giriiş
This manual provides detailed instructions for the installation, operation, and maintenance of your ASD LED Motion Sensor Outdoor Flood Light, Model A-SFL-20BK. This advanced outdoor lighting solution features a 180° motion sensor, multiple lighting modes, adjustable color temperature, and rotatable light heads for optimal illumination and security.
Resim: The ASD LED Motion Sensor Outdoor Flood Light, Model A-SFL-20BK, shown with its packaging. This image illustrates the product's design and included components.
Güvenlik Bilgileri
Please read and understand all instructions before beginning installation. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause property damage or personal injury. Keep this manual for future reference.
- Elektriksel Güvenlik: Always turn off power at the circuit breaker before installing or servicing the fixture. Ensure all wiring connections are secure and comply with local electrical codes.
- Topraklama: The fixture must be properly grounded to prevent potential electrical shock.
- Kalifiye Elektrikçi: Kurulum sürecinin herhangi bir aşamasından emin değilseniz, yetkili bir elektrikçiye danışın.
- Çalışma Sıcaklığı: Do not operate the fixture outside its specified temperature range.
- Islak Yerler: This fixture is rated IP65 for wet locations, but ensure all seals and connections are properly secured during installation to maintain this rating.
Kurulum ve Yükleme
Follow these steps for proper installation of your flood light. Ensure power is OFF at the circuit breaker before proceeding.
1. Kuruluma Hazırlanın
- Ürünü ambalajından çıkarın ve herhangi bir hasar olup olmadığını kontrol edin.
- Gerekli tüm montaj donanımının mevcut olduğundan emin olun.
- Ana sigortadan elektriği kapatın.
2. Fikstürü Monte Etme
- Verilen vidaları kullanarak montaj braketini bağlantı kutusuna takın.
- Feed the electrical wires from the junction box through the gasket and into the fixture's wiring compartment.
- Armatürü montaj braketine sabitleyin.
3. Kablo Bağlantıları
- Bağlan siyah Armatürden gelen kablo black (live) Güç kaynağından gelen kablo.
- Bağlan beyaz Armatürden gelen kablo white (neutral) Güç kaynağından gelen kablo.
- Bağlan green (ground) Armatürden gelen kablo green or bare copper (ground) Güç kaynağından gelen kablo.
- Ensure all connections are secured with wire nuts and tucked neatly into the junction box.
4. Adjusting Light Heads
The light heads are rotatable 150° side-to-side and 180° up-and-down. Adjust them to cover your desired illumination area.
Resim: Illustration showing the 180° up-and-down and 150° side-to-side rotation capabilities of the flood light heads, allowing for precise light direction.
Resim: Detailed product specification diagram showing dimensions (10-1/4" L x 4-7/16" W x 6-13/16" H) and key features like motion sensor, photocell, 20W power, 5CCT, 2045lm brightness, and IP65 wet location rating.
Kullanım Talimatları
Your ASD LED Flood Light offers versatile operation modes and customizable settings.
1. Selecting Lighting Modes
Use the control dial on the motion sensor to select one of three operating modes:
- ZAMANINDA: The light functions as a standard lamp, staying on continuously without motion sensing.
- DUSK TO DAWN (D2D): The light automatically turns on at dusk and off at dawn, based on ambient light levels detected by the photocell.
- OTO: The light turns on and off based on motion detection and your selected lux requirement settings (L - Low sensitive / M - Middle sensitive / H - High sensitive).
Resim: Diagram illustrating the control dial for selecting ON TIME, D2D (Dusk to Dawn), and AUTO modes, with visual examples of how the light behaves in each setting.
Resim: The flood light operating at night, demonstrating the built-in dusk-to-dawn photocell functionality which automatically activates the light when ambient light levels drop.
2. Hareket Sensörü Ayarları
The integrated 180° motion sensor has a detection range of up to 60 feet. In AUTO mode, you can adjust the sensitivity:
- L (Low Sensitive): Less sensitive to movement, ideal for areas with minimal activity.
- M (Middle Sensitive): Genel kullanım için standart hassasiyet.
- H (High Sensitive): Most sensitive to movement, suitable for high-traffic areas or enhanced security.
You can also adjust the 'Hold Time' (how long the light stays on after motion is detected) and 'Ambient Light' (lux level at which the sensor becomes active) settings using the respective dials on the sensor unit.
Resim: A person walking in front of a garage, demonstrating the 180° detection angle of the high-sensitive motion sensor, which activates the flood light.
Resim: Diagram showing the flexible settings for the motion sensor, including Ambient Light (less than 10 lux), Hold Time (10 seconds to 10 minutes), and Detection Motion Speed (0.6-1.5 m/s), with a visual representation of the 60ft detection distance.
