Keychron K10 Max Kablosuz Özel Mekanik Klavye Kullanım Kılavuzu

giriiş

This manual provides detailed instructions for the Keychron K10 Max Wireless Custom Mechanical Keyboard. It covers initial setup, operational procedures, maintenance guidelines, troubleshooting tips, and product specifications. Please read this manual thoroughly to ensure proper use and optimal performance of your keyboard.

Paket İçeriği

Paketinizde tüm öğelerin mevcut olduğundan emin olun:

• Keychron K10 Max Kablosuz Özel Mekanik Klavye
• Type-A'dan Type-C'ye Kablo
• Type-A 2.4GHz Receiver
• Tuş Çektirmesi
• Hex Key & Screwdriver
• Additional Windows Keycaps

Image: The Keychron K10 Max keyboard displayed with its accessories, including the USB-C cable, 2.4GHz receiver, keycap puller, hex key, screwdriver, and extra keycaps.

Kurmak

1. İlk Kurulum

Before first use, it is recommended to fully charge the keyboard using the provided Type-A to Type-C cable. Connect the USB-C end to the keyboard and the USB-A end to a power source (e.g., computer USB port, USB wall adapter).

2. Bağlantı Modları

The K10 Max supports three connectivity options: 2.4 GHz wireless, Bluetooth 5.1, and wired USB-C.

Image: The Keychron K10 Max keyboard on a desk, illustrating its three connectivity options: USB Wired, 2.4GHz, and Bluetooth 5.1, connecting to a monitor, tablet, and smartphone.

2.1. 2.4 GHz Kablosuz Bağlantı

1. Locate the 2.4 GHz receiver (USB-A dongle) included in the package.
2. Plug the 2.4 GHz receiver into an available USB-A port on your computer.
3. On the keyboard, slide the mode switch (located on the back or side) to the "2.4G" position.
4. The keyboard should automatically connect. The 2.4 GHz connection provides a 1000 Hz polling rate for responsive performance.

2.2. Bluetooth 5.1 Bağlantısı

1. On the keyboard, slide the mode switch to the "BT" (Bluetooth) position.
2. Basılı tutun Fn + 1 (veya Fn + 2 / Fn + 3) key combination for 4 seconds until the backlight flashes rapidly. This indicates the keyboard is in pairing mode.
3. Cihazınızda (bilgisayar, tablet, akıllı telefon) Bluetooth'u etkinleştirin ve yeni cihazları arayın.
4. Select "Keychron K10 Max" from the list of available devices to pair.
5. The keyboard can store up to three Bluetooth devices. Switch between them by pressing Fn + 1, Fn + 2, veya Fn + 3.

2.3. Kablolu USB-C Bağlantısı

1. Connect the provided Type-A to Type-C cable to the keyboard's USB-C port and to a USB-A port on your computer.
2. Slide the mode switch on the keyboard to the "Cable" position.
3. The keyboard will function as a wired device. This mode also supports a 1000 Hz polling rate.

3. Operating System Toggle

The K10 Max is compatible with both macOS and Windows/Linux operating systems. Use the OS toggle switch located on the back or side of the keyboard to select the appropriate layout.

Image: A close-up of the Keychron K10 Max keyboard's side, showing the physical toggle switch to select between Windows/Android and macOS modes, along with the connectivity switch for Cable or Bluetooth.

• Mac/iOS: Use this setting for Apple devices. The keyboard includes Mac multimedia keys and specific keycaps.
• Win/Android: Use this setting for Windows and Android devices. Additional Windows keycaps are provided for customization.

Kullanım Talimatları

1. Key Remapping and Customization (QMK Firmware & Keychron Launcher)

The K10 Max is powered by QMK open-source firmware, allowing for extensive customization of key functions, macros, and lighting effects. The Keychron Launcher web application provides an intuitive interface for these customizations.

Image: A screenshot of the Keychron Launcher web application, showing the graphical interface for remapping keys and configuring keyboard settings.

