Andeman EP-177
Andeman 4000A Jump Starter with 150PSI Air Compressor, Model EP-177 User Manual
Comprehensive instructions for operating and maintaining your Andeman EP-177 device.
1. Giriş
This manual provides essential information for the safe and effective use of your Andeman EP-177 4000A Jump Starter with 150PSI Air Compressor. Please read all instructions carefully before operation and retain this manual for future reference.

Image 1.1: Andeman EP-177 Jump Starter with Air Compressor and included accessories.
2. Kutuda Neler Var?
Paketin tüm bileşenlerinin mevcut olduğunu doğrulayın:
- Epower-177 Jump Starter x1
- Gas Needle x1
- Gas Nozzle x2
- Kullanıcı Kılavuzu x1
- Takviye Kablosu x1
- Inflatable Tube x1
- Saklama Çantası x1
- Şarj Kablosu x1

Image 2.1: All items included in the Andeman EP-177 product package.
3. Ürün Özellikleri
The Andeman EP-177 combines multiple functionalities for automotive and portable power needs:
- 4000A Tepe Akımlı Akü Takviye Cihazı: Capable of starting 12V vehicles with up to 8.5L gas or 7L diesel engines.
- 150PSI Air Compressor: Integrated portable inflator for tires, sports equipment, and other inflatables.
- 24000mAh Power Bank: High-capacity battery with Type-C Quick Charge and USB-A/USB-B outputs for charging electronic devices.
- Multi-Mode LED Light: Features standard illumination, SOS, and alert modes for various situations.
- 10 Güvenlik Önlemi: Advanced safety features including overload, spark, reverse polarity, and over-temperature protection.

Image 3.1: The Andeman EP-177 functioning as both a jump starter and a tire inflator.
4. Özellikler
| Özellik | Şartname |
|---|---|
| Marka | Andeman |
| Örnek | Epower-177 |
| Tepe Çıkış Akımı | 4000 Amps |
| Pil Kapasitesi | 24000mAh |
| Motor Uyumluluğu | 8.5 L'ye Kadar Benzin / 7 L Dizel |
| Hava Kompresörü Basıncı | Up to 150PSI |
| Şarj Girişi (Tip-C) | 5V/3A, 9V/2A, 12V/1.5A |
| USB-A Çıkışı | QC3.0 |
| USB-B Çıkışı | 5V/3A |
| DC Çıkış | 15V |
| Ürün Boyutları | 1.97"D x 4.33"G x 7.68"Y |
| Ürün Ağırlığı | 2.86 pound |
| Pil Türü | Lityum İyon |
5. Kurulum
5.1 İlk Şarj
Before first use, fully charge the Andeman EP-177. Connect the provided charging cable to the Type-C input port on the device and to a suitable USB power adapter (not included). The device supports fast charging, reaching full capacity in approximately 1.8 hours. A 10-minute charge can provide enough power for an emergency jump start.

Image 5.1: Charging the Andeman EP-177 via its Type-C port.
5.2 Pil Seviyesini Kontrol Etme
The device features a digital display indicating the battery power percentage. Ensure the device is adequately charged before use, especially for jump-starting vehicles.
6. Kullanım Talimatları
6.1 Aracın Takviyeyle Çalıştırılması
- Adım 1: Insert the jumper cable into the jump starter's port. Ensure a secure connection.
- Adım 2: Kırmızı cl'yi bağlayınamp to the vehicle's positive (+) battery terminal and the black clamp aracın negatif (-) akü terminaline.
- Adım 3: Once the green indicator light on the jumper cable connector illuminates, start the vehicle.
- Adım 4: Araç çalıştıktan sonra, bağlantı kablosunu çıkarın.amps from the vehicle battery within 30 seconds, then disconnect the cable from the jump starter.

Resim 6.1: Araç akü takviyesi için adım adım kılavuz.
6.2 Hava Kompresörünün Kullanımı
- Adım 1: Press and hold the power button for 2 seconds to turn on the device. Short press to switch between on/pause.
- Adım 2: Choose the appropriate nozzle/needle and connect it to the inflatable tube, then attach to the item to be inflated.
- Adım 3: Short press the mode button to select the desired inflation mode (car, motorcycle, bicycle, ball). Use the "+" or "-" buttons to adjust the target pressure.
- Adım 4: Start inflation by short pressing the power button. The pump will stop automatically at the set pressure or when paused manually.
Not: For continuous use, allow the compressor to rest for 10 minutes after every 10 minutes of operation to prevent overheating.

Image 6.2: The Andeman EP-177 functioning as a tire inflator.
6.3 Taşınabilir Şarj Cihazı Olarak Kullanımı
The device can charge various electronic devices via its USB-A (QC3.0), USB-B (5V/3A), and Type-C (5V/3A, 9V/2A, 12V/1.5A) output ports. Connect your device using a compatible charging cable.

Image 6.3: The Andeman EP-177 used as a power bank to charge various devices.
6.4 LED El Fenerinin Kullanımı
The integrated LED light offers three modes:
- Standard Lighting: Sürekli aydınlatma sağlar.
- Acil Durum Modu: Acil durumlarda SOS sinyali gönderir.
- Uyarı Modu: Flashing light for increased visibility.
To activate or cycle through modes, press the dedicated flashlight button on the device.

Image 6.4: The Andeman EP-177's LED flashlight in use.
7. Güvenlik Önlemleri
Yaralanmayı veya cihaza zarar gelmesini önlemek için aşağıdaki güvenlik kurallarına uyun:
- Do not short-circuit the jump starter terminals.
- Cihazı aşırı sıcaklıklara (-20°C'nin altında veya 60°C'nin üstünde) maruz bırakmayın.
- Cihazı sökmeyin.
- Çocukların erişemeyeceği yerde saklayınız.
- Ensure proper polarity when connecting to a vehicle battery (red to positive, black to negative).
- Remove jumper cables within 30 seconds after the vehicle starts.
- Avoid prolonged continuous use of the air compressor to prevent overheating.

Resim 7.1: Üzeriview of the 10 safety protections.
8. Bakım
- Cihazı doğrudan güneş ışığından uzak, serin ve kuru bir yerde saklayın.
- Charge the device at least once every 3-6 months to maintain battery health, even if not in use.
- Dış yüzeyi yumuşak, damp bez. Sert kimyasallar veya aşındırıcı temizleyiciler kullanmayın.
- Tüm portların toz ve kalıntılardan arındırılmış olduğundan emin olun.
9. Sorun Giderme
- Cihaz açılmıyor:
- Ensure the device is charged. Connect it to a power source and allow it to charge for a period.
- Vehicle does not start after jump-starting:
- Check battery connections for proper polarity and secure contact. Ensure the jump starter has sufficient charge. The vehicle battery may be severely damaged or the vehicle may have other mechanical issues.
- Air compressor is not inflating:
- Verify that the nozzle is correctly attached and the target pressure is set. Check the device's battery level. Ensure the power button has been pressed to start inflation.
- Device is overheating:
- Stop operation immediately and allow the device to cool down. This is particularly important for the air compressor after extended use.
10. Garanti ve Destek
For warranty information and customer support, please refer to the contact details provided in your product packaging or visit the official Andeman webSite. Satın alma fişinizi, garanti talepleriniz için satın alma belgeniz olarak saklayın.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.