giriiş
This manual provides essential information for the proper installation, operation, and maintenance of your Ashly TM-360 Public Address Mixer/Amplifier. The TM-360 is a 60-watt, 3-input mixer/amplifier designed for public address applications, featuring transformer-isolated constant-voltage and 4 Ohm outputs. Please read this manual thoroughly before using the product to ensure optimal performance and safety.
Güvenlik Bilgileri
Yangın, elektrik çarpması ve kişisel yaralanma riskini azaltmak için elektrikli ürünleri kullanırken her zaman temel güvenlik önlemlerine uyun. Bunlar şunları içerir, ancak bunlarla sınırlı değildir:
- Cihazı çalıştırmadan önce tüm talimatları okuyun.
- Bu cihazı suyun yakınında kullanmayınız.
- Sadece kuru bezle temizleyin.
- Havalandırma açıklıklarını kapatmayın. Üreticinin talimatlarına uygun şekilde kurulum yapın.
- Radyatörler, kalorifer ızgaraları, sobalar veya diğer cihazlar (dahil) gibi herhangi bir ısı kaynağının yakınına kurmayın. amp(ısı üreten)
- Polarize veya topraklama tipi fişin güvenlik amacını bozmayın. Polarize fişin biri diğerinden daha geniş iki bıçağı vardır. Topraklama tipi fişin iki bıçağı ve üçüncü bir topraklama ucu vardır. Geniş bıçak veya üçüncü uç sizin güvenliğiniz için sağlanmıştır. Sağlanan fiş prizinize uymuyorsa, eski prizin değiştirilmesi için bir elektrikçiye danışın.
- Güç kablosunun, özellikle fişlerde, prizlerde ve cihazdan çıktığı noktalarda üzerine basılmasını veya sıkışmasını önleyin.
- Sadece üretici tarafından belirtilen aparatları/aksesuarları kullanın.
- Yıldırımlı havalarda veya uzun süre kullanılmayacaksa bu cihazın fişini çekin.
- Tüm servisleri kalifiye servis personeline yaptırın. Cihaz herhangi bir şekilde hasar gördüğünde, örneğin güç kaynağı kablosu veya fişi hasar gördüğünde, cihaza sıvı döküldüğünde veya içine nesneler düştüğünde, cihaz yağmura veya neme maruz kaldığında, normal şekilde çalışmadığında veya düşürüldüğünde servis gereklidir.
UYARI: Yangın veya elektrik çarpması riskini azaltmak için bu cihazı yağmura veya neme maruz bırakmayın.
Ürün Bittiview
The Ashly TM-360 is a versatile public address mixer/amplifier designed for various sound reinforcement needs. Key features include:
- 3 microphone inputs for versatile audio source connectivity.
- 60-watt speaker output capable of driving 4 ohm, 8 ohm, 70 volt, or 25 volt speakers.
- Zone 2 output capable of driving external amplifiers, or a 1-watt 8 ohm speaker.
- Two-band EQ for master output for tone shaping.
- Easy-to-use controls located on the front panel for convenient operation.
Kurmak
Arka Panel Bağlantıları
The rear panel of the TM-360 provides all necessary connections for power, audio inputs, and speaker outputs. Refer to the image below for a visual guide.
Şekil 1: Ashly TM-360 Rear Panel Layout. This image displays the AC input, amplifier output terminals, Zone 2 output, mix configuration switches, input gain controls, and various audio input jacks (RCA and terminal blocks).
- AC INPUT (120V~ 60Hz, 24W): Connect the provided power cord here. Ensure the voltage yerel elektrik kaynağınıza uygundur.
- AMPLIFIER OUTPUT 60W: This terminal block provides the main speaker output.
- İletişim: Ortak topraklama bağlantısı.
- 4Ω: For 4 Ohm speakers.
- 16V OPT, 25V, 70V, 11Ω, 8Ω: Various constant voltage and low impedance output options. Connect speakers according to their impedance and desired voltage. The "LINK" terminal is for linking multiple units.
- ZONE 2 OUT: This output provides a secondary audio feed.