1. Access the Keychron Launcher web app through your web tarayıcı.
2. Connect your keyboard to your computer via the USB-C cable.
3. Follow the on-screen instructions in the Launcher to remap keys, create macros, and adjust lighting.
4. Save your changes to the keyboard's firmware.

2. Arka Işık Kontrolü

The keyboard features a south-facing white LED backlight. Use the following key combinations to control the backlight:

Resim: Yakın çekim view of the Keychron K10 Max keyboard's number pad and arrow keys, showcasing the south-facing white LED backlight illuminating the key legends.

• Fn + Light Key (usually F5 or a dedicated key): Cycle through backlight effects.
• Fn + Arrow Up/Down: Arka ışık parlaklığını ayarlayın.
• Fn + Arrow Left/Right: Adjust backlight effect speed (if applicable).

3. Pil Yönetimi

The K10 Max is equipped with a 4000 mAh rechargeable battery. To maximize battery life:

• Turn off the backlight when not needed.
• Use the wired connection when possible to conserve battery.
• The keyboard can last up to 190 hours with the backlight off and approximately 100 hours at the lowest brightness setting.
• A low battery indicator (usually a flashing LED) will notify you when charging is required.

Bakım

1. Temizlik

Düzenli temizlik, klavyenin görünümünü ve işlevselliğini korumaya yardımcı olur.

• Temizlemeden önce klavyenin tüm güç kaynakları ve aygıtlarla bağlantısını kesin.
• Yumuşak, tiftiksiz bir bez kullanın ve hafifçe kurulayın.ampened with water or a mild cleaning solution to wipe the keycaps and frame. Avoid excessive moisture.
• Tuş takımları arasındaki toz ve kalıntıları temizlemek için basınçlı hava veya küçük bir fırça kullanın.
• The PBT keycaps are durable and oil-resistant, making them easy to clean.

2. Keycap Removal

To remove keycaps for cleaning or replacement:

Image: A close-up of the Keychron K10 Max keyboard, showing several double-shot PBT keycaps removed, revealing their construction and the underlying switches.

1. Use the provided keycap puller.
2. Gently hook the puller onto the sides of the keycap.
3. Pull straight up with even pressure to remove the keycap. Avoid twisting or excessive force to prevent damage to the switch.
4. Yeniden takarken, tuş kapağını anahtar gövdesiyle hizalayın ve yerine oturana kadar sıkıca bastırın.

Sorun giderme

• Klavye yanıt vermiyor:
  • Klavyenin şarjlı olduğundan emin olun.
  • Check the connectivity mode switch (2.4G, BT, Cable) is set correctly.
  • For 2.4 GHz, ensure the receiver is securely plugged in.
  • For Bluetooth, re-pair the device or try a different Bluetooth slot (Fn+1/2/3).
  • Kablolu bağlantı için, USB-C kablosunun hem klavyeye hem de bilgisayara doğru şekilde bağlı olduğundan emin olun.
  • Bilgisayarınızdaki farklı bir USB bağlantı noktasına bağlanmayı deneyin.
• Anahtarlar kayıt olmuyor veya çift yazılıyor:
  • Clean around the affected keycap to remove any debris.
  • Tuş kapağının anahtara düzgün bir şekilde oturduğundan emin olun.
  • If using wireless, ensure there is no interference and the keyboard is within range.
  • Consider updating the keyboard firmware via the Keychron Launcher.
• Arka ışık çalışmıyor:
  • Klavyenin pilinin yeterli şarjda olduğundan emin olun.
  • Parlaklığı ayarlamak için şunu kullanın: Fn + Yukarı Ok.
  • Arka ışık efektleri arasında geçiş yapmak için Fn + Işık Tuşu.
• OS layout issues (e.g., Alt/Cmd keys swapped):
  • Verify the OS toggle switch on the keyboard is set to the correct operating system (Mac/iOS or Win/Android).

Özellikler

Garanti ve Destek

Garanti bilgileri ve teknik destek için lütfen Keychron'un resmi web sitesine başvurun. website or contact Keychron customer service. Details regarding warranty periods and service procedures are available through these channels.

Official Keychron Webalan: www.keychron.com