Lumens VS-KB21 IP Kamera Denetleyicisi

1. Giriş

The Lumens VS-KB21 is an advanced IP camera controller designed for professional video production environments. It provides comprehensive control over up to 255 IP-connected cameras, supporting various communication interfaces including RS-232, RS-422, and Ethernet. Key features include a 4-axis joystick for precise Pan/Tilt/Zoom control, a 3-inch LCD for RTSP preview, and user-assignable keys for quick access to functions. This manual provides detailed instructions for setting up, operating, and maintaining your VS-KB21 controller.

2. Ürün Bittiview

Familiarize yourself with the components and controls of the VS-KB21 controller.

2.1 Ön Panel Kontrolleri

Şekil 1: Ön view of the Lumens VS-KB21 IP Camera Controller, showing the joystick, LCD screen, and various control buttons and knobs.

• Oyun kolu: 4-axis control for Pan, Tilt, and Zoom.
• LCD Ekran: 3-inch display for RTSP video preview ve menü navigasyonu.
• Düğmeler: Dedicated controls for Iris, Shutter, Gain, White Balance, and Focus.
• Klavye: Numeric and function keys for camera selection, preset recall, and menu input.
• User-Assignable Keys (F1, F2): Özelleştirilebilir fonksiyon düğmeleri.
• Zoom Seesaw Lever: For precise zoom control (Tele/Wide).

2.2 Arka Panel Bağlantıları

Şekil 2: Arka view of the Lumens VS-KB21 IP Camera Controller, highlighting the connectivity ports.

• RS-422 Bağlantı Noktası: For serial communication with cameras.
• RS-232 Bağlantı Noktası: For serial communication with cameras.
• SERVİS Limanı: USB port for firmware updates and service.
• ETHERNET Bağlantı Noktası: RJ-45 connector for IP control and PoE (Power over Ethernet).
• DC GİRİŞİ 12V: Birlikte verilen DC adaptör için güç girişi.
• Güç düğmesi: On/Off switch for the unit.
• LOCK Slot: For security cable.

3. Kurulum

Follow these steps to set up your VS-KB21 controller.

1. Güç Bağlantısı:
   • Connect the provided DC 12V power adapter to the 'DC IN 12V' port on the rear panel and plug it into a power outlet.
   • Alternatively, if using a PoE-enabled network switch, connect an Ethernet cable from the switch to the 'ETHERNET' port. The unit will power on via PoE.
2. Network Connection (for IP Control):
   • Connect an Ethernet cable from the 'ETHERNET' port on the controller to your network switch or router. Ensure the controller and IP cameras are on the same network segment.
3. Serial Connection (for RS-232/RS-422 Control):
   • For RS-232 control, connect a serial cable from the 'RS-232' port on the controller to the camera's RS-232 port.
   • For RS-422 control, connect a serial cable from the 'RS-422' port on the controller to the camera's RS-422 port.
4. İlk Güç Açma:
   • Flip the 'POWER' switch to the ON position. The LCD screen will illuminate, and the controller will initialize.
5. Kamera Yapılandırması:
   • Access the controller's settings menu via the LCD to add and configure your IP or serial cameras. Refer to the on-screen prompts for IP address, port, and protocol settings (VISCA, VISCA Over IP).

4. Kullanım Talimatları

This section details the operation of the VS-KB21 controller for managing your cameras.

4.1 Kamera Seçimi

• Press the 'CAM LIST' button to view a list of configured cameras.
• Use the numeric keypad (CAM 1-7) or the joystick to select the desired camera.
• Seçiminizi onaylamak için 'ENTER' tuşuna basın.

4.2 Pan, Tilt ve Yakınlaştırma (PTZ) Kontrolü

• Yatay/Dikey Hareket: Move the 4-axis joystick left/right for pan and up/down for tilt.
• Yakınlaştır: Rotate the joystick head or use the 'TELE' (zoom in) and 'WIDE' (zoom out) buttons on the seesaw lever.
• PTZ Speed: Adjust the 'PTZ SPEED' knob to control the responsiveness of the joystick.

4.3 Odak Kontrolü

• Press the 'AUTO FOCUS' button for automatic focus adjustment.
• For manual focus, use the 'FOCUS' knob: rotate 'NEAR' to focus on closer objects, 'FAR' for distant objects.

4.4 Pozlama ve Beyaz Dengesi

• Pozlama Modu: Press 'EXPOSURE MODE' to cycle through auto, manual, and shutter priority modes.
• Iris/Shutter/Gain: Use the dedicated knobs to adjust these parameters in manual exposure mode.
• Beyaz Dengesi: Press 'WB MODE' to select white balance presets or 'ONE PUSH WB' for automatic one-push white balance.

4.5 Ön Ayarlar

• Bir Ön Ayarı Kaydetme: Position the camera as desired, then press 'SAVE' followed by a numeric key (0-9) to store the preset.
• Bir Ön Ayarı Geri Çağırma: Press 'CALL' followed by the numeric key corresponding to the saved preset.

4.6 RTSP Preview

• The 3-inch LCD screen supports RTSP video preview from the selected IP camera. Ensure the camera's RTSP stream is correctly configured in the controller's settings.
• Press 'PVW' to toggle the preview Açık/Kapalı.

5. Bakım

Proper maintenance ensures the longevity and optimal performance of your VS-KB21 controller.

• Temizlik: Use a soft, dry cloth to clean the exterior of the controller. For stubborn marks, a slightly damp Hafif deterjanlı bir bez kullanılabilir, ancak cihaza sıvı girmemesine dikkat edilmelidir.
• Depolamak: Kumanda cihazını kullanılmadığı zamanlarda serin, kuru ve doğrudan güneş ışığından ve aşırı sıcaklıklardan uzak bir yerde saklayın.
• Donanım Yazılımı Güncellemeleri: Periodically check the Lumens official website for firmware updates. Updates can be installed via the 'SERVICE' USB port.
• Sıvılardan Kaçının: Kumanda cihazını suya veya diğer sıvılara maruz bırakmayın.
• Etkiden Kaçının: Protect the device from physical shocks and drops, especially the joystick.

6. Sorun Giderme

Yaygın sorunlara yönelik çözümler için bu bölüme bakın.

7. Özellikler

Detailed technical specifications for the Lumens VS-KB21 IP Camera Controller.

8. Garanti ve Destek

For warranty information, technical support, or service inquiries, please visit the official Lumens webYetkili satıcınızla iletişime geçin veya siteyi ziyaret edin. Garanti talepleriniz için satın alma belgenizi saklayın.

Lümen Webalan: www.mylumens.com