Amewi Stingray Speedboat (Model 26108) Instruction Manual

1. Önemli Güvenlik Bilgileri

Uyarı: This product is not suitable for children under 3 years due to small parts that could be swallowed, posing a choking hazard.

• Always operate the speedboat in open water areas, away from swimmers, animals, and other watercraft.
• Ensure the operating area is clear of obstacles such as weeds, rocks, or debris that could interfere with the jet drive.
• Do not operate the boat in saltwater, as this can damage internal components.
• Keep fingers and loose clothing away from the jet drive intake and outlet during operation.
• Always remove the battery from the boat and the transmitter when not in use.
• İşlem sırasında çocukları gözetim altında tutun.

2. Kutuda Neler Var?

Lütfen paketinizin içeriğini aşağıdaki listeye göre kontrol edin:

• Amewi Stingray Speedboat Model
• 2.4GHz Uzaktan Kumanda
• Li-ion 2S 7.4V 2000mAh 15C Battery
• USB Şarj Kablosu
• Alet
• Tekne Standı
• Kullanım Kılavuzu (bu belge)

Gerekli Aksesuarlar (Dahil Değildir): 3 x 1.5V AA batteries for the remote control.

3. Kurulum Kılavuzu

3.1. Tekne Aküsünün Şarj Edilmesi

The included Li-ion 2S 7.4V 2000mAh battery powers the speedboat.

1. Connect the Li-ion battery to the USB charging cable.
2. USB şarj kablosunu uygun bir USB güç kaynağına takın (örneğin, bilgisayarın USB portuna, USB duvar adaptörüne).
3. The charging indicator on the USB cable will show the charging status (refer to the charger's specific indicator behavior).
4. Charging typically takes 90-120 minutes. Do not overcharge the battery.
5. Tamamen şarj olduktan sonra pili şarj cihazından ayırın.

Image: Internal components of the speedboat, including the battery and motor assembly.

3.2. Verici Pillerinin Takılması

The 2.4GHz remote control requires 3 x 1.5V AA batteries (not included).

1. Uzaktan kumandanın arkasındaki pil yuvasını açın.
2. 3 adet AA pili, kutupların doğru olmasına dikkat ederek (+/-) takın.
3. Pil bölmesini sıkıca kapatın.

Image: The 2.4GHz remote control for the speedboat.

3.3. Preparing the Speedboat

1. Carefully remove the top hull cover(s) of the speedboat. The boat features a double hull cover for water protection.
2. Connect the fully charged Li-ion battery to the boat's power connector.
3. Carefully place the battery inside the hull, ensuring wires are not pinched.
4. Securely reattach both hull covers to prevent water ingress. Ensure all latches or seals are properly engaged.

Resim: Üst view of the speedboat, showing the double hull cover design.

4. Kullanım Talimatları

4.1. Açma ve Eşleştirme

1. Place the speedboat gently into the water. The boat's electronics will activate upon contact with water.
2. Turn on the remote control. The remote control and boat should automatically pair. A successful pairing is usually indicated by a solid light on both devices.
3. Eşleştirme başarısız olursa, her iki cihazı da kapatın ve işlemi tekrarlayın.

4.2. Temel Kontroller

• Gaz Tetiği: Pull the trigger to move forward, push to reverse (if applicable). The jet drive provides strong acceleration.
• Direksiyon: Turn the wheel left or right to steer the boat. The thrust vector control allows for high agility and maneuverability.
• Trim Ayarları: Use the trim buttons on the remote control to fine-tune steering and throttle for straight running.
• Rash Limitation (Dual Rate): Adjust the sensitivity of the steering and throttle for different driving styles or conditions.

Resim: Arka view of the speedboat, highlighting the jet drive mechanism.

4.3. Gelişmiş Özellikler

• Switchable LED Lighting: The boat features front and rear LED lighting, which can be switched on/off via the transmitter. This is useful for operation at dusk.
• düşük hacimtage Uyarı: The 2.4GHz transmitter system includes an undervoltage warning function to prevent the boat battery from being discharged too deeply. Pay attention to audible or visual warnings from the transmitter.
• Range Warning: The transmitter will alert you if the boat is approaching or exceeding its maximum operating range (60-80 meters). Bring the boat closer immediately if this warning activates.
• Kendini Düzeltme Fonksiyonu: In case of a rollover, the boat is designed to self-right, allowing it to continue operation without manual intervention.

The Amewi Stingray Speedboat can reach speeds of up to 40 km/h and offers a driving time of up to 12 minutes on a full charge.

5. Bakım

• Her Kullanımdan Sonra:
  • Remove the boat from the water and immediately disconnect the battery.
  • Open the hull covers and carefully drain any accumulated water. Wipe the interior dry with a soft cloth.
  • Inspect the jet drive intake for any debris (weeds, leaves, etc.) and remove them carefully.
  • Clean the exterior of the boat with a damp kumaş. Sert kimyasallar kullanmayın.
  • Ensure the water cooling system's inlet and outlet are clear.
• Pil Bakım:
  • Store Li-ion batteries in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Do not store batteries fully charged or fully discharged for extended periods. Aim for a storage charge of around 50%.
• Hull Seals: Regularly inspect the rubber seals around the hull covers for any signs of wear or damage. Damaged seals can lead to water ingress.

6. Sorun Giderme

7. Özellikler

8. Garanti ve Destek

For warranty information, technical support, or replacement parts, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty claims.

Üretici: Amewi