be quiet! Pure Base 501 Airflow Window Black ATX Mid-Tower PC Case

1. Giriş

This manual provides detailed instructions for the installation, operation, and maintenance of your be quiet! Pure Base 501 Airflow Window Black ATX Mid-Tower PC Case. Designed for optimal cooling and quiet operation, this case supports a wide range of components and offers a clean, stylish aesthetic with its tempered glass side panel and mesh front.

2. Güvenlik Bilgileri

• Bilgisayar kasasının içine herhangi bir kurulum veya bakım işlemi yapmadan önce daima güç kaynağını duvar prizinden çıkarın.
• Handle components with care to avoid damage from electrostatic discharge. Consider using an anti-static wrist strap.
• Kasanın içindeki keskin kenarlara dikkat edin.
• Do not obstruct ventilation openings. Ensure adequate airflow around the case.
• Keep the case away from direct sunlight, heat sources, and liquids.
• Bu ürün yalnızca iç mekanda kullanıma yöneliktir.

3. Paket İçeriği

Paketin tüm bileşenlerinin mevcut olduğunu doğrulayın:

• be quiet! Pure Base 501 Airflow Window Black PC Case
• 2x pre-installed be quiet! Pure Wings 3 PWM 140mm fans (1x front, 1x rear)
• Aşağıdakileri içeren aksesuar kutusu:
  • Various screws for motherboard, SSDs, HDDs, and power supply
  • Kablo bağları
  • Kullanıcı kılavuzu

4. Kurulum ve Kurulum

Follow these steps to install your PC components into the Pure Base 501 Airflow Window case.

4.1. Davayı Hazırlama

• Kasayı düz ve sabit bir yüzeye yerleştirin.
• Remove the tempered glass side panel by unscrewing the thumb screws at the rear and carefully pulling the panel away.
• Remove the solid steel side panel (opposite side) by unscrewing the thumb screws and sliding it backward.
• The front mesh panel can be removed by pulling it from the bottom edge to access front fan mounts.
• The top panel can be removed to access top fan/radiator mounts.

4.2. Anakart Kurulumu

• Ensure the correct standoffs are installed for your motherboard form factor (ATX, Micro-ATX, Mini-ITX). The case comes with pre-installed standoffs for ATX.
• G/Ç kalkanını kasanın arka açıklığına takın.
• Anakartınızı dikkatlice desteklerin üzerine yerleştirin ve vida deliklerini hizalayın.
• Anakartı, aksesuar kutusunda bulunan uygun vidalarla sabitleyin.

4.3. Güç Kaynağı Ünitesi (PSU) Kurulumu

• Mount the PSU to the bracket at the rear bottom of the case.
• Slide the PSU with the bracket into the PSU shroud from the rear of the case.
• Secure the PSU bracket with screws.

4.4. Depolama Sürücüsü Kurulumu

• 3.5" HDD'ler: Install up to two 3.5" drives in the removable HDD cage located under the PSU shroud. Slide the drives into the trays and secure them.
• 2.5 inç SSD/HDD'ler: Install up to five 2.5" drives. Two mounts are located behind the motherboard tray, and three can be installed on the HDD cage. Secure drives with screws.

4.5. Graphics Card (VGA) and Expansion Card Installation

• Kasanın arka tarafındaki gerekli genişletme yuvası kapaklarını çıkarın.
• Insert your graphics card or other expansion cards into the PCIe slots on the motherboard.
• Kartları vidalarla sabitleyin.

4.6. Fan ve Radyatör Montajı

• The case comes with two 140mm Pure Wings 3 PWM fans pre-installed (one front, one rear).
• Ön: Supports 2x 140mm or 3x 120mm fans. Radiators up to 360mm.
• Tepe: Supports 2x 140mm or 2x 120mm fans. Radiators up to 140mm.
• Arka: Supports 1x 140mm or 1x 120mm fan. Radiators up to 140mm.
• En uygun hava akışı için fanların doğru şekilde yerleştirildiğinden emin olun (hava girişi önde, hava çıkışı arkada/üstte).

4.7. Ön Giriş/Çıkış Portlarının Bağlanması

• Connect the USB 3.2 Gen.2 Type C, USB 3.2 Type A (x2), HD Audio, power switch, reset button, and HDD indicator cables from the front panel to the corresponding headers on your motherboard.

4.8. Kablo Yönetimi

• Utilize the cable routing cutouts and Velcro straps behind the motherboard tray to organize cables. This improves airflow and aesthetics.
• Ensure no cables interfere with fan blades.

5. Bilgisayar Kasasının Çalıştırılması

Once all components are installed and connected, replace the side panels. Connect your peripherals, monitor, and power cable. Press the power button on the front panel to start your system.

• The Pure Base 501 Airflow Window is designed for high airflow, ensuring efficient cooling for your components.
• The pre-installed Pure Wings 3 PWM fans offer a balance of performance and quiet operation.
• Monitor your system temperatures using software to ensure optimal performance.

6. Bakım

Düzenli bakım, PC bileşenlerinizin optimum performans ve uzun ömürlü olmasını sağlamaya yardımcı olur.

• Toz Filtreleri: The case features removable dust filters on the front, top, and bottom. Regularly clean these filters by removing them and gently brushing or washing off accumulated dust. Ensure they are completely dry before re-installing.
• İç Temizlik: Periodically open the case and use compressed air to remove dust from fans, heatsinks, and other components. Ensure the system is powered off and unplugged before cleaning.
• Dış Temizlik: Dış yüzeyleri yumuşak, damp Kumaşı sert kimyasallardan veya aşındırıcı malzemelerden uzak tutun.

7. Sorun Giderme

Sorunlarla karşılaşırsanız aşağıdaki genel sorun giderme adımlarına bakın:

For further assistance, please contact be quiet! customer support.

8. Özellikler

9. Garanti ve Destek

Your be quiet! Pure Base 501 Airflow Window PC Case comes with a 3 yıllık üretici garantisi satın alma tarihinden itibaren. Bu garanti, normal kullanımda malzeme ve işçilikteki kusurları kapsar.

For warranty claims, technical support, or any questions regarding your product, please visit the official be quiet! website or contact their customer service department. Please have your proof of purchase and product model information ready when contacting support.

Official be quiet! Webalan: www.bequiet.com