giriiş
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your mGYDY 36V 48V 750W KT 25A Electric Bicycle Controller Kit. Please read this manual thoroughly before use to ensure proper function and safety.
Paket İçeriği
Aşağıdaki öğeler paketinize dahildir:
- 1 x 25A Electric Motor Controller
- 1 x LCD5 Display
- 1 x TT009 Thumb Throttle
- 1 x 1T4 Cable
Şekil 1: Üzeriview of the mGYDY Electric Bicycle Controller Kit components.
Video 1: Kutudan çıkarma ve sonrasıview of the Electric Bike Brushless Controller Kit components.
Özellikler
| Özellik | Tanım |
|---|---|
| Öğe Türü | Kontrolör |
| Malzeme | Alüminyum Alaşımı, ABS |
| Controller Box Size | Yaklaşık 125x66x39 mm / 4.9x2.6x1.5 inç |
| Denetleyici Türü | Fırçasız Motor Kontrolörü |
| Bağlayıcı Türü | Su Geçirmez Konnektör |
| Maksimum Akım | 25±1A |
| Anma Hacmitage | DC 36V / 48V |
| Hız Ayarı | 1-4.2V |
| Anma Akımı | 12A |
| Fren Girişi | Düşük Seviye |
| Düşük Hacimtage Koruma | DC 30/40±0.5V |
| Uygulanabilir Motor | Usually 750W Motor |
| LCD5 Display Type | GD01 (or S866 as per video) |
| LCD5 Line Length | 225mm (WP Plug) |
| TT009 Throttle Type | Quick Thumb Throttle |
| TT009 Throttle Material | Bilgisayar+ABS |
| TT009 Throttle Voltage | 12V 24V 36V 48V 52V 60V 72V |
| TT009 Throttle Installation | Sağ ve Sol |
Figure 2: Controller dimensions and basic specifications.
Figure 3: LCD5 Display dimensions and specifications.
Figure 4: TT009 Thumb Throttle specifications.
Kurulum ve Yükleme
Proper installation is crucial for the safe and efficient operation of your e-bike kit. Ensure all connections are secure and waterproof where applicable.
Controller Wiring Instructions
Connect the corresponding line interfaces as described below to enable the kit's functions. It is essential to use this kit with a brushless motor and it is only compatible with KT series instrument products.
- Black Long Wire: Connect to the Motor Wire.
- Red and Black Single Big Wire: Connect as the Power Cord.
- Black Long Wire (Fine Hole): Connect to the One for Four/One for Five (9 Cores) cable.
- Black Line and Red Head: Connect to the Light Line.
- Black Wire and Yellow Head: Connect to the Power Assist Sensor Wire.
Figure 5: Controller wiring diagram showing various connections.
Figure 6: 1T4 Cable product connector details.
Display and Throttle Installation
The LCD5 display features an open design for easy installation on 22mm diameter handlebars, eliminating the need to remove the bike handlebars. The 1T4 cable connects the display, thumb throttle, and two brake levers to the controller.
Figure 7: LCD5 Display easy installation feature.
Video 2: Detailed demonstration of controller plug connections, including phase position, display, throttle, Hall sensor, battery, and e-brakes. Also shows display testing and parameter settings.
Kullanım Talimatları
The LCD5 display provides various user parameter setting functions to customize your e-bike's performance.
LCD5 Display Functions
The display shows speed, PAS level, battery level, total mileage, single mileage, light indication, single trip time, and error codes. Refer to the diagram below for button functions and display indicators.
Figure 8: KT-LCD5 e-Bike Display User Manual - Functions and Display.
Parametre Ayarları
The display allows setting and adjusting motor parameters, speed measurement parameters, speed limit parameters, power parameters, power auxiliary control parameters, minimum controller voltage, and maximum current parameters. To enter parameter setting mode, press and hold the '+' and '-' buttons simultaneously. Use the '+' and '-' buttons to navigate and adjust values. Press the 'M' button to save and exit.
- P01: Backlight brightness (1-3 levels)
- P02: Change metric (0: Km, 1: Mile)
- P03: pil hacmitage setting (24V/36V/48V/60V/72V, default 36V). Adjust 36V-60V voltage.
- P04: Hibernate mode time (1-60 minutes, 0: never enter this mode)
- P05: Total assist levels (0-5 levels)
- P06: Wheel size (inch)
- P07: Speed calculation (number of magnets for speed calculation, range: 1-255)
- P08: Speed limit range (0-100km/h)
- P09: Zero speed start (0: zero start, 1: non-zero start)
- P10: Sürüş modu seçimi
- P11: Assist sensitivity
- P12: Assist starting power
- P13: Assist disc type
- P14: Current limit of controller
- P15: Düşük hacimtage protection setting of controller
- P16: ODO distance reset
- P17: Cruise mode selection
- P18: Hız oranı
- P19: Yardım seviyesi
- P20: Protokol seçimi
Bakım
Regular maintenance ensures the longevity and optimal performance of your e-bike kit.
- Keep all components clean and free from dust and debris.
- Regularly check all electrical connections for tightness and signs of wear.
- Ensure waterproof connectors are properly sealed to prevent moisture ingress.
- Inspect cables for any damage or fraying and replace if necessary.
- Store the e-bike in a dry environment when not in use.
Sorun giderme
If you encounter issues, refer to the error codes displayed on the LCD5 and the following general troubleshooting tips.
Error Codes (from LCD5 Display)
| Kod (Ondalık) | Tanım |
|---|---|
| E00 | Normal |
| E01 | Rezerve |
| E02 | Fren Hatası |
| E03 | Assist Sensor Error |
| E04 | 6KM/H Push Mode |
| E05 | Seyir Modu |
| E06 | Pil Düşük Hacmitage Koruma |
| E07 | Motor Hatası |
| E08 | Gaz Hatası |
| E09 | Denetleyici Hatası |
| E10 | COM Receive Error |
| E11 | COM Send Error |
| E12 | BMS İletişim Hatası |
| E13 | Head Light Error |
For any error code, first check all connections. If the issue persists, consult a qualified technician.
Garanti ve Destek
Garanti Bilgileri
Bu ürün bir 1 Yıl Üretici GarantisiGaranti talepleri için lütfen satın alma belgenizi saklayınız. Garanti, normal kullanım koşullarındaki üretim hatalarını kapsar.
Müşteri Desteği
For technical assistance, troubleshooting, or warranty inquiries, please contact mGYDY customer support through your retailer or the official mGYDY webalan.