DUMBORC X10F 10CH Receiver User Manual

giriiş

This user manual provides detailed instructions for the DUMBORC X10F 10CH 2.4GHZ Receiver. Designed for RC cars, boats, and tank models, this receiver offers reliable performance with a wide voltage range and essential safety features. Please read this manual thoroughly before operation to ensure proper setup and safe use.

Temel Özellikler

• 10 Kanal: Supports up to 10 channels for comprehensive control.
• Geniş Hacimtage Aralık: Operates within 4.8-10V, supporting high voltage servolar.
• Cilttage Receiver Support: Equipped to support the vehicle's battery voltage (isteğe bağlı).
• Güvenlik Fonksiyonları: Includes brakes and fail-safe protection for enhanced operational safety.
• Coach Interface: Features a coach interface for training modules (wireless trainer module sold separately).
• Modülasyon Modu: GFSK modulation for stable signal transmission.
• Spreading Mode: FHSS 67 channel pseudo-random frequency hopping for interference resistance.

Ürün Bittiview

Şekil 1: Ön view of the DUMBORC X10F 10CH Receiver, showing the channel ports and branding.

Şekil 2: The X10F receiver positioned in front of compatible DDF-350 and X10P-350 transmitters, illustrating its intended use with these remote controls.

Özellikler

Şekil 3: Detailed dimensions of the X10F receiver, showing its length (40mm), width (35mm), and height (13mm).

Kurulum ve Bağlama

Before operating your RC model, the X10F receiver must be properly connected and bound to your DUMBORC transmitter (e.g., DDF-350, X10P-350).

Bağlantı Şeması

Şekil 4: Illustration of the X10F receiver's key definitions, detailing functions for the left and right buttons, including gyro direction, on/off, EPA, runaway protection, channel indicator control, and PPM mode.

1. Gücü bağlayın: Connect the receiver to a power source within the 4.8-10V range. Ensure correct polarity.
2. Connect Servos/ESC: Plug your servos and Electronic Speed Controller (ESC) into the corresponding channels on the receiver. Refer to Figure 4 for channel layout.
3. Bağlama Prosedürü:
   • Turn on your transmitter and ensure it is in binding mode (refer to your transmitter's manual).
   • Power on the receiver. The LED indicator on the receiver should flash, indicating it's ready for binding.
   • Once bound, the LED on the receiver will turn solid, indicating a successful connection.
4. Fail-Safe Setup: After successful binding, set up the fail-safe positions for your model. This ensures that if signal is lost, the model will return to a predetermined safe state (e.g., throttle to neutral, steering straight). Consult your transmitter manual for specific fail-safe setting instructions.

Kullanım Talimatları

Once the receiver is successfully bound and installed in your model, you can begin operation.

Temel İşlemler

• Always turn on your transmitter first, then power on your model.
• Before each use, perform a range check to ensure proper signal reception.
• Familiarize yourself with the controls on your transmitter and how they correspond to the model's movements.

Receiver Button Functions (Refer to Figure 4)

The X10F receiver features buttons for advanced settings:

• Left Key Definition:
  • Press 1: Switch gyro direction (Note: X10F does not have built-in gyro, this function might be for compatible external modules or future versions).
  • Short press 3: Turn the gyroscope on/off (See note above).
  • Hold down to set EPA (End Point Adjustment).
• Right Key Definition:
  • Press and hold for 3 seconds: Initiate binding process or other specific functions.
  • Press 1: Set runaway protection (Fail-safe).
  • Press 2: Control any channel indicator.
  • Press 3: Enable PPM mode.

Not: While the image indicates gyro functions, the product description explicitly states "No gyro function" for the X10F. These button definitions might apply to other DUMBORC receivers or external gyro modules.

Bakım

• Temizlik: Alıcıyı temiz tutun ve toz, kir ve nemden uzak tutun. Temizlik için yumuşak, kuru bir bez kullanın. Çözücü veya sert kimyasallar kullanmaktan kaçının.
• Depolamak: Store the receiver in a cool, dry place when not in use. Avoid extreme temperatures.
• Bağlantılar: Periodically check all wire connections to ensure they are secure and free from damage. Loose connections can lead to intermittent signal loss.
• Anten: Ensure the receiver antenna is not cut, kinked, or damaged. A damaged antenna can significantly reduce range and signal quality.

Sorun giderme

Garanti ve Destek

Please note that this product is stated to have garanti yok. If you encounter any product-related issues, please contact the seller, Lubosi, directly through the platform where you purchased the item. Be prepared to provide product pictures or videos to assist with troubleshooting and resolution.

For further assistance or inquiries, please refer to the contact information provided by your retailer or the manufacturer's official channels if available.