DARKROCK Classico Max Storage Master E-ATX Computer Case Instruction Manual

1. Giriş

This manual provides detailed instructions for the assembly, operation, and maintenance of your DARKROCK Classico Max Storage Master E-ATX Computer Case. Please read this manual thoroughly before beginning installation to ensure proper setup and optimal performance.

2. Temel Özellikler

• Extensive Storage Support: Accommodates up to 10x 3.5" HDDs and 3x 2.5" SSDs, providing ampveri depolama için dosya alanı.
• Dikey GPU Montajı: Features 3 vertical slots for graphics card installation, optimizing airflow and aesthetics.
• Anakart Uyumluluğu: Supports E-ATX, ATX, M-ATX, and ITX motherboards. Note: Hard drive cages may need to be removed for E-ATX motherboard installation.
• Gelişmiş Soğutma Desteği: Designed to support up to a 360mm liquid radiator in the top panel for efficient heat dissipation.
• Optimize Edilmiş Hava Akışı: Mesh front and side panels, combined with four pre-installed 120mm fans, ensure excellent heat dissipation and maintain low internal temperatures.
• Ön Panel Bağlantısı: Includes 2x USB 3.0 ports, 2x USB 2.0 ports, and HD audio jacks for convenient peripheral access.

3. Özellikler

Image: Internal layout showing drive bay locations and case dimensions (18.3"D x 9.06"W x 18.78"H).

Image: Internal clearances for CPU cooler (max 180mm height), GPU (295mm, 400mm if drive bay removed), and motherboard sizes (E-ATX, ATX, M-ATX, ITX).

Image: Diagram illustrating liquid radiator and fan support locations (240/280/360mm liquid radiator, 140mm/120mm fans).

4. Kurulum Kılavuzu

4.1. Davayı Hazırlama

1. Kutuyu açın: Carefully remove the computer case from its packaging.
2. Yan Panelleri Çıkarın: Locate the thumbscrews on the rear of the case. Unscrew them and gently slide off the side panels. Set them aside in a safe place.
3. Aksesuarları inceleyin: Verify all included accessories (screws, cable ties, manual) are present.

4.2. Anakart Kurulumu

1. Ara Parçaları Takın: Ensure the correct motherboard standoffs are installed for your motherboard form factor (E-ATX, ATX, M-ATX, ITX). Additional standoffs may be in the accessory kit.
2. G/Ç Kalkanını yükleyin: Snap your motherboard's I/O shield into the rear I/O opening of the case.
3. Anakartı Monte Et: Carefully align your motherboard with the standoffs and I/O shield. Secure it with the provided screws.
4. E-ATX Note: For E-ATX motherboards, it may be necessary to remove the front hard drive cages to provide sufficient clearance. Refer to the specifications for exact dimensions.

4.3. Drive Installation (HDD/SSD)

• 3.5 inç HDD Kurulumu: The case supports up to 10x 3.5" HDDs in dedicated drive bays. Slide the HDD into an available bay and secure it with screws.
• 2.5 inç SSD Kurulumu: The case supports up to 3x 2.5" SSDs. These typically mount behind the motherboard tray or in specific 2.5" drive trays. Secure the SSD with screws.

4.4. Grafik Kartı (GPU) Kurulumu

• Standart kurulum: Insert the GPU into the appropriate PCIe slot on your motherboard and secure it with the retention clip and a screw to the case.
• Dikey Kurulum: The case features 3 vertical expansion slots for vertical GPU mounting. An optional PCIe riser cable (not included) is required for this configuration. Install the riser cable, then mount the GPU vertically and secure it.

4.5. Soğutma Sistemi Kurulumu

• Önceden yüklenmiş Fanlar: The case comes with four 120mm fans pre-installed (three front, one rear). Connect these fans to your motherboard's fan headers or the included 6x 3-pin fan hub (powered via SATA).
• Liquid Radiator Installation: The top panel supports up to a 360mm liquid radiator. Ensure adequate clearance and remove any obstructing components (e.g., top hard drive cage) if necessary.

