SEEIRIR SVP-688W-B Tuya 63A Wi-Fi Smart Voltage Koruyucu Kullanım Kılavuzu

1. Giriş

The SEEIRIR SVP-688W-B is a sophisticated Wi-Fi enabled smart protector designed for electrical circuits. It integrates earth leakage protection, over/under voltage protection, over current protection, and energy metering functionalities into a single device. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your SVP-688W-B protector.

Temel Özellikler:

• Intelligent Power-Off Protection: Automatically identifies circuit abnormalities and cuts off power to prevent equipment damage.
• Multi-functional Applicability: Suitable for various scenarios including home, office, and factory environments, offering strong compatibility.
• Yüksek Dayanıklılık: Constructed with wear-resistant and high-temperature resistant materials, ensuring long-term stable operation.
• Kullanıcı Dostu Tasarım: Simple structure, easy installation, and straightforward operation.
• Güvenlik Uyumluluğu: Certified through international electrical safety standards, guaranteeing quality and peace of mind.

2. Güvenlik Bilgileri

Kurulum ve çalıştırmadan önce lütfen tüm güvenlik uyarılarını ve talimatlarını dikkatlice okuyun. Bu talimatlara uyulmaması elektrik çarpmasına, yangına veya ciddi yaralanmaya neden olabilir.

• Profesyonel Kurulum: Kurulum ve kablolama işlemleri yalnızca kalifiye bir elektrikçi tarafından yapılmalıdır.
• Güç Bağlantısının Kesilmesi: Always disconnect the main power supply before installing, wiring, or performing any maintenance on the device.
• Doğru Kablolama: Ensure all wiring connections are correct, secure, and comply with local electrical codes. Pay attention to Neutral (N) and Live (L) terminals.
• Çevresel Koşullar: Do not expose the device to moisture, water, direct sunlight, or extreme temperatures.
• Kullanım Amacı: Use the device only for its intended purpose as an electrical protector and energy meter.

3. Ürün Bittiview

The SVP-688W-B features a clear LCD display and intuitive controls for easy monitoring and configuration. Below are the main components and their descriptions.

Şekil 3.1: Ön view of the SVP-688W-B, highlighting the LCD display, 'SET', 'Up', 'Wi-Fi', and 'Power' buttons, and various status indicators.

Şekil 3.2: Açılı view of the SVP-688W-B, illustrating the input (IN) and output (OUT) terminals for neutral (N) and live (L) wire connections.

Bileşenler:

• LCD Ekran: Gerçek zamanlı vol gösterirtage (V), current (A), power (kW), energy consumption (kWh), and leakage current (mA).
• Ayarlama düğmesi: Used to enter/exit the settings menu and confirm selections.
• Yukarı/Aşağı Düğmeleri: Used to navigate through menu options and adjust parameter values.
• Wi-Fi Düğmesi: Initiates Wi-Fi pairing mode for connection to the Tuya Smart app.
• Güç Düğmesi: Manually turns the output ON or OFF.
• Gösterge Işıkları: PULSE (energy pulse), WIFI (Wi-Fi status), V (voltage status), A (current status), LEAKAGE (earth leakage status).
• IN Terminalleri (K, L): For connecting the incoming power supply.
• ÇIKIŞ Terminalleri (K, L): For connecting the load (appliances/circuit).

4. Kurulum ve Kurulum

Follow these steps for proper installation and initial setup of your SVP-688W-B protector.

4.1 Mekanik Tesisat:

1. Montaj: Securely mount the SVP-688W-B device onto a standard 35mm DIN rail within your electrical panel.

4.2 Elektrik Tesisatı:

1. Gücü Kesin: Ensure the main power supply to the circuit is completely disconnected before proceeding with any wiring.
2. Giriş Kablolaması: Connect the incoming neutral wire to the 'N' terminal under 'IN' and the incoming live wire to the 'L' terminal under 'IN'.
3. Çıkış Kablolaması: Connect the outgoing neutral wire to the 'N' terminal under 'OUT' and the outgoing live wire to the 'L' terminal under 'OUT'.
4. Güvenli Bağlantılar: Gevşek bağlantıları önlemek ve aşırı ısınmaya veya arızaya yol açabilecek durumları engellemek için tüm terminal vidalarını sıkıca sıkın.
5. Doğrulamak: Tüm kablolamaların doğru polaritede ve güvenli bağlantılarda olduğundan emin olmak için iki kez kontrol edin.

4.3 Wi-Fi Connection (Tuya Smart App):

1. İndir uygulaması: Download and install the 'Tuya Smart' or 'Smart Life' app from your smartphone's app store (iOS or Android).
2. Kayıt Ol/Giriş Yap: Uygulamayı açın ve yeni bir hesap oluşturun veya halihazırda bir hesabınız varsa giriş yapın.
3. Cihazı Açın: Restore power to the circuit. The device display should light up.
4. Eşleştirme Moduna Girin: Press and hold the 'WIFI' button on the device for 5-7 seconds until the Wi-Fi indicator light starts blinking rapidly. This indicates pairing mode.
5. Uygulamaya Cihaz Ekle: In the Tuya Smart app, tap the '+' icon (usually in the top right corner) to add a new device. Select 'Electrical Engineering' > 'Circuit Breaker (Wi-Fi)' or 'Power Monitor (Wi-Fi)'.
6. Wi-Fi'ye bağlanın: Follow the on-screen instructions in the app to connect the device to your 2.4GHz Wi-Fi network. Enter your Wi-Fi password when prompted.
7. Tamamlama: Once connected, the Wi-Fi indicator on the device will stop blinking and remain solid. You can now control and monitor the device via the app.

