Radiomaster Pocket Hall Gimbal Transmitter Remote Control Manual

giriiş

The Radiomaster Pocket is a compact and lightweight remote control transmitter designed for various RC applications. It features Hall gimbals, a foldable antenna, and is available in different versions, including CC2500 and ExpressLRS. This manual provides essential information for setting up, operating, and maintaining your Radiomaster Pocket.

Kutuda Neler Var?

Aşağıda listelenen tüm öğelerin paketinizde bulunduğunu doğrulayın:

• 1 x Pocket Radio
• 1 x Custom Carry Pouch
• 1 x USB-C Kablosu
• 1 x Ekran Koruyucu
• 1 x Çıkartma
• 1 x Kılavuz (bu belge)
• 4 x Low Tension Springs (for gimbals)

Ürün Bittiview

The Radiomaster Pocket is designed for portability and performance. Key features include:

• Hall Etkili Gimballar: For smooth centering and precise response.
• Dahili LED Işıklar: To visualize your inputs.
• Taşınabilir ve Hafif Tasarım: Taşınması ve depolanması kolaydır.
• Foldable Antenna: Enhances portability.
• Removable Stick Ends: For customization and compact storage.
• Arkadan Aydınlatmalı LCD Ekran: Offers a clear balance of size and functionality.
• Harici Modül Yuvası: Compatible with RadioMaster Nano-size modules and TBS Nano Crossfire/Nano Tracer.
• 18650 Battery Compatibility: Provides extended battery life (batteries not included).
• Pre-installed EdgeTX Firmware: Ready for advanced customization and control.

Kurmak

1. Pil Kurulumu

The Radiomaster Pocket requires two 18650 batteries (not included). To install:

1. Vericinin arka tarafında bulunan pil bölmesini bulun.
2. Bölme kapağını açın.
3. İki adet 18650 pilini doğru kutuplara dikkat ederek takın.
4. Pil bölmesi kapağını sıkıca kapatın.

2. İlk Güç Açma

Press and hold the power button located on the front of the transmitter until the screen illuminates and the EdgeTX firmware loads. The transmitter will perform a self-check upon startup.

3. Antenna and Stick Ends

• Anten: Unfold the antenna to its upright position for optimal signal transmission. Fold it down for storage.
• Stick Ends: The transmitter comes with removable stick ends. You can customize them or remove them for more compact storage.

Kullanım Talimatları

1. Temel Kontroller

Ana kontrolleri öğrenin:

• Gimballer: Control primary flight surfaces (throttle, rudder, aileron, elevator).
• Trim Düğmeleri: Kanal çıkışlarının ince ayarı için kullanılır.
• Yön tuşları: For menu navigation on the LCD screen.
• Güç Düğmesi: Turns the unit on/off and can be used for menu selection.

2. Gimbal Ayarı

The gimbals can be adjusted for tension and self-centering. Refer to Figure 7 for adjustment points:

• A (I-R): Turn clockwise to disable self-centering (throttle). Turn counter-clockwise to enable self-centering (throttle).
• B (T): To adjust the throttle stick tension. Turn clockwise to increase stick tension. Turn counter-clockwise to decrease stick tension.
• C (UP-DOWN): Turn clockwise to increase vertical stick tension. Turn counter-clockwise to decrease stick tension.
• D (LEFT-RIGHT): Turn clockwise to increase horizontal stick tension. Turn counter-clockwise to decrease stick tension.

Özellikler

Bakım

• Temizlik: Use a soft, dry cloth to clean the exterior of the transmitter. Avoid using harsh chemicals or solvents.
• Depolamak: Vericiyi serin, kuru bir yerde, doğrudan güneş ışığından ve aşırı sıcaklıklardan uzakta saklayın. Uzun süre saklayacaksanız pilleri çıkarın.
• Donanım Yazılımı Güncellemeleri: Periodically check the official Radiomaster webEn iyi performansı ve yeni özelliklere erişimi garantilemek için yazılım güncellemeleri için site.

Sorun giderme

Yaygın Sorunlar ve Çözümleri:

• Verici açılmıyor:
  • Pillerin doğru şekilde takıldığından ve tam şarjlı olduğundan emin olun.
  • Pil polaritesini kontrol edin.
• No signal to receiver:
  • Verify the antenna is unfolded and in an upright position.
  • Ensure the transmitter and receiver are properly bound. Refer to your receiver's manual for binding instructions.
  • Diğer 2.4GHz cihazlardan kaynaklanan parazit olup olmadığını kontrol edin.
• Gimbal response issues:
  • Check gimbal tension settings as described in the "Gimbal Adjustment" section.
  • Calibrate gimbals through the EdgeTX firmware settings if necessary.

For further assistance, please refer to the official Radiomaster support resources or community forums.

Önemli Güvenlik Bilgileri

• Always operate your RC equipment responsibly and in accordance with local laws and regulations.
• Ensure your batteries are in good condition and charged properly.
• Never operate your RC model near people, animals, or property that could be damaged.
• Perform pre-flight checks before each use to ensure all controls are functioning correctly.
• Keep the transmitter away from water and moisture, as it is not water resistant.

Garanti ve Destek

For information regarding warranty coverage, technical support, or service, please visit the official Radiomaster webYetkili satıcınızla iletişime geçin veya siteyi ziyaret edin. Satın alma belgenizi garanti talepleriniz için saklayın.