BONTEC Full Motion TV Monitor Wall Mounts User Manual

giriiş

Thank you for choosing BONTEC Full Motion TV Monitor Wall Mounts. This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your new wall mounts. Please read this manual thoroughly before installation and keep it for future reference. This product bundle includes two distinct models: the CT129 mount for smaller TVs (13-42 inches) and the CT139M mount for larger TVs (32-75 inches).

Güvenlik Bilgileri

WARNING: Failure to read and follow all instructions may result in personal injury or property damage.

• Montaj yüzeyinin, montaj aparatı ve ekranın toplam ağırlığını güvenli bir şekilde taşıyabileceğinden emin olun.
• SADECE ALÇI DUVAR ÜZERİNE MONTE ETMEYİN. This mount is designed for installation on solid concrete walls, brick walls, or wood studs.
• Ahşap kirişlerin yerini doğru bir şekilde tespit etmek için her zaman kiriş bulucu kullanın.
• Do not exceed the maximum weight capacity specified for each mount: 55 lbs (25 kg) for CT129 and 132 lbs (60 kg) for CT139M.
• Kullanmadan önce tüm vidaların iyice sıkıldığından emin olun. Aşırı sıkmayın.
• Montaj sırasında çocukları ve evcil hayvanları uzak tutun.
• If you have any doubts about the installation, consult a qualified professional.

Paket İçeriği

Please verify that all components are present and undamaged before beginning installation. Refer to the parts list provided in your product packaging for specific quantities of each item.

Resim: Üzeriview of the BONTEC CT129 and CT139M wall mounts, along with two HDMI cables typically included in the package.

Kurulum ve Yükleme

Kurulum Öncesi Kontroller

• Check TV VESA Pattern: Measure the horizontal and vertical distance between the mounting holes on the back of your TV. This is your VESA pattern.
• Televizyonun ağırlığını kontrol edin: Ensure your TV's weight does not exceed the maximum capacity of the chosen mount.
• Duvar Tipini Tanımlayın: Determine if your wall is concrete, brick, or wood stud. This will dictate the appropriate hardware and drilling method.

Image: Illustration of compatible wall types for secure installation: concrete, wood stud, and brick. A critical warning indicates that the mount should not be installed on drywall alone.

Step-by-Step Installation (General Guide)

1. TV askı aparatlarını TV'ye takın: Secure the vertical mounting brackets to the back of your TV using the appropriate screws and spacers from the hardware kit. Ensure the brackets are centered and level.
2. Delik İşaretleme: Hold the wall plate against the wall at your desired mounting height. Use a pencil to mark the drilling locations. For wood studs, ensure marks are centered on the stud. For concrete/brick, use a level to ensure accuracy.
3. Pilot Delikleri Delin: Drill pilot holes at the marked locations using the recommended drill bit size for your wall type.
4. Duvara monte edilecek plaka: Attach the wall plate to the wall using the provided lag bolts and washers. Tighten securely, but do not overtighten.
5. Televizyonu Duvar Plakasına Asın: Televizyonu, takılı braketlerle birlikte dikkatlice kaldırın ve duvar plakasına takın. Televizyonun sağlam bir şekilde yerine oturduğundan emin olun.
6. Televizyonu Montaj Aparatına Sabitleyin: Use the safety screws or locking mechanisms on the brackets to secure the TV to the wall plate, preventing accidental dislodgement.

VESA Uyumluluğu

The CT129 mount supports VESA patterns including 75x75mm, 100x100mm, 100x200mm, and 200x200mm.

Image: Visual representation of the different VESA mounting patterns compatible with the CT129 mount, including dimensions for each configuration.

The CT139M mount supports a wider range of VESA patterns, including 200x100mm, 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm, and 600x400mm.

Image: This diagram illustrates the range of compatible TV screen sizes (32" to 75") and the corresponding VESA mounting patterns supported by the CT139M mount, including a note about potential protrusion for smaller TVs.

Çalıştırma ve Ayarlamalar

CT129 Mount Adjustments (13-42 inch)

• Tilt: Adjust the screen tilt by +/- 10° to reduce glare and optimize viewIng.
• Döner: Swivel the TV +/- 90° left or right for flexible viewaçıları.
• Rotasyon: Ekranı dikey veya yatay yöne çevirmek için 360° döndürün.
• Uzatma/Geri Çekme: The mount extends up to 15.7 inches (40 cm) from the wall and retracts to a slim 2.7 inches (6.8 cm) to save space.

Image: This illustration demonstrates the extension and retraction range of the CT129 mount, showing it can extend up to 15.7 inches and retract to 2.7 inches from the wall.

CT139M Mount Adjustments (32-75 inch)

• Tilt: Adjust the screen tilt by +/- 8° for optimal viewIng.
• Döner: Swivel the TV up to 180° left or right, providing a wide range of viewpozisyonları.
• Seviye Ayarı: Fine-tune the TV level by +/- 3° after installation.
• Long Reach Extension: The articulated arm extends from 2.6 inches (6.6 cm) to an impressive 40.9 inches (104 cm) from the wall, offering maximum flexibility and space-saving when retracted.

Image: This diagram highlights the extensive extension range of the CT139M mount, showing it can extend from 2.6 inches to 40.9 inches, and indicates its robust 132 lbs (60 kg) weight capacity.

Image: This illustration demonstrates the 180-degree swivel range of the CT139M mount, enabling users to adjust the TV for optimal viewing from various positions in a room.

Bakım

• Temizlik: Use a soft, dry cloth to clean the mount. Avoid abrasive cleaners or solvents that could damage the finish.
• Periyodik Kontroller: Periodically check all screws and connections to ensure they remain tight and secure. If any looseness is detected, re-tighten them immediately.
• Yağlama: The articulating joints are designed for smooth movement. If any stiffness occurs over time, a small amount of silicone-based lubricant can be applied to the moving parts.

Sorun giderme

• Televizyon Düz Değil: If the TV appears unlevel after installation, check the level adjustment feature on your mount (CT139M has +/- 3° level adjustment). For CT129, ensure the wall plate and TV brackets were installed perfectly level.
• Difficulty Adjusting Movement: Ensure no cables are snagged or obstructing movement. Check that all pivot points are free from debris. If the mount feels too stiff or too loose, check the tension screws on the articulating arms and adjust as needed.
• Dağın Dengesiz Olduğu Hissediliyor: Immediately remove the TV from the mount. Re-check all wall plate and TV bracket connections. Ensure the wall anchors are properly installed and the wall type is suitable for the mount. Do not re-mount the TV until stability is confirmed.

Ürün Özellikleri

Garanti ve Destek

BONTEC products are manufactured with quality and durability in mind. For any questions, technical assistance, or to report missing/damaged parts, please contact BONTEC customer support. Please have your product model number (CT129 or CT139M) and purchase information ready when contacting support.

For the most up-to-date warranty information and support contact details, please refer to the official BONTEC webÜrün ambalajınızda bulunan site veya iletişim bilgileri.