giriiş
This manual provides essential information for the safe and effective use of your KERDE 08 Smart Electric Bidet Toilet Seat. Please read these instructions thoroughly before installation and operation, and retain them for future reference. This bidet seat offers enhanced hygiene and comfort features, including a heated seat, warm water wash, and warm air dryer.
Güvenlik Bilgileri
Yaralanmaları veya ürüne zarar gelmesini önlemek için aşağıdaki güvenlik önlemlerine uyun:
- Ensure the product is connected to a grounded 110V-120V power outlet.
- Do not immerse the bidet seat or its electrical components in water.
- Bide klozetinin oturma yerinde aşındırıcı temizleyiciler veya sert kimyasallar kullanmaktan kaçının.
- Keep children and individuals with reduced physical, sensory, or mental capabilities away from the bidet seat unless supervised.
- Herhangi bir bakım veya temizlik işlemine başlamadan önce su kaynağını kapatın ve cihazın fişini çekin.
- Üniteyi kendiniz onarmaya veya değiştirmeye çalışmayın. Yetkili servis personeliyle iletişime geçin.
Paket İçeriği
Kuruluma başlamadan önce tüm bileşenlerin mevcut olduğundan emin olun:
- KERDE 08 Smart Electric Bidet Toilet Seat
- Montaj Donanımı
- Bide Hortumu
- Kullanıcı Kılavuzu
Ürün Bittiview
The KERDE 08 Smart Electric Bidet Toilet Seat integrates various features for a comfortable and hygienic experience. Key components include the main bidet unit, control panel, and nozzle system.
Figure 1: Main Components of the Bidet Seat
The armrest-mounted control panel provides easy access to all functions. The stainless steel nozzle offers multiple cleaning modes, and the seat features integrated heating and a soft-close lid.
Figure 2: Armrest Control Panel
Figure 3: Nozzle Functions
Figure 4: Heated Seat Feature
Şekil 5: Sıcak Hava Kurutma Fonksiyonu
Figure 6: LED Night Light for Nighttime Use
Kurulum
Before installation, ensure your toilet is an elongated type and meets the size requirements. The product requires a household water supply connection, a 3-inch power cord, and a 110V-120V three-hole socket.
Figure 7: Toilet Size Compatibility Check
Adım Adım Kurulum Kılavuzu:
- Tuvaleti Hazırlayın: Turn off the water supply to your toilet and flush to empty the tank. Disconnect the existing water supply hose from the toilet tank.
- Install the T-Valve: Connect the provided T-valve to the toilet's water inlet. Reconnect the toilet's water supply hose to the T-valve.
- Bide hortumunu bağlayın: Attach the bidet hose from the T-valve to the bidet seat's water inlet. Ensure a secure connection.
- Montaj plakasını takın: Remove the existing toilet seat. Place the bidet seat's mounting plate over the toilet bowl holes, aligning it correctly. Insert the rubber expansion nuts into the toilet holes and secure the mounting bolts through the plate. Tighten the bolts to firmly secure the plate.
- Attach the Bidet Seat: Bide kapağını yerine oturana kadar montaj plakasına kaydırın.
- Gücü bağlayın: Plug the bidet seat's power cord into a grounded 110V-120V electrical outlet.
- Su Teminini Geri Kazandırın: Tuvalete giden suyu yavaşça açın. Herhangi bir sızıntı olup olmadığını kontrol edin.
- Test İşlevselliği: Once installed, test all functions of the bidet seat as described in the Operation section.
Video 1: Installation and Functionality Test of the KERDE 08 Smart Electric Bidet Toilet Seat. This video demonstrates the process of connecting the water supply, installing the mounting plate, attaching the bidet seat, and testing various wash and dry functions.
Figure 8: Water Connection Diagram
Operasyon
The KERDE 08 bidet seat is operated via the armrest-mounted control panel. Ensure the unit is powered on and the water supply is open.
Kontrol Paneli Fonksiyonları:
Figure 9: Armrest Control Panel Layout
- Güç: Üniteyi açmak veya kapatmak için basın.
