Andeman 4000A Jump Starter (Model EP-166) User Manual

1. Giriş

Thank you for choosing the Andeman 4000A Jump Starter, Model EP-166. This device is designed to provide reliable power for jump-starting vehicles and charging electronic devices. Please read this manual thoroughly before use to ensure safe and optimal operation.

1.1. Kutuda Neler Var?

• Epower-166 Jump Starter Unit x1
• Akıllı Clampx1
• Type-C Şarj Kablosu x1
• Kullanıcı Kılavuzu x1
• Saklama Kutusu x1

Image: All components included in the Andeman Jump Starter package, laid out for clear visibility.

2. Güvenlik Önlemleri

Your safety is paramount. This device incorporates advanced safety features, but proper handling is crucial. The Andeman EP-166 is UL Certified, ensuring it meets stringent safety standards.

2.1. Integrated Safety Protections

The intelligent safety terminals feature 10 advanced protections:

• Aşırı Yük Koruması
• Kıvılcım Koruması
• Ters Şarj Koruması
• Ters Polarite Koruması
• Aşırı Akım Koruması
• Düşük Sıcaklık Koruması
• Aşırı Şarj Koruması
• Kısa Devre Koruması
• Aşırı Hacimtage Koruma
• Yüksek Sıcaklık Koruması

Resim: Dahili view highlighting the 10 advanced safety protections integrated into the Andeman Jump Starter for secure operation.

2.2. Çevresel Hususlar

• Sıcaklık Aralığı: The device is engineered to operate in extreme temperatures, from -20°C (-4°F) to 60°C (140°F).
• Su Geçirmezlik Derecesi: With an IP65 waterproof rating, the unit is resistant to rain and splashes. Avoid submerging the device in water.
• Dayanıklılık: The design is drop-proof and sand-proof for enhanced durability in various environments.

3. Kurulum

3.1. Atlama Marşını Şarj Etme

Before initial use, fully charge the jump starter. It features Type-C 3.0A Quick Charging technology, allowing a full charge from 0% to 100% in approximately 1.8 hours. Each complete charge provides up to 80 jump-starts.

• Connect the provided Type-C charging cable to the jump starter's input port.
• Kablo ucunu uygun bir USB güç adaptörüne bağlayın (adaptör pakete dahil değildir).
• LED ekran şarj işleminin ilerlemesini gösterecektir.

Image: The jump starter being fast-charged via its Type-C port inside a vehicle, showing its quick recharge capability.

4. Kullanım Talimatları

4.1. Aracı Çalıştırma

1. Akü takviye cihazının yeterince şarj edilmiş olduğundan emin olun.
2. Akıllı cl'yi takınamps cable into the jump starter's dedicated port.
3. Kırmızı (+) cl'yi bağlayınamp Aracın aküsünün pozitif kutbuna.
4. Siyah (-) cl'yi bağlayınamp Aracın aküsünün negatif kutbuna.
5. Akıllı saatin üzerindeki gösterge ışığını kontrol edin.amps. A solid green light indicates it's safe to proceed. If it flashes red or beeps, refer to the troubleshooting section.
6. Aracın motorunu çalıştırın.
7. Once the vehicle starts, remove the smart clamps from the vehicle battery within 30 seconds.
8. Akıllı bağlantıyı kesin.amps cable from the jump starter.

Image: The Andeman Jump Starter connected to a car battery, illustrating the ease of use for jump-starting a vehicle.

4.2. Power Bank Olarak Kullanımı

The 20000mAh capacity allows the jump starter to function as a power bank for various electronic devices.

• Connect your device's charging cable to one of the available USB output ports (USB-A: 2.1A; 5V/9V/12V or USB-B: 3A; 5V/2.1A).
• The dedicated Type-C port can also charge laptops at speeds comparable to their original adapters.
• LED ekran kalan pil yüzdesini gösterecektir.tage.

Image: The 20000mAh power bank feature in action, charging a laptop, smartphone, tablet, headphones, and smartwatch.

4.3. LED El Fenerinin Kullanımı

The built-in ultra-bright LED flashlight offers three lighting modes:

• El feneri: For general illumination (e.g., inspecting an engine, changing a tire).
• S.O.S: A life-saving signal light for emergencies.
• Strobe: A traffic warning light to alert oncoming traffic.

To activate and cycle through the modes, press the dedicated flashlight button on the unit.

Image: Illustration of the three versatile LED lighting modes: standard flashlight, SOS signal, and strobe, useful for various emergencies.

5. Bakım

5.1. Şarj ve Depolama

• Recharge the jump starter every 3-6 months if it is not in regular use to maintain battery health.
• Store the device in its protective storage box in a cool, dry place, away from direct sunlight and extreme temperatures.

6. Sorun Giderme

akıllı clamps provide visual and audible feedback to help diagnose common issues:

7. Özellikler

8. Resmi Ürün Videoları

9. Garanti ve Destek

For detailed warranty information and customer support, please refer to the user manual included in your product package. You may also contact Andeman customer service directly via email: andeman@andeman.com.