
5. Allow all parts to dry completely before reassembly or storage.

5.3 Depolama

Store the clean, dry sprayer in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the battery is removed if storing for extended periods.

6. Sorun Giderme

7. Özellikler

Figure 7.1: Dimensions of the VISLONE 300W Electric Paint Sprayer.

8. Garanti ve Destek

For warranty information or technical support, please refer to the contact details provided by your retailer or visit the official VISLONE webSite. Satın alma belgeniz olarak satın alma fişinizi saklayın.

Ziyaret edebilirsiniz VISLONE Store on Amazon Daha fazla bilgi için.