FÜLEN CL04

FULEN LED Under Cabinet Light (Model CL04) Instruction Manual

Model: CL04

1. Giriş

Thank you for choosing the FULEN LED Under Cabinet Light. This versatile, rechargeable light features a motion sensor, adjustable color temperatures, and dimmable brightness, making it ideal for various indoor applications such as closets, cabinets, kitchens, and hallways. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance.

2. Temel Özellikler

  • Yüksek Kapasiteli Şarj Edilebilir Pil: Built-in 4000mAh battery provides over 10 hours of continuous light at maximum brightness or 1-2 months in AUTO mode on a full charge.
  • Hassas Hareket Sensörü: Automatically turns on in dim conditions when motion is detected and turns off after 20 seconds of no motion.
  • Ayarlanabilir Renk Sıcaklıkları: Choose from 3000K (warm light), 4000K (natural light), and 6000K (white light).
  • Kademesiz Karartma: İhtiyaçlarınıza uygun olarak parlaklığı %10 ile %100 arasında ayarlayın.
  • Bright and Wide Illumination: 15-inch (38cm) length with 32 lamp beads provides 280 lumens of soft, eye-protective light.
  • Kolay Kurulum: Features built-in magnets for attachment to metal surfaces and includes adhesive iron sheets for non-metallic surfaces. Easily removable for charging.

3. Paket İçeriği

Lütfen tüm öğelerin mevcut olduğundan emin olmak için paketi kontrol edin:

  • FULEN LED Under Cabinet Light Bar
  • USB-C Şarj Kablosu
  • Adhesive Metal Sheets (for mounting)
  • Kullanıcı Kılavuzu

4. Kurulum ve Kurulum

The FULEN LED Under Cabinet Light offers simple, tool-free installation.

  1. Başlangıç ​​ücreti: Before first use, fully charge the light using the provided USB-C cable. The charging port is located on the side of the light bar. A full charge typically takes less than 2 hours.
  2. Kurulum Konumunu Seçin: Select a clean, smooth, and dry surface under a cabinet, inside a closet, or any desired area.
  3. Yüzeyi Hazırlayın: Clean the chosen surface thoroughly to ensure optimal adhesion for the metal sheets.
  4. Attach Metal Sheets: Peel off the protective film from one side of the adhesive metal sheets and firmly press them onto the desired installation surface. Ensure they are spaced appropriately to align with the magnets on the light bar.
  5. Işık Çubuğunu Monte Edin: The light bar has built-in magnets. Simply align the light bar with the installed metal sheets and it will magnetically attach. This allows for easy removal for charging or repositioning.
Installation steps for FULEN LED Under Cabinet Light

Image: Visual guide showing the three steps of installation: sticking the metal plate, peeling off the adhesive, and pasting the light bar.

Video: A seller-provided video demonstrating how to install the under cabinet lights, including attaching the magnetic strips and mounting the light bar.

5. Kullanım Talimatları

The FULEN LED Under Cabinet Light features multiple modes and adjustable settings for convenience.

Control panel of FULEN LED Under Cabinet Light

Image: Close-up of the light bar's control panel, showing the long press/short press button, ON/AUTO/OFF switch, Type-C charging port, motion sensor, and hand-sweep sensor port.

5.1. Mod Seçimi

Use the ON/AUTO/OFF slide switch to select the desired operating mode:

  • KAPALI: Işık tamamen kapalı.
  • AÇIK: The light remains continuously on. Ideal for tasks requiring constant illumination.
  • OTO: Motion sensor mode. The light will automatically turn on when motion is detected in dim environments and turn off after 20 seconds of no motion.

5.2. Renk Sıcaklığını Ayarlama

In ON mode, short press the control button (labeled with a lightbulb icon) to cycle through the three color temperatures:

  • Sıcak Işık (3000K)
  • Doğal Işık (4000K)
  • Beyaz Işık (6000K)
Three color temperatures of FULEN LED Under Cabinet Light

Image: Demonstrates the three available color temperatures: 3000K (warm), 4000K (natural), and 6000K (white).

5.3. Parlaklık Ayarı (Kademesiz Karartma)

In ON mode, long press the control button (labeled with a lightbulb icon) to adjust the brightness. The brightness will cycle smoothly between 10% and 100%. Release the button when the desired brightness level is reached.

5.4. Hareket Sensörü İşlevselliği

When in AUTO mode, the light's motion sensor detects movement within a 13-foot (4m) range and a 120° PIR detection angle. The light will only activate if the ambient environment is dim enough. It will automatically turn off after 20 seconds if no further motion is detected.

FULEN LED Under Cabinet Light motion sensor range

Image: Illustrates the motion sensor's detection range of 13 feet (4m) and 120-degree angle, showing a person walking past the light.

5.5. Hand-Sweep Sensor

The light also features a hand-sweep sensor for convenient on/off control without touching the main button. Simply wave your hand across the dedicated hand-sweep sensor port to toggle the light.

6. Charging the Light

The FULEN LED Under Cabinet Light is equipped with a 4000mAh rechargeable lithium-ion battery.

  • Şarj Göstergesi: The light features an indicator that shows charging status.
  • Şarj Süresi: Tam şarj yaklaşık 2 saat sürüyor.
  • Pil Ömrü: Provides over 10 hours of continuous use at maximum brightness. In AUTO mode, it can last 1-2 months depending on activation frequency.
  • Düşük Pil: If the light appears dim upon arrival or during use, fully charge it before continued use.
FULEN LED Under Cabinet Light 4000mAh rechargeable battery

Image: Illustrates the 4000mAh rechargeable battery and its charging process via a USB-C cable.

7. Özellikler

Model NumarasıCL04
MarkaFÜLEN
Pil Kapasitesi4000mAh Lityum Pil
Giriş5V/2A
Renk Sıcaklığı3000 / 4000 / 6000
Algılama Mesafesi13 FT (4m)
PIR Algılama Açısı120°
Otomatik Kapanma Süresi20 seconds (in AUTO mode)
Ürün Boyutları37.5x4.2x1.6 cm
Ağırlık210 gr
MalzemeAlüminyum, Plastik

8. Sorun Giderme

If you encounter any issues with your FULEN LED Under Cabinet Light, please refer to the following common solutions:

  • Işık yanmıyor: Ensure the light is charged. Check the ON/AUTO/OFF switch is in the correct position.
  • Hareket sensörü çalışmıyor: Verify the light is in AUTO mode. Ensure the environment is dim enough for activation. Check for obstructions blocking the sensor.
  • Pil şarj tutmuyor: Ensure the charging cable is properly connected. Use a compatible 5V/2A power adapter. If issues persist, contact customer support.
  • Işık çok loş: Adjust the brightness by long-pressing the control button. Ensure the battery is fully charged.

9. Bakım

To ensure the longevity and optimal performance of your FULEN LED Under Cabinet Light:

  • Clean the light surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Aydınlatma cihazını aşırı sıcaklıklara veya yüksek neme maruz bırakmaktan kaçının.
  • Do not disassemble the product, as this may void the warranty and cause damage.

10. Garanti ve Destek

This FULEN product comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or any questions regarding your product, please refer to the contact information provided with your purchase or visit the official FULEN webalan.

© 2024 FULEN. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.