PowMr 45A 100V MPPT Güneş Şarj Kontrol Cihazı Kullanım Kılavuzu

1. Giriş

This manual provides essential information for the safe and efficient operation of your PowMr 45A 100V MPPT Solar Charge Controller. Please read it thoroughly before installation and use to ensure optimal performance and longevity of the device.

The PowMr 45A 100V MPPT Solar Charge Controller is designed to maximize power harvest from your solar panels and efficiently charge various battery types, including Sealed, LiFePO4, Gel, and Flooded batteries. It features an LCD display for parameter monitoring and adjustment, along with a USB port for convenience.

2. Güvenlik Bilgileri

• Tüm kablolama işlemlerinin yetkili personel tarafından yapıldığından emin olun.
• Always connect the battery to the controller first, then the solar panels. Disconnect in reverse order.
• Maksimum giriş volümünü aşmayıntage of 100V from the solar panels.
• Aşırı ısınmayı önlemek için kontrol ünitesini iyi havalandırılan bir alana yerleştirin.
• Kumanda cihazının doğrudan güneş ışığına maruz kalmasından kaçının.
• Use appropriate wire gauges for all connections to prevent overheating and ensure safety.

3. Ürün Bittiview

The PowMr 45A 100V MPPT Solar Charge Controller features a robust design with an intuitive interface for easy monitoring and control.

3.1. Bileşenler ve Arayüz

• LCD Ekran: Shows real-time system data such as voltage, current, power, and battery status.
• Kontrol Düğmeleri: Used for navigating menus, adjusting parameters, and switching load output.
• Güneş Enerjisi Giriş Terminalleri: Connect to solar panels (PV).
• Akü Terminalleri: Akü grubuna bağlayın.
• Yük Çıkış Terminalleri: DC yüklerine bağlayın.
• Sıcaklık Sensörü Bağlantı Noktası: For connecting the external temperature sensor (included).
• İletişim Portu: For data monitoring and control via external devices (e.g., PC, mobile app).

4. Kurulum ve Kurulum

Follow these steps for proper installation of your MPPT solar charge controller:

1. Montaj: Choose a suitable, well-ventilated location away from direct sunlight and moisture. Ensure adequate clearance around the unit for heat dissipation.
2. Kablolama Hazırlığı: Loosen the screws on the controller's wiring ports counterclockwise to accommodate the cables. Ensure the cable trough is sufficiently open.
3. Pil Bağlantısı: Connect the battery cables to the controller's battery terminals. Always connect the positive pole first, then the negative pole.
4. Güneş Paneli Bağlantısı: Connect the solar panel cables to the controller's solar input terminals. Ensure correct polarity (positive to positive, negative to negative).
5. Yük Bağlantısı: Connect your DC loads to the controller's load output terminals.
6. Sıcaklık Sensörü: Plug the temperature sensor into its dedicated port and attach the sensor to the battery to ensure accurate temperature compensation.
7. Güvenli Bağlantılar: After all connections are made, tighten all terminal screws securely. Gently tug on the wires to ensure they are firmly seated.

5. Kullanım Talimatları

5.1. Ekran Arayüzü

The LCD display provides real-time information about your solar system. Short press the up/down scroll keys on the main interface to cycle through various parameter values. The system automatically switches parameter pages every 5 seconds if no button is pressed.

• Ana arayüz: Shows solar panel input voltage, battery input voltage, and load output voltage.
• Cumulative Power Generation: Displays the total energy generated by the solar panels.
• Cumulative Discharge Capacity: Shows the total energy discharged to loads.
• Yük Göstergesi: Indicates if a load is connected and active.

5.2. Parametre Ayarları

To enter the setting interface, press and hold the SET key on the main interface. In the setting interface, use the up/down page keys to select the desired battery type (e.g., Sealed, Gel, Flooded, Lithium, or custom). Short press the SET key to select input/output parameter values for adjustment. Use the up/down keys to modify the value, then press SET again to confirm and move to the next item.

The operating system automatically saves parameters and returns to the main interface after 10 seconds of inactivity. You can also press the ESC key to quickly save parameters and return to the main interface.

If system parameters are adjusted unreasonably, a fault indication will appear when returning to the main interface. To restore factory settings, press and hold both the SET and ESC keys simultaneously for 5 seconds on the main interface.

6. Bakım

• Tüm kablo bağlantılarının sıkılığını ve korozyon olup olmadığını düzenli olarak kontrol edin.
• Kumanda ünitesini temiz tutun ve tozdan ve kirden arındırın.
• Aşırı ısınmayı önlemek için ünite çevresinde uygun havalandırma olduğundan emin olun.
• Akü terminallerinde herhangi bir aşınma veya hasar belirtisi olup olmadığını kontrol edin.

7. Sorun Giderme

• LCD Not Lighting Up: Pil hacmini kontrol edintage and ensure all cables are correctly connected.
• Pil Hacmitage Not Displayed: Verify battery connections and ensure the battery is not completely discharged.
• Solar LED Indicator Not Lit: Ensure solar panel cables are correctly connected and that there is sufficient sunlight.
• Arıza Göstergesi: If a fault icon appears, refer to the manual for specific error codes and solutions. Incorrect parameter settings can trigger faults.

8. Özellikler

9. Garanti ve Destek

Garanti bilgileri, teknik destek veya servis talepleri için lütfen resmi PowMr web sitesine başvurun. website veya doğrudan müşteri hizmetleriyle iletişime geçin. Garanti talepleri için satın alma kanıtı olarak satın alma makbuzunuzu saklayın.