BONTEC Full Motion TV Wall Mount Instruction Manual

1. Giriş

Thank you for choosing the BONTEC Full Motion TV Wall Mount. This manual provides detailed instructions for safe and proper installation, operation, and maintenance of your new TV mount. Please read this manual thoroughly before installation and retain it for future reference. This mount is designed for 26-60 inch LED LCD Flat & Curved TVs with a maximum weight capacity of 88 lbs (40 kgs) and VESA compatibility up to 400x400mm.

2. Güvenlik Bilgileri

• Ensure all components are present and undamaged before installation. Do not use if any parts are missing or defective.
• This product is intended for installation on solid concrete walls, brick walls, or wood stud walls. SADECE ALÇI DUVAR ÜZERİNE MONTE ETMEYİN.
• Verify the wall structure can safely support the combined weight of the mount and your TV. Consult a qualified professional if unsure.
• Do not exceed the maximum weight capacity of 88 lbs (40 kgs).
• Use appropriate safety gear during installation, including eye protection.
• Montaj sırasında çocukları ve evcil hayvanları uzak tutun.
• Tighten all screws firmly but do not overtighten to avoid stripping or damaging components.

3. Paket İçeriği

Please check the package to ensure all parts are included:

Image: Included hardware for the BONTEC TV Wall Mount.

• Duvara Montaj Düzeneği
• Concrete Anchors (x3)
• Lag Bolts (x3)
• Washers (φ6mm x3)
• Anahtar
• TV Mounting Screws: M4*12mm (x4), M4*30mm (x4), M6*15mm (x4), M6*30mm (x4), M8*20mm (x4), M8*50mm (x4)
• Spacers: D8*5mm (x8), D8*10mm (x8)
• Square Washers (M4/M6/M8)

4. Özellikler

Image: Compatibility and VESA standards for the mount.

5. Kurulum ve Kurulum

5.1 Kurulum Öncesi Kontroller

• Identify your wall type: Wood Studs, Concrete, or Brick.
• Gather necessary tools: Drill, stud finder (for wood studs), level, pencil, measuring tape, screwdriver.
• Determine the desired height and position for your TV.

Image: Applicable wall types for installation.

5.2 Braketlerin TV'ye Takılması

1. Televizyonunuzu dikkatlice, yüzü aşağı bakacak şekilde yumuşak ve temiz bir yüzeye yerleştirin.
2. Televizyonunuzun arkasındaki VESA montaj deliklerini bulun.
3. Select the correct screws (M4, M6, or M8) and spacers that fit your TV's mounting holes. Use spacers if the TV back is uneven or if screws are too long.
4. Attach the two vertical TV brackets to the back of your TV using the selected screws and washers. Ensure they are securely fastened and level.

5.3 Duvar Plakasının Montajı

1. Mark the desired drilling locations on the wall using the wall plate as a template. Use a level to ensure accuracy.
2. Drill pilot holes at the marked locations. The drill bit size will depend on your wall type and the lag bolts/anchors used.
3. For concrete/brick walls: Insert the concrete anchors into the drilled holes.
4. Align the wall plate with the drilled holes and secure it to the wall using the lag bolts and washers. Tighten firmly.

Image: The BONTEC Full Motion TV Wall Mount.

5.4 Televizyonun Asılması

1. With assistance, carefully lift the TV with the attached brackets and hook them onto the wall plate.
2. Televizyonun duvardaki montaj plakasına sağlam bir şekilde oturduğundan emin olun.
3. Kazara yerinden çıkmasını önlemek için TV askı aparatlarındaki tüm güvenlik vidalarını veya kilitleme mekanizmalarını sıkın.

Image: Easy installation process.

6. Kullanım Talimatları

The BONTEC Full Motion TV Wall Mount offers various adjustments for optimal viewDeneyim:

• Döner: The mount allows for a swivel range of up to ±90 degrees, enabling you to adjust the TV's horizontal viewing angle. Gently push or pull the TV to the desired position.
• Tilt: You can tilt the TV from +5 degrees (upward) to -10 degrees (downward) to reduce glare and optimize vertical viewing angles. Loosen the tilt adjustment knobs, set the desired angle, and re-tighten.
• Seviye Ayarı: If your TV appears slightly unlevel after installation, you can adjust it by ±3 degrees. Loosen the leveling screws, adjust the TV, and re-tighten.
• Eklenti: The mount can extend from a minimum of 3.15 inches to a maximum of 19.7 inches from the wall, providing flexibility for viewing and accessing cables.

Image: Swivel, Tilt, and Level adjustments for enhanced viewIng.

Image: Extended distance from the wall.

7. Bakım

• Tüm vidaların ve bağlantıların sıkı ve güvenli kaldığından emin olmak için düzenli olarak kontrol edin.
• Montaj parçasını yumuşak, kuru bir bezle temizleyin. Aşındırıcı temizleyiciler veya çözücüler kullanmaktan kaçının.
• Do not apply lubricants to the moving parts unless specifically instructed by the manufacturer.

8. Sorun Giderme

• Televizyon düz değil: Loosen the leveling screws, adjust the TV to the desired level, and re-tighten the screws.
• Montaj gevşek gibi görünüyor: Check all wall plate and TV bracket screws. Ensure they are tightened securely. If mounted on wood studs, verify the studs were properly located. If on concrete/brick, ensure anchors are fully seated.
• Difficulty adjusting swivel/tilt: Ensure no cables are snagged or obstructing movement. Check if adjustment knobs/screws are too tight; loosen slightly if necessary.
• Kayıp parçalar: Refer to the 'Package Contents' section. If parts are genuinely missing, contact BONTEC customer support.

9. Garanti ve Destek

BONTEC products come with a standard manufacturer's warranty. For specific warranty details, please refer to the warranty card included in your package or visit the official BONTEC website. If you encounter any issues or require technical assistance, please contact BONTEC customer support through the following channels:

• Webalan: Visit the BONTEC official webSıkça sorulan sorular ve destek iletişim bilgileri için site.
• E-posta: Refer to your product packaging or warranty card for customer service email address.

Please have your model number (MG400-US-FBA) and purchase details ready when contacting support.