- PRE OUT LOW Z BAL 600Ω: Balanced low impedance pre-output for connecting to external ampcankurtaranlar
- 1W 8Ω: For connecting a single 1-watt, 8 Ohm speaker directly.
- INPUT 1 (LINE/MIC): Features a terminal block for balanced line or microphone input. Includes a gain control knob (-10 to +50 dB) and a priority over Input 2 and 3.
- INPUT 2 (RCA/Terminal Block): Offers both RCA and terminal block connections. Includes a gain control knob (-10 to +10 dB) and priority over Input 3.
- INPUT 3 (RCA): RCA input connection. Includes a gain control knob (-10 to +10 dB).
- MANUAL MUTE (CONTACT CLOSURE): Terminal block for external control.
- 1 & G = INPUT 1 TRIG: Triggers Input 1.
- G & 2 = MASTER SYSTEM STANDBY: Puts the entire system into standby mode.
Mix Configuration Switch Settings
The TM-360 features a set of DIP switches on the rear panel to configure various mixing and input behaviors. These switches are labeled 1 through 8 under "MIX CONFIGURATION".
Şekil 2: Mix Configuration Switch Settings. This image highlights the DIP switches and their corresponding functions for Zone 2 assignment, VOX trigger, mute, low cut, and phantom power.
| Anahtar | İşlev | KAPALI Konum | AÇIK Konum |
|---|---|---|---|
| 1 | Zone 2 Assign IN 1 | Input 1 not assigned to Zone 2 | Input 1 assigned to Zone 2 |
| 2 | Zone 2 Assign IN 2 | Input 2 not assigned to Zone 2 | Input 2 assigned to Zone 2 |
| 3 | Zone 2 Assign IN 3 | Input 3 not assigned to Zone 2 | Input 3 assigned to Zone 2 |
| 4 | VOX Trig IN 1 | VOX trigger for Input 1 disabled | VOX trigger for Input 1 enabled |
| 5 | VOX Trig IN 2 | VOX trigger for Input 2 disabled | VOX trigger for Input 2 enabled |
| 6 | MUTE LINK 2&3 | Inputs 2 & 3 not linked for mute | Inputs 2 & 3 linked for mute |
| 7 | DÜŞÜK KESİM | Low cut filter disabled | Low cut filter enabled |
| 8 | CH 1 MIC PHANTOM | Phantom power for Input 1 disabled | Phantom power for Input 1 enabled |
Not: Adjust these switches with the unit powered off to prevent unexpected audio behavior.
Kullanım Talimatları
Temel İşlemler
- Güç Açık: Ensure all connections are secure before plugging the unit into an AC outlet. The unit will power on automatically.
- Giriş Bağlantısı: Connect your audio sources (microphones, line-level devices) to the appropriate input jacks (Input 1, 2, or 3) on the rear panel.
- Hoparlör Bağlantısı: Hoparlörlerinizi AMPLIFIER OUTPUT terminal block, matching the impedance and voltage settings. For Zone 2, connect either an external amplifier or a 1W 8Ω speaker.
- Giriş Kazancını Ayarlayın: Use the GAIN knobs for each input to set the appropriate input level. Start with the gain at minimum and slowly increase until the desired level is achieved without distortion.
- Adjust Master Output: Use the master volume control (typically on the front panel, though not detailed in the provided image) to set the overall output level.
- Adjust Zone 2 Level: Use the ZONE 2 LEVEL knob on the rear panel to control the output level for Zone 2.
Giriş Kazancı Ayarı
Each input (Input 1, Input 2, Input 3) has a dedicated gain control knob on the rear panel. These knobs allow you to match the input sensitivity of the amplifier to the output level of your audio source.
- Giriş 1 Kazancı: Adjustable from -10 dB to +50 dB, suitable for both line and microphone levels. Input 1 has priority over Input 2 and Input 3.
- Giriş 2 Kazancı: Adjustable from -10 dB to +10 dB. Input 2 has priority over Input 3.
- Giriş 3 Kazancı: Adjustable from -10 dB to +10 dB.
To set the gain, start with the knob fully counter-clockwise (minimum gain). Play your audio source at its typical operating level and slowly turn the gain knob clockwise until the signal is clear and strong without clipping or distortion. If a signal is too hot even at minimum gain, consider using an attenuator or a different input.
