1. Giriş
This manual provides detailed instructions for the installation, operation, and maintenance of your Ailgely Motorcycle LED Display Gauge. This multi-functional instrument integrates a speedometer, odometer, tachometer, and fuel gauge, designed to provide essential riding information with enhanced visibility and customizable settings.
Temel Özellikler:
- Özelleştirilebilir Ayarlar: Easily adjust speed, RPM, and fuel capacity with a button press for a personalized driving experience.
- Çok Fonksiyonlu Ekran: Integrates speedometer, odometer, tachometer, and fuel gauge for comprehensive monitoring.
- Kolay Kurulum: Designed for quick and hassle-free setup, enhancing rider convenience.
- Gelişmiş Görünürlük: Features a white backlight and large LCD display for clear readability day and night, reducing eye strain.
- Accurate Fuel Gauge: Displays fuel level in 5 segments, providing precise and reliable information for efficient fuel management.
2. Güvenlik Bilgileri
Please read all safety warnings and instructions carefully before installation and operation. Failure to follow these instructions may result in product damage, property damage, or personal injury.
- Ensure the motorcycle's power is off before beginning installation.
- Kurulum adımlarından herhangi biri konusunda emin değilseniz, yetkili bir teknisyene danışın.
- Do not modify the product or its wiring in any way not described in this manual.
- Ürünü aşırı sıcaklık ve nemden uzak tutun.
3. Paket İçeriği
Paketin içinde tüm öğelerin mevcut olduğundan emin olun:
- Ailgely Motorcycle LED Display Gauge (Model Aiafz5gcgpun-2)
- Kablo demeti
- Speed Sensor (if included with your specific variant)
- Mounting Hardware (bolts, nuts, washers)
- Kullanım Kılavuzu (bu belge)
Resim 1: Ön view of the Ailgely Motorcycle LED Display Gauge with its wiring harness.
Resim 2: Arka view of the gauge, highlighting the mounting bolts and electrical connectors.
4. Kurulum ve Kurulum
This section details the steps for installing your new LED display gauge. Professional installation is recommended if you are unfamiliar with motorcycle electrical systems.
4.1 Kablolama Şeması
Refer to the following general wiring guide. Specific wire colors may vary, but the functions are standard. Always cross-reference with your motorcycle's wiring diagram.
Resim 3: Örn.ample wiring diagram showing connections for power, ground, speed sensor, tachometer, and indicator lights.
- Kırmızı Tel: +12V (Ignition Switched Power)
- Siyah Tel: Zemin (-)
- Yeşil Tel: Speed Sensor Signal
- Yellow/Black Wire: Tachometer Signal (Connect to ignition coil positive or ECU tach output)
- Mavi Tel: High Beam Indicator (+)
- Turuncu Tel: Left Turn Signal Indicator (+)
- Light Blue Wire: Right Turn Signal Indicator (+)
- Kahverengi Tel: Fuel Level Sensor Input
- Beyaz Tel: Neutral Gear Indicator (+)
- Other Wires (if present): Refer to specific product documentation or consult a professional.
Note: Some reviews indicate that the turn signal indicators might not be separated for left/right. If your motorcycle uses separate left/right signals and the gauge only has one input, you may need to use diodes to combine the signals before connecting to the gauge.
4.2 Mounting the Gauge
- Choose a suitable location on your motorcycle's dashboard or handlebars.
- Use the provided mounting hardware to securely attach the gauge. Ensure it is stable and visible to the rider.
Resim 4: Yan view showing the compact design and mounting points of the gauge.
4.3 Hız Sensörü Montajı
- Install the speed sensor near a rotating part of the wheel (e.g., brake rotor bolts).
- Attach the magnet(s) to the rotating part, ensuring they pass close to the sensor head with each rotation.
- Connect the speed sensor wire to the corresponding input on the gauge's wiring harness.
4.4 Initial Configuration (Speed and RPM)
To enter the setup mode for speed and RPM calibration:
- With the motorcycle's ignition OFF, press and hold the button on the gauge.
- While holding the button, turn the ignition ON.
- The display will enter configuration mode. Follow the on-screen prompts or refer to the specific instructions provided with your unit for detailed calibration steps.