3. Color Temperature (CCT) Adjustment
The fixture offers 5 selectable color temperatures, ranging from warm to daylight. To change the CCT, locate the CCT switch on the fixture and slide it to your desired setting:
- 2700K: Yumuşak Beyaz
- 3000K: Sıcak Beyaz
- 3500K: Beyaz Nötr
- 4000K: Soğuk Beyaz
- 5000K: Gün ışığı
Resim: Visual representation of the 5 CCT options (2700K, 3000K, 3500K, 4000K, 5000K) and how they appear when the flood light is active, allowing users to select their preferred light ambiance.
Bakım
Düzenli bakım, projektörünüzün optimum performans göstermesini ve uzun ömürlü olmasını sağlar.
- Temizlik: Armatürü periyodik olarak yumuşak bir bezle temizleyin.amp Bez kullanın. Aşındırıcı temizleyiciler veya çözücüler kullanmayın, çünkü bunlar yüzeye veya elektrikli bileşenlere zarar verebilir.
- Denetleme: Annually inspect the wiring and mounting hardware for any signs of wear, corrosion, or loosening. Tighten connections as needed.
- Sensör Merceği: Keep the motion sensor lens clean and free from obstructions (e.g., dirt, spiderwebs) to ensure proper operation.
Sorun giderme
Projektörünüzle ilgili sorun yaşıyorsanız, aşağıdaki yaygın sorunlar ve çözümlere göz atın:
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Işık açılmıyor. | No power, faulty wiring, incorrect mode setting, photocell detecting too much light. | Check circuit breaker. Verify wiring connections. Ensure mode is set to AUTO or ON TIME. Cover photocell to test if it's detecting light. |
| Işık sürekli açık kalır. | Mode set to ON TIME or D2D, constant motion detected, sensor sensitivity too high. | Switch mode to AUTO. Reduce motion sensor sensitivity (L setting). Check for constant heat sources or movement in detection zone. |
| Hareket sensörü hareketi algılamıyor. | Sensor obstructed, sensitivity too low, incorrect ambient light setting. | Clean sensor lens. Increase sensor sensitivity (H setting). Adjust ambient light setting on the sensor. Ensure sensor is aimed correctly. |
| Işık titriyor veya sönükleşiyor. | Loose wiring, voltage fluctuations, incompatible dimmer (if applicable). | Check and tighten all wiring connections. Consult an electrician for voltage issues. This fixture is not designed for use with dimmers. |
Ürün Özellikleri
- Marka: otizm spektrum bozukluğu
- Model Adı: SFL A-SFL-20BK
- Parça Numarası: A-SFL-20BK
- Renk: Black with Motion Sensor
- Malzeme: Alüminyum, Polikarbonat
- Stil: Modern
- Işık Armatür Formu: Projektör
- Oda Tipi: Açık Alanlar
- Ürün Ölçüleri: 10.24"U x 4.45"G x 6.81"Y
- Ürünün Belirli Kullanımları: Dış mekan
- İç/Dış Mekan Kullanımı: Dış mekan
- Güç Kaynağı: Sabit kablolu
- Kurulum Türü: Dağı Flush
- Özel Özellikler: 180° 3 Modes Motion Sensor and Photocell, 5 Color Temperature Options, Beam Angle 100°, Rotatable Light Heads for Directional Light Control, Wet Locations Rated (IP65)
- Kontrol Yöntemi: Remote (referring to sensor adjustments, not a physical remote)
- Işık Kaynağı Türü: NEDEN OLMUŞ
- Cilttage: 120 Volt
- Aydınlatma Yöntemi: Ayarlanabilir
- Ürün Ağırlığı: 1 Pound
- Netage: 20 watt
- Birim Sayısı: 1.0 Sayım
- Montaj Tipi: Duvara Montaj
- Fikstür Tipi: Çıkarılamaz
- UPC: 810128113458
- Sertifikalar: UL, DLC Premium
- Ömür: 145,000 saat
Garanti Bilgileri
This ASD LED Motion Sensor Outdoor Flood Light (Model A-SFL-20BK) is covered by a 5 yıllık sınırlı garanti Satın alma tarihinden itibaren geçerlidir. Bu garanti, normal kullanım koşullarında malzeme ve işçilik kusurlarını kapsar. Yanlış montaj, kaza, yanlış kullanım, kötüye kullanım veya yetkisiz değişikliklerden kaynaklanan hasarları kapsamaz.
For warranty claims or further details, please retain your proof of purchase and contact customer support.
Müşteri Desteği
If you have any questions, require technical assistance, or need to report an issue with your ASD LED Motion Sensor Outdoor Flood Light, please contact our customer support team.
Please visit the official ASD website for the most current contact information, including phone numbers, email addresses, and online support resources.
Çevrimiçi Kaynaklar: Visit the ASD Store on Amazon