giriiş
Welcome to the world of cafe-quality microfoam at home with your new Subminimal NanoFoamer Pro Gen-2. This device is engineered to produce smooth, velvety microfoam for your coffee beverages, suitable for both dairy and plant-based milks. Please read this manual thoroughly before first use to ensure proper operation and maintenance.
Önemli Güvenlik Bilgileri
- Cihazı kullanmadan önce tüm talimatları okuyun.
- Do not immerse the electrical base or cord in water or other liquids. The jug is IPX-5 splash-resistant, but the electrical base is not.
- Ses seviyesini garantileyintagCihazın enerji verimlilik derecesi, yerel elektrik şebekenizle uyumludur.
- Çocukların erişemeyeceği yerde saklayın. Bu cihaz, fiziksel, duyusal veya zihinsel yetenekleri kısıtlı kişiler tarafından kullanılmak üzere tasarlanmamıştır.
- Kullanmadığınızda ve temizlemeden önce daima cihazın fişini prizden çekin.
- Kablo veya fişi hasarlı olan veya cihaz arızalandıktan veya herhangi bir şekilde hasar gördükten sonra hiçbir cihazı çalıştırmayın.
- Yalnızca üretici tarafından önerilen veya satılan ekleri kullanın.
- Hareketli parçalara temas etmekten kaçının.
- Açık havada kullanmayınız.
- Sıcak gazlı veya elektrikli ocakların üzerine veya yakınına, ya da ısıtılmış fırına koymayın.
- Cihazı kullanım amacı dışında kullanmayınız.
Ürün Bittiview
The NanoFoamer Pro Gen-2 is designed for ease of use and superior microfoam production. Key features include an impeller height adjuster, splash resistance, and optimized temperature control.
Figure 1: NanoFoamer Pro Gen-2 overview, highlighting smooth microfoam and compatibility with dairy and plant-based milks.
Temel Bileşenler:
- NanoFoamer Pro Jug: The main vessel for heating and frothing milk.
- Güç Tabanı: Provides power and heating to the jug.
- Pervane: The rotating component that creates microfoam.
- Impeller Height Adjuster: Allows fine-tuning of the impeller's position.
- Flow Controllers: Interchangeable inserts (Black, Blue, Green) to adjust aeration for different milk types.
- Kapak: Transparent lid with a secure seal.
Kurmak
- Paketi aç: Tüm bileşenleri dikkatlice ambalajından çıkarın.
- Temiz: Before first use, wash the NanoFoamer Pro jug, lid, and impeller with warm soapy water. Rinse thoroughly and dry. Do not immerse the power base in water.
- Güç tabanını yerleştirin: Position the power base on a stable, flat, heat-resistant surface near a power outlet.
- Gücü bağlayın: Plug the power cord into the power base and then into a suitable electrical outlet.
- Insert Impeller: Ensure the impeller is securely placed inside the jug.
- Choose Flow Controller: Select the appropriate flow controller for your milk type (see 'Operation' section for guidance) and place it inside the jug.
Operasyon
The NanoFoamer Pro Gen-2 offers precise control over your microfoam. Follow these steps for optimal results:
1. Choosing a Flow Controller
Flow controllers tweak the spinning vortex to adjust for varying viscosities of milk types. Experiment to find which best suits your milk.
Figure 2: Flow controllers for different milk types. Black for dairy, blue and green for milk alternatives.
- Black (Slow Flow): Recommended for dairy milk. This prevents excessive aeration on easy-to-foam milk types.
- Blue (Medium Flow): A good starting point for plant-based milks.
- Green (Fast Flow): For plant-based milks that require more aggressive aeration.
Fine-Tuning Flow Controller:
Figure 3: Guidance for adjusting flow controllers based on aeration and microfoaming results.
- During Aeration Stage: If milk is not aerating enough, switch to a faster flow controller (e.g., from Black to Blue, or Blue to Green) to open up the vortex and allow more air in.
- During Microfoaming Stage: If you hear rips of aeration or too much foam, try a slower flow controller (e.g., from Green to Blue, or Blue to Black) to close up the vortex.
2. Adjusting Impeller Height (Ultrafine Tuning)
The revolutionary impeller height adjuster allows you to raise or lower the impeller by 0.4mm with each click. This fine-tunes the vortex for the ideal magnetic balance, making even tricky milk alternatives manageable.
Figure 4: Adjusting the impeller height for ultrafine tuning of the microfoam.
- Lower the impeller for tiny drinks.
- Raise it for milk alternatives.
3. Program Seçme
Choose from 5 different programs depending on the size of your drink and your desired foam thickness.
Figure 5: New features of NanoFoamer Pro Gen-2, including finer microfoam and hotter drinks.
- The NanoFoamer Pro Gen-2 features improved vortex control and reduced aeration times on programs 1 & 2 for even finer foam on smaller drinks.
- The final milk temperature has been raised by 9°F (5°C), reaching up to 158°F (70°C) for hotter beverages.
4. Süt Köpürtme
- Pour milk into the jug, ensuring it is below the 'MAX' fill line.
- Sürahinin kapağını sıkıca kapatın.
- Sürahiyi güç tabanının üzerine yerleştirin.
- Press the power button to select your desired program. The device will begin frothing automatically.
- Once the program is complete, the device will stop. Carefully remove the jug from the base.
- Pour your perfectly frothed milk into your coffee.
Figure 6: Pouring microfoam from the NanoFoamer Pro Gen-2. Synchronize milk frothing with espresso preparation for optimal results.
Temizlik ve Bakım
Regular cleaning ensures the longevity and performance of your NanoFoamer Pro Gen-2.
Günlük Temizlik:
- Hemen Durulayın: After each use, rinse the jug, lid, and impeller under running water. This prevents milk residue from drying and sticking.
- Wash Jug: The NanoFoamer Pro Gen-2 jug is IPX-5 splash-resistant. It can be safely cleaned under running water. Use a soft sponge and mild detergent if necessary.
- Clean Impeller and Flow Controller: Remove the impeller and flow controller and wash them thoroughly.
- Kuru: Yeniden monte etmeden veya saklamadan önce tüm parçaların tamamen kuru olduğundan emin olun.
Figure 7: The NanoFoamer Pro Gen-2 is IPX-5 splash-resistant for easy cleaning under running water.
Önemli Notlar:
- Never fully submerge the electrical power base in water.
- Do not use abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the surface and internal components.
- The upgraded seal engineering and thicker heat diffuser minimize milk residue, making cleaning quick and effortless.
Sorun giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| No foam or poor quality foam |
|
|
| Süt ısınmıyor |
|
|
| Cihaz beklenmedik bir şekilde duruyor |
|
|
| Çalışma sırasında yüksek ses |
|
|
Özellikler
- Modeli: NFPRO-02-BL-US
- Marka: Alt düzey
- Malzeme: Paslanmaz çelik
- Ürün Ağırlığı: 1.9 pound
- Paket Boyutları: 9.49 x 7.6 x 5.59 inç
- Suya Dayanıklılık: IPX-5 (Jug only)
- Maksimum Sıcaklık: 158 °F'ye (70 °C) kadar
Garanti ve Destek
Subminimal provides a limited warranty for this product against defects in materials and workmanship under normal use. For specific warranty terms, registration, or technical support, please visit the official Subminimal website or contact customer service. Keep your purchase receipt as proof of purchase.