giriiş
This manual provides detailed instructions for the JZK Voice Remote Control, designed as a replacement or secondary remote for NVIDIA Shield TV Pro models from 2015, 2017, and 2019. This remote features voice search capabilities and an ergonomic design for comfortable use. Please read this manual thoroughly before operating your device.
Paket İçeriği
Paketinizde tüm öğelerin mevcut olduğundan emin olun:
- 1 x JZK Voice Remote Control
- 1 x Kullanıcı Kılavuzu (Bu belge)
Note: 2x AAA batteries are required and are not included in the package.
Image: Contents of the JZK remote control package, including the remote and a small user guide.
Kurmak
1. Pil Kurulumu
- Uzaktan kumandanın arkasındaki pil bölmesini bulun.
- Pil kapağını açmak için aşağı doğru kaydırın.
- Bölmenin içinde belirtildiği gibi doğru kutuplara (+ ve -) dikkat ederek iki (2) adet AAA pil takın.
- Pil kapağını güvenli bir şekilde yerine oturana kadar yerine kaydırın.
Image: The remote control with its battery cover removed, illustrating where to insert two AAA batteries.
2. Uzaktan Kumandayı Eşleştirme
The remote control uses an infrared connection. For initial setup or re-pairing, follow these steps:
- Ensure your NVIDIA Shield TV is powered on and within 1 foot (approx. 30 cm) of the remote control.
- On your NVIDIA Shield TV, navigate to Settings > Device Preferences > Remotes & Accessories.
- Basılı tutun Geri düğme ve Ev button simultaneously on the JZK remote control until the remote's indicator light begins to flash.
- The NVIDIA Shield TV should detect the new remote. Select it from the list of available devices to complete the pairing process.
- Once paired, the remote's light will stop flashing, and you can begin using it.
If pairing fails, ensure the batteries are correctly installed and charged, and try the process again. You may also need to restart your NVIDIA Shield TV.
Kullanım Talimatları
Düğmeleri ve işlevlerini öğrenin:
Image: Detailed button layout of the JZK remote control with labels for each function.
| HAYIR. | Düğme | İşlev |
|---|---|---|
| 1 | Dahili Mikrofon | Used for Voice Search commands. |
| 2 | Güç | Turns the NVIDIA Shield TV on or off. |
| 3 | Ayarlar | Accesses the NVIDIA Shield TV settings menu. (Customizable in Settings > Devices & Accessories > Customize Settings button) |
| 4 | Navigasyon Halkası | Navigates menus: Up, Down, Right, Left. |
| 5 | Select (OK) | Confirms selections or opens items. |
| 6 | Geri | Önceki ekrana veya menüye döner. |
| 7 | Ev | Ana ekrana döner. |
| 8 | Hızlı İleri | Skips forward in media playback. |
| 9 | Oynat/Duraklat | Medya oynatımını başlatır veya duraklatır. |
| 10 | Geri sarma | Skips backward in media playback. |
| 11 | Sesli Arama | Activates voice command input. Press and hold, then speak your command. |
| 12 | Hacmi Artırın | Sesi yükseltir. |
| 13 | Sesi Azalt | Sesi azaltır. |
| 14 | Netflix'i açın | Directly launches the Netflix application. |
Using Voice Search
The voice search feature allows for quick navigation and content discovery. To use it:
- Basılı tutun Sesli Arama düğme (11).
- Speak your command clearly into the built-in microphone (1). For example, say "Open YouTube," "Find action movies," or "Adjust volume."
- Serbest bırak Sesli Arama button when you are finished speaking.
Bakım
Uzaktan Kumandayı Temizleme
Uzaktan kumandayı temizlemek için yumuşak, kuru bir bez kullanın. İnatçı kirler için hafifçe kurulayın.ampen the cloth with water or a mild, non-abrasive cleaner. Avoid using harsh chemicals or solvents, as these can damage the remote's surface or internal components.
Pil Değişimi
When the remote's performance degrades or it becomes unresponsive, it's time to replace the batteries. Follow the battery installation steps outlined in the Kurmak section. Always replace both AAA batteries at the same time with new ones.
Sorun giderme
If you encounter issues with your JZK Voice Remote Control, refer to the following common problems and solutions:
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Uzaktan kumanda yanıt vermiyor. | Low or dead batteries. Incorrect battery installation. Remote not paired. Obstruction between remote and Shield TV. | Replace batteries. Check battery polarity. Re-pair the remote (see Setup section). Ensure clear line of sight to Shield TV. |
| Voice Search not working. | Microphone blocked. Remote not properly paired for voice functions. Software glitch. | Ensure microphone is clear. Re-pair the remote. Restart NVIDIA Shield TV. |
| Buttons are sticky or not registering presses. | Düğmelerin altında kir veya kalıntı var. | Clean the remote (see Maintenance section). |
| Remote disconnects frequently. | Interference. Low batteries. | Ensure no strong interference sources nearby. Replace batteries. Re-pair the remote. |
Özellikler
| Özellik | Detay |
|---|---|
| Marka | JZK |
| Model Uyumluluğu | NVIDIA Shield TV Pro (2015, 2017, 2019 models), NVIDIA Shield TV Cube (2019) |
| Bağlantı Türü | Kızılötesi (IR) |
| Güç Kaynağı | 2 adet AAA alkalin pil (dahil değildir) |
| Özel Özellikler | Voice Search, Ergonomic Design, Dedicated Netflix Button |
| Malzeme | Dayanıklı ABS |
| Renk | Siyah / Beyaz |
| Boyutlar (U x G x Y) | Yaklaşık 16.8 x 6 x 2.6 cm (6.6 x 2.4 x 1.0 inç) |
| Ağırlık | Yaklaşık 60 gram (2.1 ons) |
Image: Dimensions of the JZK remote control, indicating its length, width, and thickness.
Image: The JZK remote control held in a hand, highlighting its comfortable and ergonomic design.
Garanti Bilgileri
Specific warranty details for this JZK product are not provided in the product description. Please refer to the retailer's return policy or contact JZK customer support for information regarding warranty coverage and terms.
Destek
For further assistance, troubleshooting, or inquiries about your JZK Voice Remote Control, please contact the retailer where you purchased the product or refer to the official JZK webMüşteri destek seçenekleri için site.