1. Giriş
Thank you for choosing Brightever Under Cabinet Lights. These LED rechargeable lights are designed to provide convenient and efficient illumination for various indoor spaces such as kitchens, bedrooms, closets, and hallways. Featuring motion sensor capabilities, stepless dimming, and multiple installation options, these lights enhance visibility and energy efficiency in your home.
2. Kutuda Neler Var?
- 5 x Brightever Under Cabinet Lights
- Kullanım Kılavuzu
- Mounting Hardware (screws and expansion anchors)
- Yapışkanlı Metal Plakalar
- 3 x USB Şarj Kabloları
- Warranty/Explanation Sheet
3. Ürün Özellikleri
| Özellik | Şartname |
|---|---|
| Marka | Daha parlak |
| Model Numarası | YS-CGD20-01 |
| Renk Sıcaklığı | 6500K (Soğuk Beyaz) |
| Pil Kapasitesi | 1500mAh (Şarj Edilebilir) |
| Parlaklık | 150 Lümen |
| Karartma aralığı | %10-100 Kademesiz Karartma |
| Hareket Sensörü Algılama Açısı | 120° |
| Motion Sensor Sensing Range | 10 Ayak |
| Auto-Off Time (Motion Sensor Mode) | 20 saniye hareketsizlik |
| Şarj Süresi | Tam şarj için 3-4 saat |
| Battery Life (Always On Mode) | Up to 10 hours (at 100% brightness) |
| Battery Life (Motion Sensor Mode) | 35-60 days (sensing 10-20 times/day) |
| Malzeme | Akrilik, Alüminyum, Plastik |
| Ürün Boyutları (U x G x Y) | 7.78"U x 1.57"G x 0.39"Y |
| İç/Dış Mekan Kullanımı | Kapalı |
4. Kurulum ve Kurulum
The Brightever Under Cabinet Lights offer three convenient installation methods:
Method 1: Magnetic Attachment
The lights have built-in powerful magnets. If your desired mounting surface is ferromagnetic (e.g., a metal refrigerator or shelf), you can directly attach the light to it.

Method 2: Adhesive Metal Plate
For non-ferromagnetic surfaces, use the provided adhesive metal plates.
- Clean the installation area thoroughly to ensure it is dry and free of dust.
- Peel off the protective film from the adhesive side of the metal plate.
- Attach the metal plates to the desired location. Ensure they are aligned with the magnets on the back of the light.
- Snap the light onto the attached metal plates.

Yöntem 3: Vida ile Montaj
For a more permanent installation, use the provided screws and expansion anchors.
- Mark two holes at the mounting spot, spacing them to match the width of the light bar's mounting points.
- Drill holes at the marked spots. Insert the expansion anchors.
- Secure the metal plates with screws into the anchors.
- Mount the light onto the secured metal plates.

Kurulum Video Kılavuzu
Video: Official Brightever guide demonstrating the installation process and various features of the under cabinet lights.
5. Kullanım Talimatları
The under cabinet lights feature a user-friendly button for control.

Güç Açma/Kapama ve Mod Seçimi
- Bir kez basın: To power on the light.
- Tekrar basın: To switch to Motion Sensor Mode.
- Press a third time: To shut down the light.
Kademesiz Karartma
While the light is on (in either mode), long press the button to steplessly adjust the brightness from 10% to 100%. The light features a memory function that retains the last set brightness level.

Hareket Sensörü Modu
In Motion Sensor Mode, the light automatically detects human activity within a 120° detection angle and a 10FT sensing range. It will turn off after 20 seconds of inactivity to conserve energy.

Işıkları Şarj Etme
The lights are equipped with a 1500mAh rechargeable battery. Use the provided USB charging cables for optimal performance.
- Connect the USB charging cable to the USB-C port on the light.
- A red indicator light will show that the device is charging.
- The indicator light will turn green when fully charged (approximately 3-4 hours).
- A full charge provides up to 10 hours of light in Always On Mode (at 100% brightness) or 35-60 days in Motion Sensor Mode (based on 10-20 detections per day).

6. Bakım
- Temizlik: Açık renkli yüzeyi yumuşak, kuru bir bezle silin. Aşındırıcı temizleyiciler veya çözücüler kullanmayın.
- Pil Bakım: To prolong battery life, avoid fully discharging the battery frequently. Recharge the lights when the brightness noticeably diminishes.
- Depolamak: Lambaları uzun süre saklayacaksanız, tamamen şarj edin ve serin, kuru bir yerde saklayın. Pil ömrünü korumak için 3-6 ayda bir şarj edin.
7. Sorun Giderme
- Işık açılmıyor:
- Ensure the battery is charged. Connect to a power source using the provided USB cable.
- Check if the light is in the correct operating mode (Always On or Motion Sensor). Press the button to cycle through modes.
- Motion sensor is not detecting movement:
- Sensörün engellenmediğinden emin olun.
- Verify the light is in Motion Sensor Mode.
- Avoid positioning multiple sensors too closely, as this may interfere with operation.
- The detection range is 10FT and angle is 120°. Ensure movement occurs within this area.
- Pil çabuk bitiyor:
- Ensure the light is fully charged (indicator turns green).
- In Motion Sensor Mode, frequent activations will consume more battery.
- Ensure you are using the provided charging cables. Other cables may not be compatible and could affect charging efficiency or battery lifespan.
- Işık çok loş veya çok parlak:
- Long press the button to adjust the brightness using the stepless dimming feature.
8. Güvenlik Bilgileri
- Ürünü sökmeyin veya üzerinde değişiklik yapmayın.
- Sudan ve yüksek nemli ortamlardan uzak tutun.
- Doğrudan güneş ışığına ve yüksek sıcaklıklara maruz bırakmayınız.
- Çocukların erişemeyeceği yerde saklayınız.
- Pilleri yerel düzenlemelere göre atın.
9. Garanti ve Destek
Brightever is committed to providing quality products and customer satisfaction. For any questions, concerns, or support needs regarding your under cabinet lights, please refer to the included Warranty/Explanation Sheet or contact Brightever customer service. We strive to offer friendly and helpful services.