- Hız Kalibrasyonu: Set the tire circumference (diameter x π). This value is crucial for accurate speed and odometer readings.
- RPM Calibration: Adjust the RPM setting according to your engine's cylinder count and ignition type. This typically involves setting the pulse ratio.
5. Kullanım Talimatları
Once installed and configured, the gauge will display various parameters:
- Hız: Güncel sürüş hızı.
- Devir: Motorun dakikadaki devir sayısı.
- Kilometre sayacı: Kat edilen toplam mesafe.
- Yakıt Göstergesi: Displays current fuel level in 5 segments. If not connected, it may display battery voltage.
- Gösterge Işıkları: High beam, turn signals (left/right), and neutral gear.
Resim 5: Ön view of the gauge, illustrating the display screen and control button.
5.1 Düğme Fonksiyonları
The single button on the gauge typically serves multiple functions:
- Kısa Basış: Cycle through display modes (e.g., Odometer, Trip A, Trip B).
- Uzun basma: Reset trip meters or enter/exit settings mode (as described in Section 4.4).
6. Bakım
To ensure the longevity and optimal performance of your Ailgely LED Display Gauge, follow these maintenance guidelines:
- Temizlik: Wipe the display with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the screen.
- Kablolama Denetimi: Periodically check all wiring connections for looseness or corrosion. Ensure wires are securely routed and protected from heat and moving parts.
- Sensör Kontrolü: Verify that the speed sensor and its magnet(s) are clean and properly aligned.
- Suya Maruz Kalma: While designed to be water-resistant, avoid direct high-pressure water jets on the unit.
7. Sorun Giderme
If you encounter issues with your gauge, refer to the following common problems and solutions:
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Güç Yok/Ekran Kapalı | Loose wiring connection, blown fuse, faulty power supply. | Check all power and ground connections. Inspect motorcycle fuses. Ensure 12V power is reaching the red wire. |
| Speed/Odometer Inaccurate or Not Working | Incorrect speed calibration, faulty speed sensor, misaligned magnet. | Recalibrate speed setting (tire circumference). Check speed sensor wiring. Ensure magnet passes close to the sensor. |
| Tachometer Not Working | Incorrect RPM calibration, incorrect wiring to ignition coil/ECU, weak signal. | Recalibrate RPM setting. Verify tachometer signal wire connection. Try connecting to a different signal source if available (e.g., negative side of ignition coil if connected to positive). |
| Fuel Gauge Inaccurate or Not Working | Incorrect fuel sensor wiring, incompatible fuel sensor, faulty sensor. | Check fuel sensor wiring. Ensure the fuel sensor type is compatible with the gauge. If no fuel sensor is connected, the gauge may display battery voltage. |
| Indicator Lights Not Functioning | Incorrect wiring, faulty bulb/LED in motorcycle, diode required for combined signals. | Verify wiring for each indicator. If turn signals are combined, ensure diodes are used if necessary. |
If the problem persists after attempting these solutions, contact customer support or a qualified motorcycle technician.
8. Özellikler
| Özellik | Detay |
|---|---|
| Marka Adı | Ailgely |
| Model Numarası | Aiafz5gcgpun-2 |
| Üretici Model Numarası | Aiafz5gcgpun-2 |
| Kökeni | Çin |
| Ürün Türü | Car Monitor Accessory (Motorcycle Instrument Cluster) |
| Görüntü Türü | LED LCD with White Backlight |
| Fonksiyonlar | Speedometer, Odometer, Tachometer, Fuel Gauge, Indicator Lights |
| Malzeme | Black Plastic + Metal |
9. Garanti ve Destek
Garanti: Bu ürün bir 1 yıllık garanti Satın alma tarihinden itibaren üretim hatalarını da kapsayan garanti kapsamındadır. Lütfen garanti talepleriniz için satın alma belgenizi saklayın.
Hariç tutulanlar: The warranty does not cover damage caused by improper installation, misuse, accidents, unauthorized modifications, or normal wear and tear.
Müşteri Desteği: For technical assistance, warranty claims, or any questions regarding your Ailgely Motorcycle LED Display Gauge, please contact your retailer or the manufacturer directly. Refer to your purchase documentation for contact details.