4.6. Kablo Yönetimi

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables. This improves airflow and maintains a clean internal appearance.

Resim: Patlamış view of the case showing removable panels and internal structure.

Image: Rear internal view showing cable routing options and fan hub.

Image: Diagram showing the location of the four pre-installed 120mm fans and the 6x 3-pin fan hub with SATA power input.

5. Kullanım Talimatları

• Güç Açma/Kapatma: Use the power button located on the top front panel to turn the system on or off.
• Sıfırlama Düğmesi: The reset button is also on the top front panel for system restarts.
• Ön Panel Portları: Connect USB devices to the USB 2.0 or USB 3.0 ports. Use the HD audio jacks for headphones and microphones.

Image: Close-up of the top front panel showing USB 3.0, USB 2.0, HD Audio, Reset, and Power buttons.

6. Bakım

• Toz Filtresi Temizliği: The case includes dust filters on the front, top, and bottom (for PSU). Regularly remove and clean these filters to maintain optimal airflow and prevent dust buildup inside the system.
• İç Temizlik: Periodically open the side panels and use compressed air to remove dust from internal components, especially fans and heatsinks.

7. Sorun Giderme

• Sistem Açılmıyor:
  • Ensure the power supply is properly connected to the wall outlet and the case.
  • Tüm dahili güç bağlantılarını kontrol edin (24 pinli ATX, CPU gücü, GPU gücü).
  • Verify front panel power button cables are correctly connected to the motherboard.
• Görüntü Çıkışı Yok:
  • Confirm the monitor cable is connected to the graphics card, not the motherboard (if a dedicated GPU is installed).
  • Ekran kartını ve RAM modüllerini yeniden yerleştirin.
• Aşırı Isınma Sorunları:
  • Ensure all case fans are spinning and connected correctly.
  • Toz filtrelerini ve iç bileşenleri temizleyin.
  • İşlemci soğutucusunun düzgün bir şekilde yerleştirildiğinden ve işlemciyle iyi temas ettiğinden emin olun.
• Sürücü Algılanmadı:
  • Check SATA data and power cables for secure connections to both the drive and motherboard/power supply.
  • Verify the drive is enabled in the BIOS/UEFI settings.

8. Garanti ve Destek

The DARKROCK Classico Max computer case comes with a 1 yıllık garanti Satın alma tarihinden itibaren geçerlidir. Bu garanti, normal kullanım koşullarında üretim hatalarını ve malzeme kusurlarını kapsar.

For technical support, warranty claims, or further assistance, please visit the official DARKROCK webSiteyi ziyaret edin veya müşteri hizmetleri departmanıyla iletişime geçin. Garanti geçerliliği için satın alma belgenizi saklayın.

Official DARKROCK Store: DARKROCK Amazon Store

9. Medya Galerisi

Resim: Ön taraf view of the DARKROCK Classico Max computer case.

Resim: Dahili view of the case, highlighting its suitability for various applications like video editing, home theater, and gaming.

Image: Internal layout showing drive bay locations and case dimensions (18.3"D x 9.06"W x 18.78"H).

Image: Internal clearances for CPU cooler (max 180mm height), GPU (295mm, 400mm if drive bay removed), and motherboard sizes (E-ATX, ATX, M-ATX, ITX).

Image: Diagram illustrating liquid radiator and fan support locations (240/280/360mm liquid radiator, 140mm/120mm fans).

Image: Close-up of the top front panel showing USB 3.0, USB 2.0, HD Audio, Reset, and Power buttons.

Resim: Patlamış view of the case showing removable panels and internal structure.

Image: Rear internal view showing cable routing options and fan hub.

Image: Diagram showing the location of the four pre-installed 120mm fans and the 6x 3-pin fan hub with SATA power input.

Videolar