BONTEC MTR-S2-PINK 2-Tier Wooden Monitor Stand Riser Instruction Manual

1. Giriş

Thank you for choosing the BONTEC MTR-S2-PINK 2-Tier Wooden Monitor Stand Riser. This product is designed to elevate your monitor to an ergonomic viewing height, reduce neck and eye strain, and provide organized storage space for your desk. Please read this manual carefully before assembly and use to ensure proper setup and optimal performance.

Image 1.1: The BONTEC 2-Tier Monitor Stand Riser in Pink, showcasing its use with a computer monitor, smartphone, keyboard, and mouse, along with books and a calculator stored on its shelves.

2. Güvenlik Bilgileri

• Montajdan önce tüm bileşenlerin eksiksiz ve hasarsız olduğundan emin olun. Herhangi bir parça eksik veya kırıksa kullanmayın.
• Çizilmeleri önlemek için standı yumuşak ve temiz bir yüzeye monte edin.
• Montaj sırasında vidaları aşırı sıkmayın, çünkü bu malzemeye zarar verebilir.
• Place the monitor stand on a stable, level surface.
• 66 pound (30 kg) olan azami yük kapasitesini aşmayın.
• Boğulma tehlikesini önlemek için küçük parçaları çocuklardan uzak tutun.

3. Paket İçeriği

Lütfen paketinizde aşağıdaki bileşenlerin tamamının bulunduğunu doğrulayın:

• Top Shelf Panel (1)
• Middle Shelf Panel (1)
• Yan Paneller (2)
• Assembly Hardware (screws, dowels, cam locks)
• Non-slip Rubber Feet (4)
• Cable Management Clip (1)
• Kullanım Kılavuzu (1)

Image 3.1: An exploded diagram illustrating all individual components of the monitor stand, including the top and middle shelves, side panels, and various assembly hardware pieces.

4. Montaj Talimatları

Follow these steps to assemble your BONTEC monitor stand:

1. Malzemeleri Hazırlayın: Unpack all parts and lay them out on a soft, clean surface to prevent damage. Identify the Top Shelf Panel, Middle Shelf Panel, and two Side Panels.
2. Attach Dowels and Cam Bolts: Insert the wooden dowels into the pre-drilled holes on the edges of the Middle Shelf Panel and the Top Shelf Panel. Screw the cam bolts into the corresponding holes on the Side Panels.
3. Connect Side Panels to Middle Shelf: Align the Middle Shelf Panel with the lower set of holes on the Side Panels. Push the dowels and cam bolts into their respective openings. Insert the cam locks into the larger holes on the outer side of the Side Panels and turn them clockwise to secure the Middle Shelf Panel.
4. Connect Side Panels to Top Shelf: Repeat the previous step for the Top Shelf Panel, aligning it with the upper set of holes on the Side Panels. Secure with cam locks.
5. Install Non-slip Feet: Carefully turn the assembled stand upside down. Attach the four non-slip rubber feet to the bottom corners of the stand to protect your desk surface and ensure stability.
6. Attach Cable Management Clip: Locate the designated slot on one of the side panels. Insert the cable management clip into this slot.

Image 4.1: A visual representation of the monitor stand's assembly process, detailing how the panels connect using dowels and cam locks.

Resim 4.2: Yakın çekim view of the non-slip rubber feet installed on the bottom of the monitor stand, designed to prevent movement and protect the desk surface.

5. Kullanım Talimatları

Once assembled, your monitor stand is ready for use:

• Monitör Yerleşimi: Place your computer monitor securely on the top shelf. Ensure it is centered and does not exceed the stand's dimensions or weight capacity.
• Depolama Organizasyonu: Utilize the middle shelf and the space beneath the stand for storing items such as laptops, keyboards, mice, books, notebooks, and other office supplies.
• Cellphone Holder: The integrated slot on the top shelf serves as a convenient holder for your smartphone, keeping it visible and accessible.
• Kablo yönetimi: Route your monitor and peripheral cables through the provided cable management clip on the side to maintain a tidy workspace.

Resim 5.1: Ayrıntılı view highlighting the integrated phone holder slot and the charging cable pass-through hole on the top shelf of the monitor stand.

Image 5.2: A close-up of the cable management clip attached to the side panel, demonstrating how it organizes multiple cables for a neat setup.

Image 5.3: A woman stretching at her desk, illustrating the ergonomic benefits of the monitor stand by elevating the screen to eye level.

6. Bakım

To ensure the longevity and appearance of your monitor stand:

• Temizlik: Sehpanın alt kısmını yumuşak bir bezle silin.amp Bez kullanın. Yüzeye zarar verebileceğinden sert kimyasallar veya aşındırıcı temizleyiciler kullanmaktan kaçının.
• Dökülmeler: The stand features a waterproof surface. In case of spills, wipe immediately with a dry cloth to prevent staining.
• Denetleme: Tüm bağlantı elemanlarının sıkılığını düzenli olarak kontrol edin. Gerekirse tekrar sıkın.

Image 6.1: A hand wiping a liquid spill from the surface of the monitor stand, demonstrating its easy-to-clean and waterproof properties.

7. Sorun Giderme

• Sehpa sallanıyor: Ensure all cam locks are fully tightened. Check that the stand is placed on a flat, stable surface.
• Desk is getting scratched: Verify that the non-slip rubber feet are properly installed on all four corners of the stand's base.
• Monitor does not fit: Confirm your monitor's base dimensions are within the stand's top surface area (16.5 inches wide). Ensure the monitor's weight does not exceed 66 pounds.

8. Özellikler

Image 8.1: A visual diagram detailing the key dimensions of the monitor stand, including its length, width, height, and shelf clearances.

9. Garanti ve Destek

BONTEC is committed to customer satisfaction. This product comes with lifetime customer support. If you encounter any issues or are not fully satisfied with your monitor stand, please contact our customer service team. We are ready to assist with returns or replacements.

For support, please visit the official BONTEC store or contact us through your purchase platform.