microSHIFT TS38 Thumb-Tap Shifter Set

giriiş

This manual provides detailed instructions for the installation, operation, and maintenance of your microSHIFT TS38 Thumb-Tap Shifter Set. Designed for bicycles with 7-speed rear drivetrains and triple chainrings, these shifters offer light shifting effort and an easy-to-read gear indicator for a reliable cycling experience. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your shifters.

Ürün Bittiview

This image displays the microSHIFT TS38 Thumb-Tap Shifter Set. The left shifter is designed for triple chainrings, indicated by the '1-3' gear display, while the right shifter is for 7-speed rear drivetrains, indicated by the '1-7' gear display. Both shifters feature ergonomic thumb triggers for operation.

The microSHIFT TS38 shifters are engineered for compatibility with Shimano 7-speed drivetrains. They feature an optical gear indicator for quick reference of your current gear and ergonomic thumb triggers for comfortable and precise shifting.

Kurulum ve Yükleme

Doğru kurulum, en iyi performans için çok önemlidir. Herhangi bir adımda emin değilseniz, nitelikli bir bisiklet tamircisinden yardım almanız önerilir.

1. Gidona Montaj:
   • Cl'yi gevşetinamp bolts on both shifters.
   • Slide the shifters onto your bicycle's handlebars, positioning them comfortably within reach of your thumbs. Ensure they do not interfere with brake levers or other handlebar accessories.
   • Once positioned, tighten the clamp bolts securely. Do not overtighten.
2. Kablo Yönlendirmesi:
   • Ensure your bicycle's derailleur cables are in good condition and properly routed through the frame's cable guides.
   • Insert the shift cable into the designated port on each shifter.
   • Route the cable through the shifter body and out the cable exit point.
3. Connecting to Derailleurs:
   • For the right (rear) shifter, connect the cable to the rear derailleur's cable anchor bolt.
   • For the left (front) shifter, connect the cable to the front derailleur's cable anchor bolt.
   • Pull the cable taut and secure it with the anchor bolt. Leave some slack for fine-tuning.
4. İlk Ayarlama:
   • With the cables connected, perform initial adjustments to the derailleur limit screws and cable tension. Refer to your bicycle's derailleur manual for specific adjustment procedures.
   • Shift through all gears to ensure smooth and precise operation. Use the barrel adjusters on the shifters or derailleurs for fine-tuning cable tension.

Operating Your Shifters

The microSHIFT TS38 shifters are designed for intuitive operation using thumb-tap actions.

• Shifting Up (Higher Gear/Larger Chainring):
  • To shift to a higher gear on the rear cassette (smaller cog) or a larger chainring on the front, firmly press the main thumb lever (the larger lever) forward.
  • The optical gear indicator will show the new gear position.
• Shifting Down (Lower Gear/Smaller Chainring):
  • To shift to a lower gear on the rear cassette (larger cog) or a smaller chainring on the front, press the smaller thumb lever (release lever) with your thumb.
  • The optical gear indicator will show the new gear position.
• Dişli Göstergesi:
  • The clear window on top of each shifter displays your current gear.
  • The right shifter indicates the rear cassette gear (1-7).
  • The left shifter indicates the front chainring position (1-3 for triple).

Always pedal forward while shifting to ensure smooth gear changes and prevent damage to your drivetrain components.

Bakım

Regular maintenance will extend the life and performance of your shifters.

• Temizlik:
  • Periodically wipe down the shifter bodies with a clean, damp kiri ve kiri temizlemek için bez.
  • Avoid using harsh chemicals or solvents, as they may damage the plastic components or finish.
• Yağlama:
  • Apply a small amount of light lubricant to the pivot points of the shifter levers and the exposed sections of the shift cables where they enter the shifter body.
  • This helps maintain smooth operation and prevents corrosion.
• Kablo Denetimi:
  • Regularly inspect shift cables for fraying, kinks, or corrosion. Damaged cables can lead to poor shifting performance.
  • Replace cables and housing as needed, typically annually or more frequently depending on riding conditions.
• Genel Kontrol:
  • Ensure all mounting bolts are secure.
  • Check for any excessive play in the levers.

Sorun giderme

If you encounter issues with your shifters, try these common solutions:

Özellikler

Garanti ve Destek

microSHIFT products are manufactured to high standards and are designed for durability and performance. For specific warranty information regarding your TS38 Thumb-Tap Shifter Set, please refer to the warranty card included with your purchase or visit the official microSHIFT website. For technical support, replacement parts, or further assistance, please contact microSHIFT customer service through their official channels.

Webalan: www.microshift.com (Lütfen resmi bilgileri kontrol edin) web(En güncel iletişim bilgileri ve destek kaynakları için lütfen siteyi ziyaret edin.)