Zone 2 Level Control
The ZONE 2 LEVEL knob controls the output volume for the Zone 2 output. This allows for independent volume adjustment of the secondary audio zone. Turn the knob clockwise to increase the level and counter-clockwise to decrease it. The range is from OFF to MAX.
Manual Mute Function
The MANUAL MUTE terminal block allows for external control of muting functions via contact closure.
- 1 & G = INPUT 1 TRIG: Connecting a contact closure between terminal 1 and G will trigger a specific function related to Input 1, typically muting other inputs or activating a priority override.
- G & 2 = MASTER SYSTEM STANDBY: Connecting a contact closure between terminal G and 2 will put the entire TM-360 system into standby mode, effectively muting all outputs.
Consult specific system design documentation for detailed implementation of these contact closure functions.
Bakım
The Ashly TM-360 is designed for reliable operation with minimal maintenance. Follow these guidelines to ensure longevity:
- Temizlik: Disconnect power before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or aerosol sprays.
- Havalandırma: Ensure that the ventilation openings on the unit are not blocked. Adequate airflow is crucial for preventing overheating.
- Kablo yönetimi: Periodically check all cables for wear and tear. Replace damaged cables immediately.
- Depolamak: Cihazı uzun süre saklayacaksanız, serin, kuru bir yerde, doğrudan güneş ışığından ve aşırı sıcaklıklardan uzak tutun.
No user-serviceable parts are inside. Refer all servicing to qualified service personnel.
Sorun giderme
If you encounter issues with your TM-360, consult the following common troubleshooting steps:
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Güç yok | Power cord disconnected; outlet not active; internal fuse blown. | Check power cord connection. Test outlet with another device. If fuse is suspected, contact qualified service personnel. |
| Ses çıkışı yok | Input gain too low; master volume too low; incorrect speaker wiring; input source issue; mute engaged. | Increase input gain and master volume. Verify speaker connections and impedance. Check audio source. Ensure Manual Mute is not active. |
| bozuk ses | Input gain too high; speaker impedance mismatch; faulty cable. | Reduce input gain. Verify speaker impedance matches amplifier output. Test with different cables. |
| uğultu veya gürültü | Topraklama döngüsü; arızalı kablo; diğer elektronik cihazlardan kaynaklanan parazit. | Ensure all equipment is on the same electrical circuit. Use balanced cables where possible. Isolate the unit from other electronics. |
| Zone 2 not working | Zone 2 level set to OFF; input not assigned to Zone 2; incorrect Zone 2 wiring. | Adjust ZONE 2 LEVEL knob. Check DIP switches 1, 2, 3 for correct input assignment to Zone 2. Verify Zone 2 output wiring. |
If the problem persists after trying these steps, contact Ashly customer support or a qualified service technician.
Özellikler
- Marka: Küllü
- Modeli: TM-360
- Amplifier Çıktı: 60 Watt
- Giriş Sayısı: 3 (Microphone/Line)
- Speaker Output Options: 4 Ohm, 8 Ohm, 25 Volt, 70 Volt
- Zone 2 Output: Pre Out Low Z Balanced 600 Ohm, 1 Watt 8 Ohm
- Usta EQ: Two-band
- Bağlantı Teknolojisi: Bluetooth
- Güç Kaynağı: Corded Electric (AC INPUT 120V~ 60Hz, 24W)
- Audio Input Types: Mic, Line (TRS or XLR equivalent via terminal blocks, RCA)
- UPC: 694970608528
Garanti Bilgileri
The Ashly TM-360 Public Address Mixer/AmpLifier aşağıdakilerle birlikte gelir: 5 yıllık garanti from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For specific terms, conditions, and to register your product, please refer to the official Ashly websiteye gidin veya müşteri desteğiyle iletişime geçin.
Garanti talepleri için satın alma belgenizi saklayın.
Destek
For further assistance, technical support, or service inquiries regarding your Ashly TM-360, please visit the official Ashly website or contact their customer service department. You can typically find contact information, FAQs, and additional resources on their support pages.
Ashly Ses A.Ş.
www.ashly.com