giriiş
Thank you for choosing the FULEN Motion Sensor Wall Lamp, Model WL04. This rechargeable LED wall light is designed to provide convenient and adjustable illumination for various indoor spaces. Featuring a sensitive motion sensor, remote control operation, and multiple color temperature options, this lamp enhances both functionality and ambiance. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.
Kutuda Neler Var?
- Duvar lamp with motion sensor (x4)
- Uzaktan Kumanda (x1)
- Şarj kablosu (x4)
- Base and double-sided adhesive pad (x6)
- Accessory screw (x4)
Ürün Özellikleri
- Akıllı Hareket Sensörü: Automatically lights up in dark environments when motion is detected within 3.5 meters (11 feet) and a 120-degree wide angle. Turns off after 30 seconds of no activity.
- Büyük Kapasiteli Şarj Edilebilir Pil: Built-in 5000mAh battery provides up to 10 hours of continuous lighting at maximum brightness.
- Kullanışlı Uzaktan Kumanda: Control power, mode, brightness, and color temperature from up to 6-7 meters (22 feet) away. (Requires two AAA batteries for remote control, not included).
- Adjustable Brightness & Color Temperature: Offers 600LM super bright and soft light with three color temperatures (Cold White, Natural White, Warm White) and five brightness levels.
- Kolay Kurulum: Two installation methods: adhesive pads for smooth surfaces or expansion screws for more permanent mounting.
- Çok Yönlü Kullanım: Suitable for various indoor scenes such as living rooms, bedrooms, corridors, stairs, and kitchens.
Kurulum ve Yükleme
The FULEN Motion Sensor Wall Lamp offers flexible installation options to suit your needs.
- Kurulum Yöntemini Seçin: Decide between using the double-sided adhesive pads for smooth walls or the provided expansion screws for other surfaces.
- Tabanı Hazırlayın: If using adhesive, peel off the protective film from the double-sided adhesive pad and firmly attach it to the back of the mounting base.
- Tabanı Monte Edin: Secure the base to your desired wall location. Ensure the 'UP' arrow on the base is pointing upwards. For adhesive, press firmly for 1-2 minutes. For screws, drill pilot holes and secure the base with the accessory screws.
- L'yi takınamp: Align the wall lamp with the mounted base and slide it into place. The magnetic connection will secure the lamp.
Kullanım Talimatları
The FULEN Motion Sensor Wall Lamp can be operated via its integrated buttons or the included remote control.
Motion Sensor Mode (Auto Mode)
In dark environments, the lamp will automatically enter sensing mode. When human movement is detected within 3.5 meters (11 feet) and a 120-degree wide angle, the light will turn on. It will automatically turn off after 30 seconds of no further movement.
Uzaktan Kumanda İşlemi
Use the remote control to conveniently adjust the lamp'nin ayarları:
- Güç Açma/Kapatma: l'yi açmak için güç düğmesine basınamp açık veya kapalı.
- Parlaklık Ayarı: Use the brightness +/- buttons to increase or decrease the light intensity (5 levels).
- Renk Sıcaklığı: Cycle through Cold White, Natural White, and Warm White color temperatures using the dedicated button.
- Zamanlayıcı Ayarları: l'yi ayarlaamp to turn off automatically after 10 or 30 minutes. A single blink confirms successful timer setting.
- Mod Seçimi: Switch between 'On' (always on) and 'Auto' (motion sensor) modes.
Manuel Düğme İşlemi
Lamp also features manual buttons for basic control:
- Güç Düğmesi: Short press to cycle through color temperatures. Long press to adjust brightness.
- Mod Anahtarı: Slide the switch to select ON (always on), AUTO (motion sensor), or OFF.
Resmi Ürün Videosu: Kullanım ve Özellikler
Video: Demonstrates the FULEN Motion Sensor Wall Light's color temperature changes, brightness adjustment, and motion sensing capabilities, along with detaching for charging.
Bakım
L'yi şarj etmekamp
The FULEN Motion Sensor Wall Lamp is equipped with a 5000mAh rechargeable battery. When the battery is low, detach the lamp from its magnetic base and connect it to a USB power source using the provided USB-C charging cable. A full charge typically takes approximately 5 hours and provides up to 10 hours of continuous use at maximum brightness.
Sorun giderme
- Lamp not turning on in Auto Mode: Ensure the environment is dark enough for the motion sensor to activate. Check if the lamp is fully charged. Verify the mode switch is set to 'AUTO'.
- Uzaktan kumanda çalışmıyor: Check if the remote control batteries (AAA) need replacement. Ensure there are no obstructions between the remote and the lampsensörü.
- Işık çıkışı zayıf: Adjust the brightness using the remote control or the manual button. Ensure the lamp tam şarjlı.
- Lamp not holding charge: Ensure the charging cable is securely connected and the power source is functional. If issues persist, contact customer support.
Özellikler
| Özellik | Detay |
|---|---|
| Marka | FÜLEN |
| Model Adı | WL04 |
| Renk | Beyaz |
| Malzeme | Akrilonitril Bütadien Stiren |
| Ürün Boyutları | 3.9"U x 3.4"G x 2"Y |
| Güç Kaynağı | AC/DC (Rechargeable Battery) |
| Pil Kapasitesi | 5000mAh Lityum İyon (dahil) |
| Işık Kaynağı Türü | NEDEN OLMUŞ |
| Parlaklık | 600 Lumen (Maximum) |
| Renk Sıcaklığı | 3000 Kelvin (Warm White), Natural White, Cold White |
| Kontrol Yöntemi | Uzaktan, Dokunmatik |
| Özel Özellikler | Color Changing, Energy Efficient, Motion Sensor, Portable, Timer |
| Su Direnç Seviyesi | Suya dayanıklı değil |
Garanti ve Destek
FULEN is committed to providing high-quality products. This product comes with an Extended Warranty Type. If you have any questions about your product or encounter any quality problems, please do not hesitate to contact the FULEN customer support team. We aim to respond and resolve your issues within 24 hours to ensure your satisfaction.