EverBrite Rechargeable Underhood Work Light E111014AE Instruction Manual

giriiş

Thank you for choosing the EverBrite Rechargeable Underhood Work Light. This manual provides essential information for the safe and efficient use of your new work light. Please read it thoroughly before operation and retain it for future reference.

Image: The EverBrite Rechargeable Underhood Work Light, showing its flexible light strip and magnetic ends with adjustable straps.

Ürün Özellikleri

• Üç Aydınlatma Modu: High, Medium, and Low settings to adapt to various lighting requirements.
• USB-C Hızlı Şarj: Equipped with two USB-C charging ports and LED indicators (red for charging, green for full charge).
• Magnetic Base Design: Integrated magnets allow secure attachment to metal surfaces for hands-free operation.
• Adjustable Elastic Strap: Durable nylon strap designed to fit vehicle hoods from 52 to 75 inches wide, providing a secure and flexible fit.
• Dual Hooks: Sturdy hooks on both ends offer additional stability and mounting options.

Kutuda Neler Var?

• EverBrite Rechargeable Underhood Work Light (Model E111014AE)
• USB-C Şarj Kablosu
• Kullanım Kılavuzu

Image: Diagram showing the light strip, switch button, magnetic base, charging port, charging indicator, adjustable strap, and hook components.

Kurulum ve Yükleme

1. Prepare the Light: Unfold the work light. Ensure the elastic straps are properly attached to the magnetic ends.
2. Position on Hood: Open the vehicle's hood. Place the magnetic ends of the light onto the metal frame of the hood. The magnets will securely hold the light in place.
3. Kayışlarla Sabitleyin: Extend the adjustable elastic straps over the hood. Hook the ends of the straps onto suitable points on the hood or vehicle frame to provide additional stability and prevent accidental dislodgement. Adjust the strap length to ensure a snug fit across the hood (compatible with hoods 52 to 75 inches wide).
4. Işık Yönünü Ayarla: The flexible light strip can be bent and angled to direct illumination precisely where needed within the engine bay.

Image: The EverBrite work light installed under a car hood, illuminating the engine bay. The adjustable straps are visible.

Resim: Yakın çekim view of the hanging hooks on the EverBrite work light, designed for securing the fixture.

Image: The magnetic base of the EverBrite work light attached to a metal pegboard, demonstrating its hands-free capability.

Kullanım Talimatları

1. Güç Açma/Kapatma: Short press the switch button located on either end of the light to turn it ON.
2. Döngü Modları: Once ON, short press the switch button repeatedly to cycle through the three lighting modes: High, Medium, Low, and then OFF.
3. Mode Sequence: High Brightness → Medium Brightness → Low Brightness → OFF.

Image: The EverBrite work light displaying its three distinct lighting modes: Low (200LM, 14H), Medium (400LM, 6H), and High (900LM, 3.5H).

Şarj Talimatları

1. Şarj Cihazını Bağlayın: Locate the USB-C charging port on the side of the light. Open the protective cover and insert the provided USB-C cable.
2. Şarj Durumunu İzleyin: An LED indicator will illuminate red to show that the device is charging.
3. Tam Şarj Göstergesi: The LED indicator will turn green when the battery is fully charged. A full charge typically takes approximately 2 hours.
4. Bağlantıyı kes: Once fully charged, disconnect the USB-C cable and close the protective cover to maintain water resistance.

Dikkat: Do not operate the light while it is charging.

Image: Close-up of the EverBrite work light showing the USB-C charging port and the red/green LED charging indicators.

Bakım

• Temizlik: Işığı yumuşak bir bezle silin.amp bezle silin. Aşındırıcı temizleyiciler veya çözücüler kullanmayın.
• Depolamak: Çalışma lambasını kullanılmadığı zamanlarda serin, kuru ve doğrudan güneş ışığından uzak bir yerde saklayın.
• Pil Bakım: To prolong battery life, charge the device fully before long-term storage and recharge every 3-6 months.

Sorun giderme

• Işık Açılmıyor:
  • Pilin şarjlı olduğundan emin olun. Bir güç kaynağına bağlayın ve şarj göstergesini kontrol edin.
  • Güç düğmesine sıkıca basın.
• Light Not Holding Charge:
  • Şarj kablosunun ve adaptörün doğru çalıştığını doğrulayın.
  • Şarj portunun temiz ve kalıntılardan arındırılmış olduğundan emin olun.
• Magnets Not Holding Securely:
  • Ensure the surface is clean and metallic.
  • Use the adjustable straps and hooks for additional support, especially on uneven or painted surfaces.

Özellikler

Güvenlik Bilgileri

• Do not look directly into the light source when operating on high brightness to avoid eye strain.
• Çocukların erişemeyeceği yerde saklayınız.
• Ürünü sökmeyin veya üzerinde değişiklik yapmayın.
• Avoid exposing the product to extreme temperatures or direct flame.
• Su geçirmezliği korumak için şarj etmediğiniz zamanlarda şarj portu kapağının güvenli bir şekilde kapalı olduğundan emin olun.

Garanti ve Destek

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official EverBrite webalan.