1. Giriş
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your CREWORKS 1.5-30mm Electric Wire Stripping Machine. This automatic wire stripper is designed to remove plastic and rubber insulation from old electrical wires, facilitating copper recovery. It features a 180W motor, capable of stripping wires at speeds up to 30 meters per minute, with a low noise level of 25 dB. The machine is equipped with 5 distinct feed channels, accommodating wire widths from 1.5 mm to 30 mm, making it suitable for a wide range of common wire sizes. Its durable construction, featuring a reinforced aluminum alloy frame and steel blades, ensures long-term reliability. A built-in cooling fan prevents overheating during extended use. Please read this manual thoroughly before operating the machine.
Figure 1: CREWORKS 1.5-30mm Electric Wire Stripping Machine.
2. Güvenlik Talimatları
Yaralanmaları ve makineye zarar gelmesini önlemek için lütfen aşağıdaki güvenlik yönergelerine daima uyun:
- Kılavuzu okuyun: Çalıştırmadan önce tüm talimatları ve uyarıları anlayın.
- Kişisel Koruyucu Donanım (KKD): Daima koruyucu gözlük, eldiven ve uygun iş kıyafeti giyin. Hareketli parçalara takılabilecek bol kıyafetlerden veya takılardan kaçının.
- Çalışma Alanı: Ensure your work area is clean, well-lit, and free from obstructions. Keep children and bystanders away from the machine during operation.
- Elektriksel Güvenlik: Connect the machine to a properly grounded power outlet. Do not operate in wet conditions or with wet hands. Inspect the power cord for damage before each use.
- Bıçak Güvenliği: The blades are extremely sharp. Exercise extreme caution when adjusting or cleaning them. Always disconnect power before performing maintenance.
- Acil durdurma: Acil durdurma düğmesinin yerini ve işlevini öğrenin.
- Tel Uyumluluğu: Only strip wires within the specified diameter range (1.5 mm to 30 mm).
- Havalandırma: Ensure adequate ventilation to prevent motor overheating. The integrated cooling fan assists in this.
- Güvenli Yerleştirme: Anchor the machine to a stable workbench or surface before use to prevent movement during operation.
3. Paket İçeriği
Paketin içinde tüm öğelerin mevcut olduğundan emin olun:
- 1 x CREWORKS Electric Wire Stripping Machine
- 1 x Kullanım Kılavuzu
- 2 x Hex Wrenches (for adjustments)
- 1 x Ventilation Plug
- 2 x Koruyucu Eldiven
Figure 2: Package contents of the wire stripping machine.
4. Ürün Bittiview
Familiarize yourself with the components of the wire stripping machine:
Figure 3: Product Diagram with labeled parts.
- Motor: Provides power for the stripping mechanism.
- Blade Adjustment Knobs: Used to precisely set the blade height for different wire diameters.
- Gözlem Penceresi: Allows visual inspection of the stripping process.
- Blade Support: Holds the stripping blades in place.
- Bıçak: The cutting component that removes wire insulation.
- Silindir: Guides the wire through the stripping mechanism.
- Feed Hole Plate: Features multiple channels for various wire sizes.
- Durdurma Butonu (Kırmızı): Immediately halts machine operation.
- Start Button (Green): Initiates machine operation.
- Güç Kablosu: Connects the machine to the electrical supply.
Figure 4: Five distinct feed channels for various wire sizes.
5. Kurulum
- Paketin açılması: Carefully remove the machine and all accessories from the packaging. Retain packaging for future storage or transport.
- Atama: Place the wire stripping machine on a stable, level, and secure workbench. Use the mounting holes on the base to anchor the machine if prolonged or heavy-duty use is anticipated.
- Güç Bağlantısı: Ensure the machine's power switch is in the 'OFF' position. Connect the power cord to a suitable grounded electrical outlet (refer to specifications for voltage gereksinimler).
- Blade Height Adjustment: Before stripping, adjust the blade height using the adjustment knobs. Select the appropriate feed channel for your wire diameter. Turn the adjustment knob until the blade just touches the insulation of the wire without cutting into the copper conductor. Test with a small piece of wire first.