- Buttocks Clean: Initiates a posterior wash with warm water. Adjust water pressure and nozzle position as desired.
- Female Clean: Initiates a gentle feminine wash with warm water. Adjust water pressure and nozzle position as desired.
- Sıcak Hava Kurutucu: Activates the warm air dryer after washing. Adjust air temperature as desired.
- Kendi Kendini Temizleme: The nozzle performs an automatic self-cleaning cycle before and after each use. A dedicated button can also initiate this.
- Masaj: Provides a pulsating water spray for a massage effect during washing.
- Aydınlatma: Toggles the soft LED night light on or off.
- Enerji Tasarrufu: Activates an energy-saving mode to reduce power consumption when idle.
- Su sıcaklığı: Adjusts the temperature of the wash water (Low, High).
- Rüzgar Sıcaklığı: Adjusts the temperature of the warm air dryer (Low, High).
- Koltuk Sıcaklığı: Adjusts the heated seat temperature (Low, High).
- Basınç: Adjusts the water spray pressure (+/-).
- Konum: Adjusts the nozzle position (Front/Back).
- Durdur: Stops any active bidet function.
- Be Seated: This button is typically pressed for 2 seconds to activate the seat sensor, allowing functions to operate only when a user is seated.
Bakım
Düzenli temizlik ve bakım, bide koltuğunuzun optimum performans ve hijyenini sağlar.
Bide Klozet Kapağının Temizlenmesi:
- Unplug the power cord and turn off the water supply before cleaning.
- Bide klozetinin dış yüzeylerini yumuşak bir bezle silin.amp bir bez ve yumuşak, aşındırıcı olmayan bir temizleyici kullanın.
- Do not use harsh chemicals, abrasive pads, or benzene-based cleaners, as these can damage the surface.
- For deep cleaning, the quick-release mechanism allows for easy removal of the seat from the mounting plate.
Meme Temizliği:
- The nozzle performs an automatic self-cleaning cycle.
- If manual cleaning is required, gently pull out the nozzle and clean it with a soft brush or cloth. Do not use excessive force.
Sorun giderme
If you encounter issues with your bidet seat, refer to the table below for common problems and solutions.
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Güç yok | Elektrik kablosu prizden çekilmiş, devre kesici atmış. | Ensure power cord is securely plugged in. Check and reset circuit breaker if necessary. |
| Su spreyi yok | Water supply valve closed, water filter clogged, seat sensor not activated. | Open the water supply valve. Clean or replace water filter. Ensure you are properly seated to activate the sensor. |
| Su sıcaklığı çok soğuk/sıcak | Sıcaklık ayarı yanlış. | Adjust water temperature settings on the control panel. |
| Koltuk ısınmıyor. | Koltuk ısıtma fonksiyonu kapalı, sıcaklık ayarı çok düşük. | Activate seat heating and adjust temperature settings on the control panel. |
| Bağlantılardan kaynaklanan sızıntılar | Gevşek bağlantılar, hasarlı contalar. | Tighten all water connections. Check for damaged washers or seals and replace if necessary. |
Bu çözümleri denedikten sonra sorun devam ederse lütfen müşteri desteğiyle iletişime geçin.
Özellikler
| Özellik | Detay |
|---|---|
| Model Numarası | 08C |
| Boyutlar | 19.7 x 18.3 x 6.1 inç |
| Ürün Ağırlığı | 11.77 pound |
| Renk | Beyaz |
| Stil | Armrest-Control Model |
| Güç Gereksinimleri | 110V-120V |
| Su Temini | Household water supply connection |
| Meme Türü | Stainless Steel, Self-Cleaning |
| Özellikler | Heated Seat, Warm Water Wash, Warm Air Dryer, Night Light, Energy Saving Mode |
Garanti ve Destek
Your KERDE 08 Smart Electric Bidet Toilet Seat is covered by a manufacturer's warranty. For specific warranty details, please refer to the warranty card included with your product or contact KERDE customer service. If you require technical assistance, troubleshooting beyond this manual, or have questions regarding your product, please contact KERDE customer support through the retailer where the product was purchased or visit the official KERDE webiletişim bilgileri için site.