5. Kullanım Talimatları

This section details how to operate your SVP-688W-B protector using both the device buttons and the Tuya Smart app.

5.1 Device Display and Buttons:

• Gerçek zamanlı izleme: The LCD display cycles through real-time readings of Voltage (V), Current (A), Power (kW), Energy Consumption (kWh), and Leakage Current (mA).
• Güç AÇIK/KAPALI: Basın Güç button to manually switch the output ON or OFF.
• Erişim Ayarları: Basın AYARLAMAK button to enter the settings menu. Use the Up Ve Aşağı buttons to navigate and adjust values. Press AYARLAMAK Onaylamak ve çıkmak için tekrar tuşuna basın.

5.2 Tuya Smart App Control:

Once connected to the Tuya Smart app, you can access advanced features:

• Uzaktan kumanda: Turn the device ON/OFF remotely from anywhere with an internet connection.
• Gerçek Zamanlı Veriler: View canlı cilttage, current, power, and energy consumption data on your smartphone.
• Protection Parameter Settings:
• Aşırı Hacimtage Koruma (OVP): İzin verilen maksimum hacmi ayarlayın.tage. If exceeded, the device will trip.
• Hacim Altındatage Koruma (UVP): İzin verilen minimum hacmi ayarlayın.tage. Eğer cilttage değeri bunun altına düştüğünde, cihaz devre dışı kalacaktır.
• Aşırı Akım Koruması (OCP): Set the maximum allowable current. If exceeded, the device will trip.
• Earth Leakage Protection (ELP): Set the maximum allowable leakage current. If exceeded, the device will trip.
• Reconnection Delay: Configure the delay time before the device automatically reconnects after a protection trip.
• Enerji İstatistikleri: Monitor daily, monthly, and total energy consumption.
• Zamanlayıcı/Program: Set schedules for automatic ON/OFF operations.
• Sahne Otomasyonu: Integrate with other Tuya-compatible smart devices for automated scenarios.

6. Bakım

To ensure the longevity and optimal performance of your SVP-688W-B protector, follow these maintenance guidelines:

• Periyodik muayene: Regularly inspect the device and its wiring connections for any signs of damage, loose terminals, or discoloration. Address any issues promptly.
• Temizlik: Keep the device clean and free from dust and debris. Use a dry, soft cloth for cleaning. Do not use liquid cleaners or solvents.
• Donanım Yazılımı Güncellemeleri: Check the Tuya Smart app periodically for available firmware updates. Keeping the firmware updated ensures you have the latest features and security enhancements.
• Çevre Kontrolü: Çalışma ortamının belirtilen sıcaklık ve nem aralıklarında kalmasını sağlayın.

7. Sorun Giderme

If you encounter issues with your SVP-688W-B protector, refer to the following troubleshooting tips:

• Device Not Powering On / No Display:
  • Devreye giden ana güç kaynağını kontrol edin.
  • Verify that the input wires (IN N, IN L) are correctly and securely connected.
• Wi-Fi Bağlantısı Başarısız:
  • Wi-Fi ağınızın 2.4 GHz olduğundan emin olun. Cihaz 5 GHz Wi-Fi'yi desteklemiyor.
  • Make sure the device is in pairing mode (Wi-Fi indicator blinking rapidly). If not, press and hold the Wi-Fi button.
  • Wi-Fi şifrenizin doğruluğunu kontrol edin.
  • Move the device closer to your Wi-Fi router if signal strength is weak.
  • Wi-Fi yönlendiricinizi yeniden başlatın ve tekrar eşleştirmeyi deneyin.
• Device Trips Frequently:
  • Aşırı Hacimtage/Düşük Cilttage: Check the actual grid voltage. Adjust OVP/UVP thresholds in the app if they are set too sensitively for your power supply.
  • Aşırı Akım: Check the total load connected to the device. Ensure it does not exceed the 63A rating. Reduce load or adjust OCP settings if necessary.
  • Toprak Kaçağı: Disconnect loads one by one to identify the faulty appliance causing the leakage. If no faulty appliance is found, consult an electrician to check your wiring for insulation issues.
  • Ensure the reconnection delay is set appropriately to avoid immediate re-tripping.
• Yanlış Okumalar:
  • Verify all wiring connections are tight and correct.
  • Ensure the device is installed correctly according to the wiring diagram.

8. Özellikler

9. Garanti ve Destek

Garanti Bilgileri: This product comes with a standard manufacturer's warranty. Please refer to your purchase receipt, product packaging, or contact the seller directly for specific warranty terms, duration, and conditions.

Teknik Destek: For technical assistance, troubleshooting, or further inquiries regarding the SEEIRIR SVP-688W-B Wi-Fi Smart Voltage Protector, please contact SEEIRIR customer support through your retailer or the official brand channels. Provide your product model number (SVP-688W-B) and a detailed description of the issue when seeking support.