Figure 5: Close-up of the ultra-sharp blades and V-shaped rollers.
6. Kullanım Talimatları
Güvenli ve etkili kablo soyma işlemi için şu adımları izleyin:
- Kabloyu hazırlayın: Ensure the wire is straight and free of kinks or bends.
- Kanal Seçin: Choose the feed channel that best matches the diameter of the wire you intend to strip.
- Bıçağı Ayarlayın: Fine-tune the blade height using the adjustment knob for the selected channel. The blade should score the insulation without damaging the conductor.
- Makineyi Başlat: Press the green 'Start' button to power on the machine.
- Besleme Teli: Carefully insert the end of the insulated wire into the chosen feed hole. The rollers will automatically pull the wire through the machine.
- Soyulmuş kabloyu toplayın: The stripped insulation will separate from the copper conductor, which will exit from the rear of the machine. Collect the stripped copper.
- Acil durdurma: In case of any malfunction or emergency, immediately press the red 'Stop' button.
- Kapat: After use, press the red 'Stop' button and disconnect the machine from the power supply.
Figure 6: Easy-to-follow steps for operating the wire stripping machine.
Figure 7: The machine handles various wire types and sizes.
7. Bakım
Regular maintenance ensures optimal performance and extends the lifespan of your machine:
- Temizlik: After each use, disconnect the power and clean the machine. Remove any accumulated insulation debris from the blades, rollers, and feed channels using a brush or compressed air.
- Bıçak Denetimi: Periodically inspect the blades for wear, dullness, or damage. Sharp blades are crucial for efficient stripping. Replace dull or damaged blades promptly.
- Yağlama: Apply a small amount of light machine oil to moving parts, such as the blade adjustment mechanism and rollers, as needed to ensure smooth operation.
- Soğutma Fanı: Ensure the cooling fan is free from dust and debris to maintain effective heat dissipation.
- Depolamak: Kullanılmadığı zaman makineyi kuru ve temiz bir ortamda saklayın.
Figure 8: The powerful cooling fan helps prevent overheating.
8. Sorun Giderme
Yaygın sorunlar ve çözümleri için bu bölüme bakın:
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Makine başlamıyor | No power supply; Emergency stop engaged; Faulty power cord/switch | Check power connection; Release emergency stop; Inspect power cord/switch, contact support if necessary |
| Wire not stripping cleanly | Incorrect blade height; Dull or damaged blades; Wrong feed channel selected | Adjust blade height; Replace blades; Select appropriate feed channel |
| Wire gets stuck or jams | Wire is bent/kinked; Debris in feed channel; Rollers are dirty | Straighten wire; Clean feed channels; Clean rollers |
| Aşırı gürültü veya titreşim | Loose components; Lack of lubrication; Motor issue | Check for loose screws and tighten; Lubricate moving parts; Contact support for motor issues |
9. Özellikler
| Şartname | Detay |
|---|---|
| Marka | CREWORKS |
| Model Numarası | WSM-NM30-DE |
| Ürün Boyutları (U x G x Y) | 22x17x0.1 cm |
| Ürün Ağırlığı | 9.8 Kilogram |
| Malzeme | Aluminum Alloy, Steel, Plastic |
| Renk | Gümüş desenli siyah |
| Cutting Width (Wire Diameter Range) | 1.5 - 30 mm |
| Motor Gücü | 180W |
| Soyma Hızı | Up to 30 m/min |
| Gürültü Seviyesi | 25 dB |
| Number of Feed Channels | 5 |
| Uyumlu Özellikler | CE |
| Belirli Ürün Kullanımları | DIY, construction sites, electrical maintenance |
| Menşei ülke | Çin |
10. Garanti ve Destek
For warranty information, please refer to the documentation included with your purchase or contact the retailer. For technical support, spare parts, or service inquiries, please contact CREWORKS customer service through their official website or the contact information provided in your purchase documentation. Please have your model number (WSM-NM30-DE) and purchase date available when contacting support.